I have a table which is 8 columns wide by approximately 1000 (+) rows. I am struggling with the following;
if I type in seven numbers somewhere I need to get returns on a full 8 cell match? (and possible partial, but exact matches to 4+out of 8 numbers) All the numbers in individual cells are no larger than 99 and (in theory) are arranged from left to right in ascending order.
Can anyone point me in the right direction?
I don't want to use auto filter as I am just looking for a reference that I am searching the correct number. Does that make sense?
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
I am new to Excel macros and programming, and am running into a problem that I can't figure out how to solve. I have read through the forum and tried various examples, but I am still not getting the result I am looking for.
I have a spreadsheet that has a variable number of cells in-between blank rows (the data can be 1 to 6 rows). I need to sum up the rows of two columns and see if they equal 0 or if there is a difference. If there is a difference, I want to make the cell red. The exact problem I am having is I can't make it check the # of rows and run the formula based on that number of rows. I am attaching an example of my raw data followed by an example of what I am looking for as the end result.
I have 2 worksheets - main and match. In the main I have something like the following:.....
There are 200 entries in the main work sheet. In the match work sheet I have something like:......
I need to be able to flag if the entry in the match work sheet is already in the main worksheet by using the unique keyID. This flag will be in the match worksheet. I am using the following array formula: {=IF(A3='[main.xls]Main File'!$A$8:$A$16,"y","n")} and was hoping that this would give me a Y in my flag column but this only shows a N. If I just do a straight if statement then I get a yes: =IF(A2='[main.xls]Main File'!$A$29,"y","n")
Worksheet1!A2 holds a text value Worksheet1!B2 holds a text value
Worksheet2!D2 holds a text value Worksheet2!C2 holds a text value
Is it possible to use vlookup to find a match for Worksheet1!B2 in Worksheet2!C2 where the combination of Worksheet1!A2, Worksheet1!B2 is the same as the combination of Worksheet2!D2, Worksheet2!C2?
I am struggling with a macro that I’m trying to create. Basically what it would do is it would start at cell K1 on a sheet called “Database” and look for the value contained in cell K1 in the entire sheet.
It would paste all matches until no more are found into a sheet called “Matches”. Cell K1 would also be moved to this sheet if matches were found against it. It would then move on to the next non-empty cell in column K.
If no matches were found it would move on to the next non-empty cell.
I have a list of unique numbers on sheet 'List'. On another sheet, 'Data', I have a columns of data and column E contains a number which will match a number in the list on sheet 'List'.
What I want to do but don't know how to is loop (i think) through the numbers in 'List' and every row in 'Data' that contains a number is moved so that the data is grouped according to the number. i.e all rows with 78878 will appear beside each other and so on.
Neec code that i could use that will automate this so the user can just press a button and the data is reorganized?
How do I write a nested COUNTIF formula ( assigning a value of 1 for each cell) for a range of cells that does NOT contain "", "OFF", or "REQ OFF" ?
For example:
A row of 20 cells (A1:A20), 5 are blank (""), 3 contain the text "OFF", 4 contain the text "REQ OFF", and the rest contain anything other than the three values just mentioned.
I need a sum number for all the cells in that row that contain any other value. In this example, the output value should be 8. Out of 20 cells in the row, a total of 12 cells had either "", OFF, REQ OFF, and the remaining 8 had some other value that did not equal those.
Some sort of COUNTIF(AND(... Can't seem to figure this one out.
I have four columns of info. Two are check #s and amounts from the bank and two are check #s and amounts from a database. How can I delete check #s(along with their amounts) that match? Is there any way to detect check numbers that match but amounts that don't?
is it possible to provide a formula to match as per the uploaded file. Data in Sheet one columns A and B, compared to what is in Sheet two column A I have a lot of data, and only need a Y for yes, and N for No as a result.
I want to know if there is any formula to match two numbers which have same digits but are in different style. I have attached a spreadsheet with numbers in column A and Column B. Both columns have the same number just the style is different, is it possible that i get a match based on the digits match and then return the output as correct or wrong?
If all digits match from column A with column B it should show as correct else wrong.
We have a report with 2 different sheets. On sheet one there are 13,000 rows of data and columns A-H are filled with different data. column A is our item id and column G has a date that states when the item was sold last. Well, the date in column G is wrong for about 7800 rows and needs changed.
The second sheet in the file is the 7800 rows with just the item id in column A and the correct date in column B. We are looking for an easy way to replace the rows in the first sheet with the correct information from the rows in the second sheet without manually replacing it line by line.
I almost forgot to add in, that in both sheets, column A with the item ids are the same item ids on both those sheets. So column A on sheet one has 13000 rows and included in those 13000 are the 7800 item ids on sheet 2.
We tried using the VLookup function that is incorporated into excel but had absolutly no luck, mostly because we have never used this function before. Sheet one already has all the lines of sheet 2, its just that sheet one has the wrong dates for the item ids and sheet 2 has the correct dates. im trying to replace the dates on sheet one from the dates on sheet 2 matching on the item ids from both sheets......
I have a sheet containing a list of client name,the date they've been assigned, the type of account they have, the status of the account, and the last update date.
