Return Values Based On The Range In Another Cell
Nov 28, 2012
I am trying to put together a calculation sheet for court costs and I need a cell to return a value based on the amount entered in another cell. For example, if I input a value between 1 and 5 in cell A1, I would like "Cat" to appear in cell A2. However, if I input a value between 6 and 10 in cell A1, I would like "Dog" to appear in cell A2. Is this something that can be done without VB?
For the real spreadsheet, I would need the following outputs in cell A2 based on the respective ranges in cell A1:
Output to A2 = $405 if input to A1 is < $50,000.
Output to A2 = $905 if input to A1 is ≥ $50,000 and < $250,000
Output to A2 = $1,905 if input to A1 is ≥ $250,000
View 3 Replies
ADVERTISEMENT
Aug 5, 2014
I am trying to create a formula that will do the following:
If A1 is between 95 and 99 then populate with 2
If A1 is between 90 and 94 then populate with 3
If A1 is between 85 and 89 then populate with 4
If A1 is between 80 and 84 then populate with 5
If A1 is below 80 then populate with 6
View 11 Replies
View Related
Jan 22, 2008
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance.
The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
View 5 Replies
View Related
Oct 25, 2005
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
View 9 Replies
View Related
Nov 21, 2007
I have in A1 a string of 100 characters..
I would like to create a SELECT CASE where,
if in A1 there is the word "BLACK" , put 1 in A10
if in A1 there is the word "WHITE", put 2 in A10
else put 50 in A10
I'm trying to use the instruction INSTR but with negative results..
(I have many cases other than BLACK and WHITE, that's why I need a SELECT CASE)
View 4 Replies
View Related
Feb 20, 2008
I have the following formula: =IF(C319<=300,9,IF(AND(C319>300,C319<500,6.75),IF(C319>500,6))) It returns 9 if C319<=300 but returns FALSE for all other numbers. I want the funtion to return 9 If <=300 and 6.75 if C319 is greater than 300 but <=500 and if it greater than 500 it should return 6.
View 5 Replies
View Related
Sep 27, 2006
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
View 9 Replies
View Related
Dec 12, 2012
Here is a sample of database,
A
1
Jan-12
2
Feb-12
3
Mar-12
4
Apr-12
5
May-12
6
Jun-12
7
Jul-12
8
Aug-12
9
Sep-12
10
Oct-12
11
Nov-12
12
Dec-12
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
View 5 Replies
View Related
Apr 19, 2009
I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
View 4 Replies
View Related
Jul 2, 2012
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
View 7 Replies
View Related
Aug 31, 2012
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies
View Related
Feb 5, 2013
I've attached a workbook to explain my query further but essentially I have a data range, variable in size and I would like to split the range based on values in the range (delimiters if you like) into discreet ranges.
RanaldRangeSplit_01.xlsx
View 6 Replies
View Related
Jan 24, 2009
In my workbook sheet 11 has some ranges that need to have names based on cell values in sheet2 (for purposes of data validation lists).
Range S28:S46 will assume the name of sheet2A11 & sheet2A3.
(example name period_1unit_1)
Range U28:U46 will assume the name of sheet2A11 & sheet2A4.
Range W28:W46 will assume the name of sheet2A11 & sheet2A5
Right now I am calling the code when something is entered into A11.
I have tried if statement and select case, but I ran into complications with both.
I have posted both codes with the questions I have concerning those codes.
View 6 Replies
View Related
Feb 13, 2008
I have a range "RangeOne" and i want to check the range row by row.
In each row I want to check for value in second cell. If the value is 10 or more then the entire row in the range should be selected and then execute a macro. If the value is 0 to 10(but not 10 exactly) then the row in the range should be selected and then execute macro2.
View 3 Replies
View Related
Aug 2, 2012
I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
View 1 Replies
View Related
Aug 13, 2014
I've been trying to put together some code to hide a range of rows on one page based on cell values on a different page. So basically Sheet1 cell A1 value is 10, A2 value is 20. When macro is run via button rows on Sheet2 from 10-20 would be hidden. The issue is the values in the cells on Sheet1 will vary. I thought something like the following would work but it doesn't.
