I have a list of unique numbers on sheet 'List'. On another sheet, 'Data', I have a columns of data and column E contains a number which will match a number in the list on sheet 'List'.
What I want to do but don't know how to is loop (i think) through the numbers in 'List' and every row in 'Data' that contains a number is moved so that the data is grouped according to the number. i.e all rows with 78878 will appear beside each other and so on.
Neec code that i could use that will automate this so the user can just press a button and the data is reorganized?
I have five columns of data: A & C are time measures; B & D are values associated with each time measure; and E is a matching value column that I want to populate. I am trying to match times and place in col E the Val 2 that matches times 1 and 2. Though many matches lie on the same row, there are many that don't (the real data uses several thousand rows). For example, Val 1 in cell A5 (100) is associated with cell C7 to find a matching value of 4.5 in cell E5. Note, occasionally, there will be replicate values for Val 2 (like cells C9 & C10). I need to match the one further down the list.
I am using Excel 2003. I have attached a data file here. getting the values in Q3, R3 and S3.
Scenario:
Q1 has the number = 1. So I want the cell Q3 to return 2/11/2013 as that is the cell corresponding to the Item1 (value specified in P3) with the value 1(value specified in Q1) in the cell. Basically, I need the date corresponding to cell which has the value of Q1 for the value of P3.
Similarly, R2 must have the value 2/12/2013 and S3 must have the value 2/14/2013 returned.
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003) Top 34%: =IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*100%)),MAX( $D$3:$D$38))
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
I am new to Excel macros and programming, and am running into a problem that I can't figure out how to solve. I have read through the forum and tried various examples, but I am still not getting the result I am looking for.
I have a spreadsheet that has a variable number of cells in-between blank rows (the data can be 1 to 6 rows). I need to sum up the rows of two columns and see if they equal 0 or if there is a difference. If there is a difference, I want to make the cell red. The exact problem I am having is I can't make it check the # of rows and run the formula based on that number of rows. I am attaching an example of my raw data followed by an example of what I am looking for as the end result.
I have 2 worksheets - main and match. In the main I have something like the following:.....
There are 200 entries in the main work sheet. In the match work sheet I have something like:......
I need to be able to flag if the entry in the match work sheet is already in the main worksheet by using the unique keyID. This flag will be in the match worksheet. I am using the following array formula: {=IF(A3='[main.xls]Main File'!$A$8:$A$16,"y","n")} and was hoping that this would give me a Y in my flag column but this only shows a N. If I just do a straight if statement then I get a yes: =IF(A2='[main.xls]Main File'!$A$29,"y","n")
I have a table which is 8 columns wide by approximately 1000 (+) rows. I am struggling with the following;
if I type in seven numbers somewhere I need to get returns on a full 8 cell match? (and possible partial, but exact matches to 4+out of 8 numbers) All the numbers in individual cells are no larger than 99 and (in theory) are arranged from left to right in ascending order.
Can anyone point me in the right direction?
I don't want to use auto filter as I am just looking for a reference that I am searching the correct number. Does that make sense?
Worksheet1!A2 holds a text value Worksheet1!B2 holds a text value
Worksheet2!D2 holds a text value Worksheet2!C2 holds a text value
Is it possible to use vlookup to find a match for Worksheet1!B2 in Worksheet2!C2 where the combination of Worksheet1!A2, Worksheet1!B2 is the same as the combination of Worksheet2!D2, Worksheet2!C2?
I am struggling with a macro that I’m trying to create. Basically what it would do is it would start at cell K1 on a sheet called “Database” and look for the value contained in cell K1 in the entire sheet.
It would paste all matches until no more are found into a sheet called “Matches”. Cell K1 would also be moved to this sheet if matches were found against it. It would then move on to the next non-empty cell in column K.
If no matches were found it would move on to the next non-empty cell.
How do I write a nested COUNTIF formula ( assigning a value of 1 for each cell) for a range of cells that does NOT contain "", "OFF", or "REQ OFF" ?
For example:
A row of 20 cells (A1:A20), 5 are blank (""), 3 contain the text "OFF", 4 contain the text "REQ OFF", and the rest contain anything other than the three values just mentioned.
I need a sum number for all the cells in that row that contain any other value. In this example, the output value should be 8. Out of 20 cells in the row, a total of 12 cells had either "", OFF, REQ OFF, and the remaining 8 had some other value that did not equal those.
Some sort of COUNTIF(AND(... Can't seem to figure this one out.
