I have a data table which looks like this:
1 2 3 4 a b c
5 6 7 8 d e f
And it should be converted to look like this:
1 2 3 4 a
1 2 3 4 b
1 2 3 4 c
5 6 7 8 d
5 6 7 8 e
5 6 7 8 f
So basically, the data in the last columns should be transposed, and the data in the first columns need to be copied in the cells of the new rows.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
I have a csv file that includes several runs of a test per day on 5 different parameters. I need to rearrange this data to show the results from each run on each date, but arranged in a different way. I've attached an .xlsx file that best describes what I have
View 8 Replies View RelatedI have table with duplicates values on the left side. Table has three columns and in each row is value only in one column. It looks like this:
EVI ROZ POA
101 22
101 3
110 6
110 2
110 3
112 12
114 8
114 6
...
I need to get rid of the duplicates in first column and save values for same number in first column in one row. Like this:
EVI ROZ POA
101 22 3
110 6 3 2
112 12
114 8 6
...
I think only macro can do this.
I want to rearranging the data in year wise for each company. My data (Sheet 1) is in this order.
Year Company A Company B
1996 Data 1 Data 1
.......
2006 Data 11 Data 2
I wan to rearrange the data (Sheet 2) in to the following order.
Company A 1996 Data 1
........
2006 Data 11
Company B 1996 Data 1
.........
2006 Data 11
Is there any possibility for vba for this soloution. If i will increase the no of companies, whether the vba will work or not.
I have attached a file for the same
I have about 20 columns headed things like Product Number, Size, Colour, Weight etc
So for example, one record might be something like:
Product number
Size
Colour
Weight
Col5
Col6
Col7
Col8
etc
[Code]....
I have about 10,000 of these records.
What I need is to rearrange them in another sheet which just has 3 columns.
Product number
Attributes
Values
A record would look something like
Product number
Attributes
Values
[Code]....
Is it possible to transform the first format in the first spread sheet to the second format in the second sheet?
I have a worksheet that contains data in the first three columns and then the 4th column is empty and then there's data in the next three columns and then an empty column etc. How can I cut the data from columns E to G and I to K and M to O etc....and paste it directly below the data in columns A to C? I dont know how many columns of data there are in the worksheet and every set of 3 columns of data (eg. E to G) varies in size. I recorded the following macro of what I want to do.
Sub rearrange()
Range("E1:G1").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Cut
Range("A95").Select
ActiveSheet.Paste
Range("I1:K1").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Cut
Range("A203").Select
ActiveSheet.Paste
Range("M1:O1").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Cut
Range("A386").Select
ActiveSheet.Paste
End Sub
unable to find anything besides splitting numbers and letters in a column into multiple columns.
The raw data at the moment looks like this:
ID Number
Ticket Number
Event
Sheet1 *A158662TIC-00013Food4flags512346TIC-00027flags8picnic9555510TIC-000311Food12picnic139707414TIC-000415Food16picnic17784218TIC-000519Everything
I would like to somehow change that into this:
Sheet1 *ABCDE15866TIC-0001Foodflags*21234TIC-0002*flagspicnic35555TIC-0003Food*picnic497074TIC-0004Foodpicnic*57842TIC-0005Foodflagspicnic
How do I rearrange a list of data in one column that are in sequence to appear at random i.e data should not follow any particular pattern.
View 4 Replies View RelatedIs there a simple way via VBA to alter the layout of data from a mixed up two column list into multiple headed lists on another worksheet (within the same workbook)?
The attachment should better demonstrate what I mean. Sheet1 has example data of how it is and Sheet2 shows how I would like it.
The data will be dynamic in the sense the numbers of unique values in column A will change (only increase, never decrease), as will the number of unique values in column B.
Is there any way to rearrange data in this way for the following:
: BEFORE:
/////////[Ticker A] [Ticker B] [Ticker C]
2010 ///// 0,3 ////// 0,6 /////// 0,9
2011 ///// 0,7 ////// 1,4 /////// 2,1
2012 ///// 1,3 ////// 2,6 /////// 3,9
: LATER :
2010 Ticker A 0,3
2011 Ticker A 0,6
2012 Ticker A 0,9
2010 Ticker B 0,7
2011 Ticker B 1,4
2012 Ticker B 2,1
2010 Ticker C 1,3
2011 Ticker C 2,6
2012 Ticker C 3,9
Worth function, worth macro, what worth everything that's automate this process. Are spreadsheets with hundreds of rows.