[Code] ....
View 6 Replies
View Related
Jun 6, 2012
I have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.
The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:
a) the cell is > the x1 cell above it
OR b) the cell is < the x2 cell above it
If it is = or between the two cells, the value stays.
Example:
If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc
Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.
View 3 Replies
View Related
Jul 30, 2014
I have a range of cells where each row relates to an employee.
In Cells (Columns H:L) I want the range of cells on that row to turn blue if the user puts a "H" in one of the cells.
Also it will need to be adapted for "O" , "Y", "X" - each with different colours.
This needs to be repeated on each row for each person.
View 5 Replies
View Related
Feb 20, 2007
I searched and found that to assign a name to a label based on a cell value requires the following
Label1.Caption = Worksheets("Sheet1").Range("A1").Value
which would assign the value in cell A1 as the caption for Label1. I've got a range of values in cells:
C4:N4
and I'd like to assign them as names to labels 1 through 12. How would I do that using VBA?
View 6 Replies
View Related
Mar 25, 2009
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
View 9 Replies
View Related
Jan 23, 2013
I have recorded a macro to sort a range of cell based on two values that is dependent on time in another cell. I now want the macro to run automatically when refreshing the workbook with F9, so as the time changes so will the sorting. Everything works fine except the sorting doesn't refresh when F9 is refreshed.
My recorded macro is:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim X As Long, FillCT As Long
For X = 1 To 4
If Cells(Rows.count, 1).End(xlUp).Offset(0, X - 1) <> "" Then FillCT = FillCT + 1
[Code] .....
View 4 Replies
View Related
Mar 31, 2014
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
View 7 Replies
View Related
Oct 24, 2013
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
View 5 Replies
View Related
Oct 2, 2011
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
View 9 Replies
View Related
Mar 17, 2014
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
View 3 Replies
View Related
Jan 31, 2014
I have been creating a schedule on excel, the schedule includes a top row which has the following headings Date, Agent_ID, title, agent_name, 07:00, 07:15, 07:30, etc up until 21:45
The columns that are named with times are times that indicate a break time.
The column named title is the actual shift time, eg 08:00 - 17:00.
I need a formula that would look at my source data, and populate a sheet in the following layout
agent_id, agent_name, title, start_time, end_time
The title be one of the following:
Shift 08:00 - 17:00
Tea Break 10:00 - 10:15
Lunch Break 12:00 - 12:30
Tea Break 14:15 - 14:30
If I need to have the shift portion and the break portion appear on separate tabs that would also be ok, but ultimately I need to keep my original source as is, but the change it to be able to upload it into a MySQL database.
View 2 Replies
View Related
Jun 3, 2014
I have created a drop down list of various material sizes what I am needing to do is to select a material size from the drop down list and a corresponding value is input into the cell. So on say sheet two (Data Sheet) I have Cell A1 25x25 with Cell B1 100, Cell A2 30x30 with Cell B2 120 and so on. On sheet 1 Cell A1 has my drop down list being the material size ie 25x25, so what I need to happen is if I select 25x25 then Cell B1 is 100 or if I select 30x30 then cell B1 is 120.
View 4 Replies
View Related
Aug 11, 2013
I'm trying to return 2 values from a table selection, based on a value i.e. if I look up the table for "Team 1" - i'd like to return Team 1 v Team 6, Team 9 v Team 1, and so on, to a Fixtures Section in a different area of my Excel Sheet.
However, the look up value "Team 1" could be in column J or N. I've tried Index, Match, VLookup, IF statements etc....
See below:
J
K
L
M
N
[Code].....
View 1 Replies
View Related
Aug 22, 2013
how to return values based on some conditions.
So for the sake of this example i have two cells lets call them J1 & J2 , one with the client name and another with State (matches the table name)
How can i get it so when i type in say Client 1 & Table 3 it will return the information in client 1s column into table 1s rate column. Obviously i want to be able to type in any clients name / table and have the same thing happen.
the red is what i want returned into table 1s rate column
Table 1
Table 1
Table 2
Table 2
[Code].....
View 1 Replies
View Related
Feb 4, 2008
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
View 9 Replies
View Related