I have four columns of info. Two are check #s and amounts from the bank and two are check #s and amounts from a database. How can I delete check #s(along with their amounts) that match? Is there any way to detect check numbers that match but amounts that don't?
I cannot "BOLD" the contents of cells in my spreadsheet by clicking "B" on the menu bar. However I can do so by clicking on "Format - Cell - Font" and then using the selecting the Bold option. I wonder why this happens.
is it possible to provide a formula to match as per the uploaded file. Data in Sheet one columns A and B, compared to what is in Sheet two column A I have a lot of data, and only need a Y for yes, and N for No as a result.
I want to know if there is any formula to match two numbers which have same digits but are in different style. I have attached a spreadsheet with numbers in column A and Column B. Both columns have the same number just the style is different, is it possible that i get a match based on the digits match and then return the output as correct or wrong?
If all digits match from column A with column B it should show as correct else wrong.
We have a report with 2 different sheets. On sheet one there are 13,000 rows of data and columns A-H are filled with different data. column A is our item id and column G has a date that states when the item was sold last. Well, the date in column G is wrong for about 7800 rows and needs changed.
The second sheet in the file is the 7800 rows with just the item id in column A and the correct date in column B. We are looking for an easy way to replace the rows in the first sheet with the correct information from the rows in the second sheet without manually replacing it line by line.
I almost forgot to add in, that in both sheets, column A with the item ids are the same item ids on both those sheets. So column A on sheet one has 13000 rows and included in those 13000 are the 7800 item ids on sheet 2.
We tried using the VLookup function that is incorporated into excel but had absolutly no luck, mostly because we have never used this function before. Sheet one already has all the lines of sheet 2, its just that sheet one has the wrong dates for the item ids and sheet 2 has the correct dates. im trying to replace the dates on sheet one from the dates on sheet 2 matching on the item ids from both sheets......
I have a sheet containing a list of client name,the date they've been assigned, the type of account they have, the status of the account, and the last update date.
What I'm trying to accomplish is to extract the client name and the type of account on that table that shows as "complete" in status. However, it gets complicated since I need to separate the data that had been 'completed' under the same month, with those completed the other month.
For example, I have been assigned 2 clients this January. I closed one in the same month, and the other closed at February. The first client would be listed under the first table (Completed within the month) and the other would be on the second (Completed on previous months)
Since this would be monthly, I am thinking if it would be more efficient to include the table per sheet (as one sheet corresponds to a month), or consolidate everything to a single sheet... I'm not sure which one would be best.
i have a worksheet that is about 100rows x 100columns.
i would like to create some code to find a certain record. for example..
a1 a2 a3 a4 the record might be " tony tony alex tony"
basically, this group of cells could be any where in the group and i need some code to search the worksheet and then outline it. i just want to be able to find a certain block of cells and outline it.
I have 2 pretty large zip code lists, we will call them columns A and B. I know that I have some from A that match to zips in B, but I have alot more zips in B that don't match to column A. I need to identify all of the zips in B that do not match a zip in column A.
I have two columns with the same data just totally different orders the third column (associated with the second) has data that I want to sort. I want to keep the order of the first, rearange the second so they match, and have the 3rd column follow the second to the proper location. i need to keep the order of column 1 so i can post into a massive spreadsheet. Theres gotta be a quick formula for this i just have no clue
I am working in Excel 2003. I consider myself a little more experienced than a beginner, but not quite an intermediate. My problem is, I am doing percentage changes comparing the average year-to-date data of 2009 through 2012, and then I am attempting to get the percentage change of the current year-to-date data to the average of the aforementioned years.
I took an average of these numbers, that are pulled from other worksheets. The cells are set as "General".
112241 = 1.833333333 or rounded, 2 divided by 1 (the current year to date total), the result is -45%, which should be -50% decrease. The percent cell is set at percentage.
It appears the cells are not automatically rounding up.
I am using Microsoft Excel 2003. I put color in my cells to show contrast with the information in my data list. I used blue and white for my cell colors. When I used sort to put my information in alphabetical order it did not only rearrange the information, it also rearranged the colored cells. My orginal pattern (before using sort) was blue, white, blue, white, blue, white. After I used sort, the pattern was changed to white, white, blue, white, blue, blue. Is there any way I can use sort to arrange my information only in alphabetical order, using sort, without rearranging the color of the cells?
I have a work sheet with numerous cells coded one of two ways. Either a color of red or a color of green. Is there anyway to count how many times green cells show up? etc..?
I know I'd need to know the exact color but it would save a lot of time as I need to find out how many cells are of each color.