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
I have a list of names in the format "SURNAME, Firstname". By using left find and mid find formulas and then concatonating the result I can put the first name first and the surname after it in proper case. This works well for the most part (although if there is an easier way I'd be happy to hear it!) except for when it comes to people with double unhyphonated surnames - lets say for example Ella Van Hamburg.
The name would come through in the raw data as VAN HAMBURG, Ella When I separate the surname and change the case it says Van Hamburg But when I go to extract the first name I get the result HAMBURG, Ella And so when I concatonate: HAMBURG, Ella Van Hamburg. It works perfectly for everyone else, and with hyphonated surnames. I am then using this data in a VLOOKUP which means that the final result has to be in the leftmost column so at the moment that's just where I'm concatonating it.
I'm trying to work out if there is a way to rearrange the contents of a cell. Basically, I have names in each cell which have surname then first name and I want to have them reversed.
I know it would be easy if they were in seperate cells but unfortunately that's not the case. Is there a way to do it? If it's any help surnames are in upper case and first name in proper case.
I have posted earlier thread on similar problem but i did not get much response.I am really having a tough time to record a macro, where my columns will be selected with an interval and then will be pasted in to another sheet....
View 6 Replies View RelatedI imported a file of National Historic sights which imported fine with the exception that it's all out of order. Here is how it currently looks:
ResnameFIELDFIELDVALUE
Lake Norconian ClubApplicable CriterionARCHITECTURE/ENGINEERING
Lake Norconian ClubApplicable CriterionEVENT
Lake Norconian ClubArchitectGibbs, Dwight
Lake Norconian ClubArchitectWilson, G. Stanley
Lake Norconian ClubArchitectural StyleMISSION/SPANISH REVIVAL
Lake Norconian ClubArea of SignificanceARCHITECTURE
Lake Norconian ClubArea of SignificanceEXPLORATION/SETTLEMENT
Lake Norconian ClubCurrent FunctionDEFENSE
Lake Norconian ClubCurrent FunctionGOVERNMENT
Lake Norconian ClubCurrent SubfunctionCORRECTIONAL FACILITY
Lake Norconian ClubCurrent SubfunctionNAVAL FACILITY
Lake Norconian ClubFederal AgencyDEPARTMENT OF THE NAVY
Lake Norconian ClubHistoric FunctionCOMMERCE/TRADE
Lake Norconian ClubHistoric FunctionDOMESTIC..........................
how to link cells such as one cell with a date and an adjacent cell with data so that while I am rearranging the data in various ways the date that corresponds with the data stays with it as it moves around while I am sorting the data.
View 2 Replies View RelatedI have a large table of data which is currently just in alphebetical order. I also have a blank template of the exact table format on another sheet in the same document.
I am trying to create a macro which will pull everything into the current blank table but ranks each row by the overall score (%).
I'm trying to automatize the filling of 4 different tables regarding time (hours , minute)
In other words first i need to select from about 500 products names about 180 products i need. I solved this with an automatic filter like this
macro to automatically size an XY grid based on user input (see picture - [URL]......)
I want to enter a value in B6 that will automatically create a new grid or edit the existing grid to increase or decrease it depending on the desired grid size.Once the grid has been sized I want to enter a data table into it, therefore the grid would need to be cleared of contents before it could be resized.I think these are the steps that are needed:
- Enter grid size.
- Area (named range based on existing grid values?) is cleared of the data table.
- new rows / columns are inserted with correct XY coordinates shown based on newly entered grid size
- data table written into the new grid
I’m trying to do is create two tables from data evenly spaced throughout columns A to I. To make the screenshot easier to view I moved the second table under the first. The data is arranged so that each “Subject” has 42 columns and is arranged by “Type” and then by “Subject.”
The tricky part is that the number of subjects will vary so everything has to be done in some sort of loop. From the little I know about VBA I was able to record and edit a macro to add spaces every six rows and average the “MaxResponse.” (that’s what stage the screenshot was taken at) To make the table I think I need to write some sort of Dim statement but that is way beyond my comprehension.
