I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click() unloadme End Sub Private Sub CommandButtonOK_Click() With Workbooks("RETS results version 2.xlsm")
I'm trying to set up a small database using excel ... utilising a userform to populate the database.
I have a userform set up with the following fields:
Bike Odometer Date Task1 Parts1 Cost1 Task2 Parts2 Cost2 Task3 Parts3 Cost3
What I would like the form to do is create rows based on the task, and generate rows of data as per the example below. For the 'activity' the bike, odometer and date are common, and a new row is created for each task.
In this example I have three tasks/parts/cost in the userform, but I plan on having around 20ish (xheck boxes, combo etc) ...
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I'm not sure how too set this up, here is a example of what I would like too do. This would make adding data too my list easy, I use Vlookup on my main form and it works great, had a lot of help on that from this site. I might be asking too much for this, if so tell me too go away.
I've created a userform that will pop up automatically when opening my workbook. My workbook will have many worksheets identified by the employee's last name, then first name (i.e. Doe, John) Etc. I ideally would like the name entry in my user form to locate the correct worksheet based on the sheet name and then all of the other data in the user form be put in the next available/appropriate row and column, etc. of that particular sheet. This user form would save me a ton of time keeping my training logs up to date, instead of having to locate each employee tab manually and then enter the data and then look for the next tab, etc.
At the end of the year I'll manually go to each worksheet and balance that year's training time and cost (as you'll see from the attached example), but I'm hoping that the user form entry will identify that "yearly balance row" as having data and would skip to the next row to begin the next year's training entry. The "Enter Data" Button would place all of the user form data (other than the name) into the appropriate row/column and I believe my refresh button will empty the user form fields, but I'm hoping it won't delete the data that was just previously entered into the worksheet. (See attachment)
see in atteched file User-form "frmEntry" work fine to update the data in Trader worksheet. but i need help to program.for the "frmExit" which i program. u can look in to the database "Trader Worksheet" .it enter the data in next available row.instead of up dating the corresponding existing stock ticker.to sell the stock.also when i enter the second sell of stock it change the row which is already their.not in new row.
The userform takes the data to a worksheet, then i run a pivot table on the worksheet to provide an easy to view summary of entries....
I'd like the user to be able to amend a record if they see an error ... so from the userform how do i do that ? I've read a bit about refedit ( completely ) and a bit about Find...
I have managed to put together a userform to input the data from a safety audit card to populate a spreadsheet so that i can generate stats etc (every ticked check box inputed a tick onto the spread sheet into the correct colum for the data, on resetting the form it went to the next line as per the userform database example available here). This was working fine as it only had 5 check boxes and although my code was probably a bit rough, it did the job. The code I was using is:...
I have the following code in a userform, assigned to a command button.
Private Sub CommandButton1_Click() Select Case TextBox2.Text Case Is = "" MsgBox "Please enter the Name of recipient." Case Else End Select
Select Case TextBox3.Text Case Is = "" MsgBox "Please enter the E-Mail Address of recipient." Case Else
I modified this code as it was starting at the bottom of the worksheet & checking for the 1st vacant row from the top. I wanted it to start at the top & look for the first vacant row down. That way, if there was a entry that was deleted, it would find that row 1st & keep the list in order. This code worked fine for the last 2 days, but, this morning, nothing is being entered on sheet2.range A2 or lower.
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
I have a userform with two pop up calendars (calendar1 and calendar2). Calendar1 is the "start date" and must be a Monday. I have this portion working fine. If they select a date other than a Monday an alert message will pop up notifying the user a Monday must be selected. I need to limit the user to a date selection in calendar2 to be a minimum of three years out from Calendar1. I would like an alert message to pop up in Calendar2 should the user select a date inside of my three year minimum. Am I even in the ballpark with the following:
If Trim(Calendar2.Value) < (Calendar1.Value + "not sure here") Then Calendar2.SetFocus MsgBox "Select End Date 3 Years Out From Start date", vbExclamation
I just need to make a user form for entering data in one of the sheets ( Pending Confirmed Orders ), requested user form should be used to enter the orders information in columns ( each column in new entry ) and just the rows ( from 6 - 21 ) with noting that row no 16 is to link external pdf file as you will see.
I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...
