i have a range of cells ( address ) (d16:d21). what i need i16 to do is return the second from last row that has data in it so for example if data is
27 arcacia ave
hillybrook
hills
mountains
london
w4 3rd
it would return the answer london. however if the data was
27 arcacia ave
hillybrook
hills
mountains
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
Have a range of data with names dotted in different rows and cells.
I want to find a name, the return the number in the cell to the right.
Can use VLOOKUP as names arent always in same column of the range.
I have 12 named ranges on a sheet, ArrM1 thru ArrM12.
Each named range is same size, 6 Rows by 7 columns.
Q. If user selects a cell on sheet that is in one of these ranges, what is code to return name of range?
e.g. ArrM1 is cells c10:i15, user selects cell d12; I would like vba to return the name of the range "ArrM1".
Reason, I have the code below so if user selects cell in ArrM1 code is executed, but rather than reproduce code 12 times for each range I thought I could first see where user selects and then change variable for vrange,
Set vrange = wksYearlyCalendar.Range("ArrM1") to
Set vrange = wksYearlyCalendar.Range("ArrM" & x)
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim CalDaySel As String, CalDateSel As String
Dim vrange As Range
Dim cell As Range
Here is a sample of what I'm working with: ...
View 9 Replies View Relatedsee my attached picture. I am attempting to write a simple Excel Macro that can take the data from the red box and make it into the data in the blue box. Assume that I have a lot of data that will fill up the contents of the red box. I want to run the macro and have the macro output the data, NOW redistributed into the format that is contained in the blue box.
View 5 Replies View RelatedI want to create a button so when you press it, it will pick a random cell and display the info. Similar to the same sort of thing as a 'tip of the day' button you see on so many websites. I have a formula that kind of works from this site, but only when you make changes on a sheet or each time you load it up. I have tried to assign it to a button/picture but with no luck!
View 4 Replies View Relatedconstruct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
I am trying to put together a calculation sheet for court costs and I need a cell to return a value based on the amount entered in another cell. For example, if I input a value between 1 and 5 in cell A1, I would like "Cat" to appear in cell A2. However, if I input a value between 6 and 10 in cell A1, I would like "Dog" to appear in cell A2. Is this something that can be done without VB?
For the real spreadsheet, I would need the following outputs in cell A2 based on the respective ranges in cell A1:
Output to A2 = $405 if input to A1 is < $50,000.
Output to A2 = $905 if input to A1 is ≥ $50,000 and < $250,000
Output to A2 = $1,905 if input to A1 is ≥ $250,000
I want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.
View 2 Replies View Relatedwhen I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
I have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0
Next I
I have data inputted into cells a-o in rows 1-250. I want to search, lets say row 1, (I do want to search all 250 rows if that info is relevant!) and if cell m is blank then I want to return all the info from row 1 into row 260. If there IS data in cell m then I want to return nothing. Bottom line I want to return all the data in all the rows that contains nothing in cell m.
View 3 Replies View RelatedSo I'm trying to merge some of the information found within two separate worksheets. I'm working with a list of ID#s that may or may not be found on both worksheets, and in a column on Worksheet1 I want to put some of the information found for the corresponding ID# on Worksheet2.
Now I've figured out how to check if an ID# on Worksheet1 exists within a column in Worksheet2 using the formula:
IF(COUNTIF('WORKSHEET2'!$A:$A,A2)0,"MATCH","NO MATCH")
(Excuse the syntax errors if they exist, I'm doing this off the top of my head for expediency)
However, instead of returning the word "Match" if it does indeed exist on Worksheet2, I would like to return the value found in Column E, on the row of the matched ID#, in Worksheet2.
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I have a table that has a number of new starters and corresponding appointments offered, what I originally required was to lookup the chronological date after the new start date.
However this has now been scuppered by my boss who has requested that not only lookup the date, but also add who the appointment is with, but if I do this the first array formula stops working and to tell the trust I'm not to sure how to do it anyway.
I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):
_____A________B_________C____
1 ___0.0%_____50%_____$5.00
2 ___51%______75%_____$15.00
3 ___76%_____100% ____$25.00
Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).
I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.
Here is a sample of database,
A
1
Jan-12
2
Feb-12
3
Mar-12
4
Apr-12
5
May-12
6
Jun-12
7
Jul-12
8
Aug-12
9
Sep-12
10
Oct-12
11
Nov-12
12
Dec-12
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
I've posted this query before, not on this forum, but I don't think the replies I've had so far are going to do what I want. Initially I was looking for a formula, but the suggested pile of nested IFs won't work for the number of conditions. I saw a previous post on here for a VBA macro to search for a text value in a cell against the cell contents of a range and it seemed to do at least the first part of what I wanted. I attempted to manipulate it a little to test its applicability for my own nefarious purposes but for the life of me I can't get it working.
This is complicated by the fact that the actual data is commercially confidential, so I can't show you the actual file, but I can fake what I want with two simpler ones. I've attached them to this post. What I want is a fair bit more complex than the other post I found - I want to be able to compare a partial text string from a given cell in a range ('Check Value' in the attached TestBook2 ) against the strings in a range of cells ('Value 1' in TestBook1), and return the corresponding value from 'Test Value' to the corresponding adjacent cell to the tested 'Check Value', with an order of precedence, for example...
Testbook2 contains an entry in C5 of 'a, e, h, z, x, y'. Testbook1 shows that the return for a, b, c, or d is 'moo', for e, f, or g is 'steve' and for g through q is 'fred', all others being no returned value. Moo>steve>fred, so I want the corresponding 'moo, steve. fred or <blank>' cell to contain 'moo'. Conversely, C6 contains 't, u, z' and therefore shouldn't have a value in 'moo, steve, fred or <blank>'. C12 contains 'f, z, s, y, u' and C15 'i, x, z, s', and therefore should display 'steve' and 'fred' respectively.
The formula has to include a range across each row (for each student). The formula has to search for specific text contained in the classnames, and then return the result along the same row.
Below is an example, which I hope saves OK in the thread. If not I'll upload an Excel file:
A B C D Results:-
1 class1 class2 class3 class4 Gg Hi Fr Sp
2 10m/Gg1 10m/Hi2 10m/Fr1 10m/En1 TRUE TRUE TRUE FALSE
3 10n/Hi1 10n/En2 10n/Sp1 10n/Ma1 FALSE TRUE FALSE TRUE
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....
Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.
I would like to use a excel formula to resolve this problem.
Column C is the anwser I pretend.
In the same cell it will return the name of the correct range.
Ex: Between 200 and 300 there are numbers involved that are included in Range 1 and Range 2 (see second table)
Cell
A
B
C
1
From
To
Result: (How to return this value?)
2
200
300
Range1, Range2
3
301
400
N/A
4
401
500
N/A
Table to Check Value to Return:
Cell
A
B
C
1
120
280
Range 1
2
281
300
Range 2
3
600
650
Range 3
How to return address of the column or cell I selected from Application.Inputbox, not just return the value?
[Code] ....