I have a column of repetitive data:
BLANK CELL
NAME
ADDRESS
CITY, STATE ZIP
BLANK CELL
I would like to be able to resort the dats so that each line becomes a column
BLANK CELL NAME ADDRESS CITY, STATE ZIP BLANK
CELL
I know I can do it 3 cells/rows at a time using the paste special and
transpose command but I have a 1000 names and addresses. How do I do it in
one operation instead of a thousand?
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example:
1. apple
2. apple
3. apple
4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
View 9 Replies View RelatedI'm not sure what I'm trying to do is even possible, but figured this is the place to ask the question. I'm trying to compare a list of companies (column a) to a list of employee email addresses (column b) and post results (column c) that display all associated email addresses that are unique to company name. Since multiple employee email addresses can be associated with numerous company names.
View 2 Replies View RelatedI wish to sort all of my rows depending on the value in only one of the columns. I do not know how to set this up, my data starts in row 7 and is in columns B:F, needs to be sorted by descending in column B.
View 1 Replies View RelatedI am trying to create a macro that sorts rows based on value of 2 columns, but every time that a value changes in either of them to leave an empty row between them. Is that possible? In simple words i want to separate my rows with the empty row while sorting them out alphabetically based on two columns.
Please check my screen shots. Test 1 is my spreadsheet before the macro. Test 2 is how i need it to be after the macro. The two columns that i want it sorted out is First GDS then Rate.
I have two columns one is web addresses and the other is email addresses but the rows do not line up. I was hoping that since the second half of the email address matches the web address I could somehow sort them so that the email address column and web address column match up. Here is an example but keep in mind that this list is about 9k long and this is just a sampling so you may not see any in this example that match. Also I may have more than one email address per website.
View 9 Replies View RelatedI want to highlight the names that are repeated over 3 x's in any group. Example is below.
http://tinyurl.com/6gu5v6
I am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
in data validation i have taken a list & assigned it to defined named range say industry ( 50 - 100 industries which are repetitive in nature)
now the problem is the data is neither sorted nor unique
but i want unique sorted data (i can not make changes in original data because of its other various linkages nested formulas)
Column A has donor name, column B has corresponding donation data for 2011. Column C has donor name, and column D has donation data for 2012. Column E has donor name, and column F has corresponding donation data for 2013.
Although Columns A and C and E all have donor names, there are many changes
from year to year with the addition and deletion of certain donors so the rows do not match up exactly. Is there a quick way to have the rows match up according to donor names in column each of the three columns? Secondarily, I need to sort by donation amount from highest to lowest (it can either be the total over the three years or based on any single year.
Currently my list looks like this:
2011 2012 2013
A A A
B C B
D D C
F E D
H F I
L G K
M H M
I would like it to look like this:
2011 2012 2013
A A A
B - B
C C -
- D-
- E-
F F F
G G G
H - -
L - L
- - M
Basically, I want to see the year over year giving for each donor. I've attached a sample for refrence. (I can't post the original due to confidentiality requirements.)
I'm trying to figure out a way ( excel 2000) how to sort data over a range of columns.
Attached is a sheet.
So what I am looking for is this:
Bottom 10 for target 1, target 2, target 3.
I can sort them indervidually, but is there a way to sort the all?
Or would I need a agent column for each target to sort?
Or maybe there is a way to sort the data so it would work out that if they are in the bottom 10 of lets say 2 of the targets but not all 3 they would still show in the bottom 10?
So I have several columns of data that have a location and then some numbers after it in additional columns. I need to be able to sort it so that all locations that are in both location columns are sorted first, and then any locations that are in one column but not the other column follows. Also the data associated with each column that follows the location needs to remain next to the location. Many times the columns will be of highly disportionate lengths too.
I've attached an HTML table so you can get an idea of what I am looking at, except what I'm dealing with is like.... hundreds of cells long.
I want to be able to turn this:
HTML Code:
<table border="1" bordercolor="#FFCC00" style="background-color:#FFFFCC" width="100%" cellpadding="3" cellspacing="3">
<tr>
<td>A</td>
[Code].....
And in this 6 row example, I'd actually only be interested in the 4 letters that were in both columns. If it makes it easier, I would be okay with discarding the last rows, but would rather just have them sorted at the end, so I could check if....for example there were two different spellings of the same thing, and they should actually be included.
i have a data entry tab where we put names and button to sort and hide blank rows from other tabs. Problem i want to move down the number entered also. something like extend sorting but not affecting the formula on the other columns.
View 2 Replies View RelatedI have 3 columns of data and 30,000+ rows. Column A & B are related and column C contains some of the same values as column B but not an exact match. I'm looking for a way to sort columns A & B so that columns B & C match up and the data from column A is moved as well. For any data that has no match, a blank space should be input. Please see below.
A B C
red dog cat
blue cat dog
green mouse pig
yellow horse kitten
A B C
blue cat cat
red dog dog
green mouse pig
yellow horse kitten
how to sort data pasted from word into specific columns e.g.
I paste: 1,2,3,4,8 into the ref row, and it poulates as such, leaving out the columns for which there is no corresponding value:
Competency: 1------2--------3-------4------5------6------7------8
Ref: -------WR1----WR1----WR1-----------WR5------------------WR1
We have an issue with sorting rows of data that have formulas in them.