I am trying to get my User Form to work whereby I choose a pre-determined date entry. I have tried some coding but cannot get it to work. What code I need to add in VBA for this to work? I have tried to alter the time entry from my previous post that was solved but are doing something wrong.
I have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I have a list of account entries on sheet1 that go from 1/1/2014 to 2/05/2014. I want a userform that prompts for a cutoff date, where I will enter 1/31/2014, and it will then clear all entries AFTER the date that I enter into the userform.
I will be doing this on a monthly basis, and the number of rows will change each month.
I am trying to find out whether you can restrict the rest of the userform from being available, unless a certain field is entered.
I have a tax invoice userform, I want to restrict the user from entering any other data unless they have selected a customer.
There are other fields such as Customer Address, Customer Number, Disc% and Terms that populate through vlookup code once the customer is selected, so still need that to work once the customer is selected. I just don't want them to be able to enter any other data on the userform without the customer being selected.
I wasn't sure whether I needed to enter code into every other textbox or combo box that if cboCustomer = "" then pop up an error message, but that would require a lot of code to be entered. I have 30 comboboxes and 53 Textboxes that I want to restrict to not being available unless a customer is selected from combobox.
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
I'm learning 'on-the-job' to code VBA macros and about a week ago I asked a colleague to test (UK/Australian) date entry into a textbox on a userform. I wanted to ensure users can enter virtually any acceptable date format. About 10 minutes after sending the colleague the workbook, she advised that inputting 29 February and a year that is not a leap year had the effect of showing the textbox date in reverse and transferring that date to the workbook with the year indicated as "29" eg. 06-Feb-29.
Since then, I've spent a good deal of time seeking a correction to the code. I've tried scripts for 'If IsLeapYear' with the 'MonthLength = 29' etc, various other if statements and shuffling the original date order of my code. The unadulterated code is below. Does anyone have an answer (other than an Error Handler with a msgBox, informing the user that the date format is wrong)?
Private Sub txtMonth_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean) Dim dDate As Date dDate = DateSerial(Year(Calendar1), Month(Calendar1), Day(Calendar1)) dDate = txtMonth.Value txtMonth = Format(dDate, "dd-mmm-yy") On Error Goto EndMacro Exit Sub EndMacro: MsgBox "The date format you've entered is not a valid format!" txtMonth.SetFocus
I have workbook having around 25 sheets and i want macro to merge all sheets except first (summary) in to last sheet ( mergedata ) inpute data will be start from cell A17 in all sheet. also sheets may be add or delete as per requirement. after merge data from sheet name should add after each entry .
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
I'm trying to run a piece of code which checks the length of a cell entry and if it is over 100 characters long it deletes the value. The code is as follows:
Sub Macro1() If Len(Cells(1, 1)) > 100 Then Cells(2, 1).ClearContents End If End Sub
The string which is causing the error seems to be 255 or more characters long. Any ideas how to tackle the "Overflow" Error?
I have 4 columns, If column B (Ref No) is filled in, the adjacent columns, C,D and E become mandatory and an input box pops up on screen one after the other for entry into each column.
My problem is that I require a drop down list and not a input box for the final column (status). So i have created a userform with a combobox dropdown. I am having problems connecting the combobox selection to the final column, and for the selected combobox item to go into the right cell like the input box entry currently does.
Attachment 53209test743.xls
I have attached a sheet and also you can see the code below.
Code in Sheet
VB: Public SaveVal1 Public SaveVal2 Public SaveVal3
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I have a daily nutrition log that is made up of monthly sheets. New entries are placed below the last entry, into the proper sheet by date, automatically.
The problem I am having is to find a way to put my formulas and formats into row 1 of each new monthly sheet so that when the entry is for the next month, it will add the new entry into row 2 of the new month, seemlessly, without manual intervention.
The formula I am using works from row 2 and down. It doesn't work on row 1.
Here is one of formula's that works on row 2:
=If(Or($A2=$A1,$A2=""),"", SUMIF($A:$A,$A2,H:H))
When I copy/paste it into row1 (to get the starting reference row), I get this:
=If(Or($A1=#REF!,$A1=""),"",SUMIF($A:$A,$A1,H:H))
The code copies the last row (in the case of a new sheet that would be row 1) and pastes' it into the next row down and then overwrites the first five cells. The problem formulas are NOT in the first five cells.
I tried to using $A65536, but it also #REF! error's out.