Here is a link to a photo of the table http://yfrog.com/77excelshot3j
Excel 2003
VBA 6.5
Win XP Pro
I've got a bunch of pivot tables with nothing in their data fields and I want to add two things to the data fields of each, but I keep getting this error as soon as I start my loop:
Run-time error ‘1004’: Unable to get the PivotFields property of the PivotTable class
Here's the code that is highlighted when the error comes up:
ActiveSheet.PivotTables("Master_" & Count).AddDataField _
ActiveSheet.PivotTables("Master_" & Count).PivotFields( Sheets("raw data"). Cells(1 + Count, 2)), _
("Sum of " & Sheets("raw data").Cells(1 + Count, 2)), xlSum
I recorded doing the first one by hand and it looks like this:
ActiveSheet.PivotTables("Master_1").AddDataField ActiveSheet.PivotTables( _
"Master_1").PivotFields("10/2 Spread"), "Sum of 10/2 Spread", xlSum
I don't understand why I'm getting the error because I added watches and my variables are all saying what I want them to say (Master_1, 10/2 Spread)...
I've just exported a list from SharePoint to Excel, which gave me as a result a owssvr table, so far so good cause every time the list in SP is updated I can do a refresh and get the latest values; however once I opened the table I realized that the columns where not correctly order they were all mixed and the information does not look as it is required so I need to rearrange them. I do not need to delete a column I just need to be able to move them between themselves so that they will follow certain order: Product ID, Name, Amount of pieces, Place where they are stored, etc. this is very important because later on I use "vlookups" to do a series of reports.
I've tried cut- paste to move the columns to the correct position, unfortunately once I close the excel file and try to open it again, I got a message saying that the content is not readable and when Excel repairs it, my owssvr table loses the link to SP so I cannot update refresh the table anymore.
I cannot edit the list in SP as this site does not belong to me and I only got access to export the data and be able to refresh the table, all I want is to be able to move them within my ovssvr table so that locally I can work with them better.
Here is a pic of what I am talking about: cmms.JPG
So for example in the pic I put, I need that instead of Comments in Column E, Product ID can be in Column E, then Name in column F and so on..
Formula that can do this?
Sheet1
ABC111213214325436547658769871018112123113421453156416151726183194120522163227423852496257268279
Excel 2007
I basically want column A to be like Column C. The logic is that every time the row that have 1, skip a row and run the numbers until the next 1 appears.
This is the macro I am using
Sub Macro3()
'
' Macro3 Macro
'
Range("C2").Select
Selection.Copy
Sheets("Table").Select
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Range("A1").Select
[Code] .....
It does everything I want but take F2 info and send it over. But F3-F6 does go over.
Macro to extract data from cells and populate them into a table. Go to the links below for the images. Why I can't attach images here.
HTML Code: [URL]....
rearragning text on excel. I believe Macro will be needed to solve this problem so if anyone can help me out, it will be a big help. Thank you.
Example 1:
I need to rearrange
"trace Silt, cm SAND, some- f Gravel" into
"cm SAND, some- f Gravel, trace Silt"
Example 2:
I need to rearrange
"some+ Silt, f SAND, trace- f Gravel" into
"f SAND, some+ Silt, trace- f Gravel"
There are many different cases for this problem. So if there is a way for the computer to recognize the Capitalized word and move it to the front and rest should be arange in order listed below.
Order
and+
and
and-
some+
some
some-
little+
little
little-
trace+
trace
trace-
each term is seprarated by commas.
For example
f SAND, some+ Silt, trace- f Gravel
each color represent one complete sentence. and the order for them should be capitalized funciton first, then the follow the order provided above.
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
I'm having difficulty trying to get the second file appended to the bottom of the 1st imported file. I get "run-time error '13' type mismatch". There is no difference between the two files. I'm thinking there is a problem with my range statement in the second file import, but this range works fine in other macros. Here's my code so far:
Range("A1").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;\server1usersmydataIMPORT1.CSV", Destination _
:=Range("$A$1"))
.Name = "IMPORT1"
.FieldNames = True
.RowNumbers = False
[Code] .........