---------------
These formulas are using data from a row which is above the column headers.
For example cell H2 has 160 manually entered in it. It's the number of work hours available in January 2009.
The column header for that column is in Q4 and has a value of 'Jan'
Below this in cell H5 is the formula '=+H2' because the resource in this row is available for 100% of the month.
Another resource in row 22 has the formula '=+H2*0.15' in cell H22 because they are only available 15% of the time that month.
---------------
The problem occurs when we try to sort this data. Most of the cells displays #REF!. Some show a value, but the calculation is wrong.
I am new to VB Macro creation and I am creating VB Macro which will:
1. Sort data in Columns within an active spreadsheet
2. Create new Worksheets
3. Delete Values in rows based on value in Column.
I have listed my "Step by Step" instructions in the tblTest Excel file on attachment. The instructions are clear and straight to the point.
Below are some VB Macros I was experimenting with but it is not complete.
Sub Sort_Ascending_With_Header()
'Sorts a worksheet in ascending order and assumes there are headers on the data
Range("A1:DZ20000").Sort _
[Code].....
I'm trying to merge 2 spreadsheets togeather but befor I can do this I need to resolve the following issue - my Excel worksheet has 2 columns with data that looks like this
Value1X1,X2,X5
I need it to change to this
Value1X1
Value1X2
Value1X5
I have three columns of data that I want to randomly sort by row. It's important that each of the three adjacent cells in each row move together, i.e.
Before assortment:
A1 B1 C1
A2 B2 C2
A3 B3 C3
After random assortment:
A2 B2 C2
A1 B1 C1
A3 B3 C3
I have a workbook (Sort Test.xlsx) where multiple rows belong to the same "group". Is there a way to sort by a value (e.g. name of the test, date of the test, etc.) while maintaining the formatting and keeping the "groups" together? There are 3 sheets in the work book. The first shows the sheet as is, the other two are examples of how I would like to be able to sort the data.
View 2 Replies View RelatedAny way to sort each row individually to move all data starting with letters "BML-" to first three columns? I have a document with data all over spreadsheet multiple rows and columns. But would like to move all cells that start with these characters "BML-" into first second and third column. I have been trying to accomplish it for over two weeks now without any success.
View 7 Replies View RelatedI have a big database, each row is having it's colour. How can I sort by colour? I mean, data with one colour comes first, then data with another colour comes after etc.
View 1 Replies View RelatedI have two header rows on a sheet that I need to sort starting on Row 3, Column A.
The sheet is A-K and rows 1 and 2 are headers
Row 1 has merged cells of A-F which says "Information" and then G-K " Tracking Section"
Row 2 is broken up into individual sub-headers in columns, A-K each one having a bit more info for instance:
Under the "Information" merged header in row 1 there is
A2 Name
B2 Work Center
C2 C/O date
D2 Due CC
E2 Due MX
F2 Date Received
and G-K in row 2 has different sub-headings.
I have tried to use my normal code, which is great for one header, but it ends up sorting the sub-header as I call it...
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
I have a workbook has a "Summary" worksheet. I would like to be able to do the following:
(1) Sort columns D, G, J, M,... (the number of columns are different each time I run the macro that I have).
(2) create a combo box to be able to the data (that sorted in 1) by month (1,2,..., 12).
see the attached file
I need to sort groups of data by a single cell in the group, compared to other single cells in other groups of data. The groups are always the same number of rows but vary in the number of rows. There is an example file below. The red is the company name and the green is what I need to sort the group by, as compared to the other groups. This example only has a few, the real file has thousands of groups. I want to sort the companies by the totals in green...they are currently in alphabetical order. There must be a way to do this without going the VBA option.
View 4 Replies View RelatedI have a report that I drop down into Excel that is a transaction report for securities. The data for each security is in two rows. I would like to write a macro that would sort each two-line group by a certain cell in the group. If I could make the macro request the number of rows and columns in each range and the cell address of the cell to sort by, I would be able to use this macro for many different reports. Also, there has to be some way of telling the macro where to begin and where to end. I have some experience with macros although generally I "Frankenstein".
I have company asset data listed by item on wksht 1. Example:
Company A Computer 200
Company C Coffee Machine 21
Company A Car A123
Company B Computer 70
Company A Chair B14
Company B Desk C56
Company C Computer 59
Company C Desk C789
I want to sort and covert the column data on wksht1 to row data on wksht2. Example:
Company A Computer 200, Car A123, Chair B14
Company B Computer 70, Desk C56
Company C Computer 59, Coffee Machine 21, Desk C789
I'd like to do this via VBA/Macro(s) if possible.
I have to do this every month, so it would be nice to append the existing data to an "archive" file on wksht3 and then create this months data.
The data is imported each month via a text file with comma delimited fields which become the column data in the top example.
Once again, I'm seeking some further assistance to an issue that I have yet to resolve.
I have several rows of data which I'd like to be able to sort by the info in column "A".
The data rows are not all consecutive. The range for which the data resides are:
Range("A25:A73,A85:A105,A145:A193"), When I sort I want my data to stay within these limits/ranges.