I have a list of names in column A and days across row 1, with a tick where each name is working. I need a formula to be able to count how many names are working a sixth day in each week.
View 9 RepliesI have a workbook with a collumn full of football championships. As you know there are hundreds of different championships names. And i have a collumn with all of them but some are repeated over and over because this collumn is connected with values of profit/loss in another collumn. For example: Blue Square North (Collumn A1) and in collumn B1 1.75; then Blue Square North (Collum A2) and 2.98 (Collumn B2), and over and over...
So what i need is a formula that retrieves all unique and different names in a range collumn and the puts all the dfferent names in a new collumn (lets say C). Because what i intend to do then is to use vlookup to search for the championships one by one (through collumn C) and count the ones with profit and them loss by the name of each one.
So what i need is a way to retrive a list of the unique names in A and get them in C.
I have a sheet with about 20000 rows consisting of hundreds of names which
occur randomly.After each name is a date of the type 29-Jan-06.The dates are in ascending order.I wish to print in a third column how long it is in days since that name appeared previously in the list,if it never appeared before this will be zero.
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
I have a long list of names in Column A sorted alphabetcially. I dont know how long the list is.
I wish to find the start and end row numbers of names that begin with a specific letter, for example if the letter is B I want the first row number that starts with B and the row number that ends with B. Assuming the letter I want to use is in C1, here is what I came up with:
I am trying to create a summary Calendar that would display all the names of the people who are off on a given day. I have a grid where I display each day of the month and a person in the group has their own column. If they are out of the office for any reason their name appears in that row. In the big Summary Calendar cell for each day of the month I want to look across all the people columns for that day and then display the names of the people who are not going to be in the office. Can I do this by a formula or will using VBA work best.
View 6 Replies View RelatedI need to compare two lists of client names. One list has 59k names to be compared to second list of 1000 names.
The list of 59k are listed in column D and the other list is in Column E. I tried conditional formatting but unfortunately some of the names are slightly different I.e. fair point communications vs fair point communications inc. I was trying to put in v lookup with a trim function but it didn't seem to be working.
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedIs it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
I'm trying to sort out a list of names from a website that publishes names in the following format:
DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel
What I'd like to do is get the names in the following format
John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez
Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.
I found the following function, here: [URL] ...
but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.
create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?
The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.
I need to create a function that selects 4 names randomly from a list of 15 names and displays the 4 randomly selected names in the one cell. Also, you cannot repeat the same name in that cell, (i.e. bob cannot be selected twice in his group of four)
View 1 Replies View RelatedI have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name
And the other column lists the names as first name and then last name without the comma
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies View RelatedI do not have any code for this as I am unsure if it is possible. I have a list of range names in a column (A) that refer to different sheets and in an adjacent column (B) I have a list of data. Is it possible to write VBA code that will allow me to copy each value in column B to the corresponding cell in the workbook that relates to the range name in column A.
View 2 Replies View RelatedI have an excel sheet with 30 names in column A and I'm asked to do the following:
Write a procedure – a sub – that uses an input box to ask for a name. The procedure should then scan through the names in the list to search for the name and make a message box to state “X is not in the group” or “X is in the group”, where X is the name from the input box. HINT: You can make a variable “found” that starts with the value 0 and gets the value 1 if the name is found in the list.
Im still pretty new toi VBA and im struggling with pulling data from another worksheet and placing it into a list. Below is the code currently I think I have identified were its not working but not sure what to do. the code should essentially do the following
on opening the workbook check CS PS data worksheet find the names of people within the sheet, These start at row six and the step between each is 82 it then should input these names one after another in the following range Range("AO3:AO43") one name per cell until the end of the dat,a it seems to run but only inputs the first name in the first cell even thought it picks up each name in the myformula piece
Within the myformula there is a concatenate piece to flip the names to opposite way round I think this is where is not working possibly something to do with the separators? each name is in the format surname, firstname it should flip it so it shows first name [space] last name
provide ive commented out the piece I think is the issue
Sub CSupdate_()
With Application
.Calculation = xlManual
.ScreenUpdating = False
[Code]...
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
View 4 Replies View RelatedI've created a very simple formula which counts the number of days from Today and excludes blanks.
I'm trying to set it up so the formula *stops* counting the days once a cell in column C is populated.
Formula so far...
Code:
=IF(A3="", "",A3 - TODAY())
It looks exactly like this this [URL] .....
I have a form in which users will manually enter a date in Column A. I would like to create a formula in Column B which will add 4 days to the date based upon Column A. However, the 4 days should only be added to a select set of dates which I would like to specify. If the date is not found in this select set of dates, then the result in Column B should be the same date as Column A.
View 3 Replies View RelatedI receive an extract from our Financial System monthly which list all the balances for each date of the month (both workings day and week-end(Sat. and Sun.)).
I would like to create a macro which will extract only working date (Mon.- Fri) and the balances in the columns.
In the attached workbook, I have subtotaled a list of parts. I want to add a formula beside the subtotals, under Column C, "Days BO", that subtracts earliest date in column R from the latest date in column R, for each part number.
I have added a simple formula to the attached example that does what I want, but the full sheet will be thousands of lines weekly, with varying part numbers, and different counts. I don't know how to take the count function into account so I can copy a single formula all the way down the sheet.
i have the year in cell A1 (Just The Year)
what i was looking for is a formula that will list all the days of the week..
IE if i pick Monday form a drop down list than it would like all the mondays for all twelve (12) Months
so Jan Column would say
5
12
19
26
31
and so on for each month than if i picked a different day it would do the same
Using Microsoft Excel 2003 On Windows Xp Home Edition
I have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI need to list the days of each month on separate spreadsheets...and need to to do this each year...
I was wondering if in cell A1 I type the first day of the month then is there a formula I can use to put the rest in without having to manually put them all in?
I have a fairly large watch collection as below which I wear on a daily rotating basis(!).
FORTIS
Seiko
OMEGA SPEEDMASTER
Seiko
SINN 144
Seiko
Accurist
Seiko
TEMPTION
Seiko
OMEGA TRIPLE DATE
Seiko
Junkers....................