What I'm trying to accomplish is to extract the client name and the type of account on that table that shows as "complete" in status. However, it gets complicated since I need to separate the data that had been 'completed' under the same month, with those completed the other month.
For example, I have been assigned 2 clients this January. I closed one in the same month, and the other closed at February. The first client would be listed under the first table (Completed within the month) and the other would be on the second (Completed on previous months)
Since this would be monthly, I am thinking if it would be more efficient to include the table per sheet (as one sheet corresponds to a month), or consolidate everything to a single sheet... I'm not sure which one would be best.
i have a worksheet that is about 100rows x 100columns.
i would like to create some code to find a certain record. for example..
a1 a2 a3 a4 the record might be " tony tony alex tony"
basically, this group of cells could be any where in the group and i need some code to search the worksheet and then outline it. i just want to be able to find a certain block of cells and outline it.
I have 2 pretty large zip code lists, we will call them columns A and B. I know that I have some from A that match to zips in B, but I have alot more zips in B that don't match to column A. I need to identify all of the zips in B that do not match a zip in column A.
I have two columns with the same data just totally different orders the third column (associated with the second) has data that I want to sort. I want to keep the order of the first, rearange the second so they match, and have the 3rd column follow the second to the proper location. i need to keep the order of column 1 so i can post into a massive spreadsheet. Theres gotta be a quick formula for this i just have no clue
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
I have a column with 10,000+ lines, and lots of them are duplicated.
I have a formula that tells me how many times they are duplicated, but it only looks for 100% matching cells.
Now, lots of cells are partially duplicated, for example:
A1 - Team Abcde A2 - Team Abcde Fghi B1 - Team Abc
I would like to have a formula giving me a percentage of how two cells are similar to each others by checking the words. In this case, B1 is 50% similar to A1 because only the word 'Team' is duplicated. B1 is only 33,34% similar to A2.
How would I write a sumif function to only add consecutive cells that match the criteria? Here is the formula I am using right now, but it adds all of the cells that match the criteria, not just the consecutive ones. Also they need to be consecutive cells from the current cell (in the formula below i would be referring to A80)
=IF(A81<>A80,SUMIF(A$5:A80,A80,H$5:H80),"")
More data:
Column A is a group of dates, but not in order, they are slightly mixed up Column H is a monetary value.
I have a sheet with some survey data. the data covers about 4 months. There are about 2200 rows and 8 columns.
The "code" could be in there more than once as the person took the survey multipule times, but all other data is different. How can i pull out the whole row when the code is there more than once.
I want to know all the "codes" with multipule entries that took the survey more than once then trend there scores.
CentercodeRecommendReasonEnvironmentTraining ManagerOverall LHQTR27909415Learning effect4444LHQTR28844652 Center environment2222LHQTR45614375Service5555LHQTR96944292Service2222LHQTR144769543 Center environment4433LHQTR144769543Learning effect3433LHQTR155258791Service3213LHQTR168772563 Center environment2232LHQTR168772563Center environment3332LHQTR168772565 Learning effect4414LHQTR173991905Learning effect4445LHQTR192966385Service5555LHQTR193282534 Qualified teachers3344
I am trying to write a formula that will return a result based on which list a cell is found in.
Column A comprises of aisle/position information. The values range from B01 to B65, C01 to C65 ... H01 to H65 (Like aisles/shelf positions in a supermarket). This is not a static list, as the information in column A will change from week to week. It will be sorted prior to trying to work with it. The first three characters of the values in A will be what I'm comparing to the list. There is a fourth character that determines further details about the item that are not pertinent to this issue.
I need to match the value in column A to one of the four groups of values below and have the correct color display in column F. The correct color would be the name of the list that the value is found in.
Blue (K2:K61) contains the values B01 through B25 and C01 through C25.
Red (L2:L80) contains the values F01 to F21, G01 to G23 and H01 to H35.
Yellow (M2:M95) contains the values B36 to B65, C45 to C65 and D23 to D65.
Green (N2:N124) contains the values E36 to E65, F34 to F65, G34 to G65 and H37 to H65.
It probably boils down to a nested IF statement that checks to see if LEFT(A2,3) is found in any of the four lists, but I just can't wrap my head around how to write it.
How do you load an array with values from cells matching a criteria?
I want to look for the number 1 in row 5 and put the Adjacent values in Row 2 in an array. So here my array should have 1,3,6
Dim CountOne As Integer CountOne = Application.WorksheetFunction.CountIf(Worksheets("Tool Administration Form").Range("B8:AE8"), "1")
Dim All As Variant Dim rCell As Range Dim ArrCnt As Integer Dim lArrVar As Long ArrVar = 0
Do For Each rCell In Worksheets("Tool Administration Form").Range("B8:AE8") If rCell = 1 Then ArrCnt = ArrCnt + 1 All = Cells(-3, 0).Value End If Next rCell
Loop Until ArrCnt = CountOne I keep getting errors... I don' tknow how to fill the array properly wiht the values in the cells.
Example: A B C D E F G 1 2 1 2 3 4 5 6 7 3 4 5 1 2 1 3 3 2 1 4
