=if(MATCH(A2,cw!$G$1:$G$40000),1,"#")
i'm trying to see if value in column is found in a different column.
I've tried the above formula as well as this one
=IF(VLOOKUP(A3,cw!$G$2:$G$40000,1,0),1,"#")
I need to remove values from column A that are present in column C without modifying the order in column B. To be more explicit below is an example:
Column A---------Column B-------Column C
5230400----------81,50----------1660000
3275500----------78,00----------6245700
2856300----------47,50----------5230400
1879800----------62,50----------2497900
2124300----------99,00----------1879800
2497900----------65,00
4826900----------77,50
2124200----------34,00
6245700----------61,50
3324400----------86,00
1660000----------53,00
Column A represents 600 materials.
Column B represents 600 prices. (different for each material)
Column C represents 107 materials that are present in column A and have to be removed along with their prices in column B.
Now i want to remove the materials that are in column A and C along with their prices, so i won't damage the order in the file.Meaning if i delete a row in A and shift the other materials up or down, and in the same time column B remains unchanged, the remaining materials will have different prices...and that's not good.
i want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
This code inserts a new column to the left of Column CV ...
View 6 Replies View RelatedI am trying to perform a simple insert macro. That will search column A for a value "Jack".
Once the value has been found insert a blank row, 2 rows up from that value. Not below.
I would like a macro to order the columns as per the hardcoded list. If the column is not found than add the column at the position as per the hardcoded list. Below macro does the first part of re-ordering however if the column is not found how do I add an empty column:
Sub Reorder_Columns()
Dim ColOrder As Variant, i As Integer, Found As Range
ColOrder = Array("LogicalFileName", "LogicalFilePath", "UploadedDate", "UploadedBy",
[Code].....
What formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)
I’m working in Excel ’03 with a large table. I’m hoping to run a macro against a cell with value ‘X’ whenever that value is found within a particular column. I’d like this to be relative and not tied to a particular column so I can tweak it as needed down the road and run it against different columns.
In the example below, lets say I’m working with column B. I’d like something that would go through every cell in the column and run a macro when it comes across a particular value. Let’s say this value is x.
__A B C D E F
1 a x a a a x
2 b a b b b a
3 c x c c c c
4 f f f x f f
5 s s s a s s
6 g x g g g x
7 a a a a a a
8 s s s s s s
So, in my example, the macro would be run on B1, B3, and B6. And, if I wanted to go back in later, I could run this on column D and the macro would run on cell D4.
I have a set of data (time in minutes) below (fig 1) that I need to use if the total time between two entered times matches a coloms total. If it matches I want Excel to use the data in that colom to affect the data in another (fig 2) colom adding the times to each cell.
Looking at both figs. below I want Row B, Colom A in fig 2 to add Row A, Col A to Row A, Col A in fig 1 since both are the total of 19.
fig 1
Coloms A B C D
Row A 5 5 6 6
Row B 5 6 6 8
Row C 4 5 6 7
Row D 5 4 4 5
Total 19 20 23 26
fig 2
Coloms A B C D
Row A 1:00 2:00 3:11 4:01
Row B
Row C
Row E
Row F 1:19 2:20 3:33 4:27
Row F-A= 19 20 23 26
i'm having trouble with some of the codes...
i'm suppose to create a code that searches a specific phrase/word in a row, then from that row, i want to mark the entire column, so that i can copy it and paste it in a new sheet
eg. find 'NE_KENNUNG', once it's found, mark the whole column "C"(the column may vary), copy the whole column, paste on to a new sheet
here's what i've written so far..
-------------------------------------------------------------
Private Sub CommandButton1_Click()
Search ("NE_KENNUNG")
End Sub
Sub Search(strSrch As String)
Dim xFind
MsgBox "in Suchfunktion !"
If strSrch = "" Then Exit Sub
I need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
View 7 Replies View RelatedI have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
Is there a macro that will begin in cell A2 and delete rows until the contents “Total” is found in a random row in Column A?
View 4 Replies View RelatedWhat I would like to do is if a string e.g. "*12/18/09*" is found in column A, then place "1" in column B. There are many rows that I would like to search. Either a formula or VBA would be fine.
View 6 Replies View RelatedI have sheet 1 and in
c3
d3
1st
copy
1347
0934
[Code] .......
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
I need a VBA script that can display a search box on multiple sheets within the same workbook similar to using ctrl + F and search values in column B only. If there is text or the row happens to be empty then it should skip that and only search numbers. Also the numbers in column B range from 50000 to 89000 and if there is a wrong number entered then I want to have a pop up box saying Error: invalid value or something like that.
Sub search_box()
Range("B49000").Select
Cells.Find(What:="some#", After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Cells.FindNext(After:=ActiveCell).Activate
End Sub
I would like to use the following code to see if the word "reservoir" shows up in any of the rows in a certain column. If it does I want to insert the formula = SUM(D7:D257)*0.1 into cell C2 and if it doesn't then I want to put a 0 into cell C2. I've tried many routes but can't get past the error if it can't find the word.
Range("B7:B257").Find(What:="Reservoir").Activate
I'm writing some code where I need to know the column in which a specifc text string occurs. Because of the nature of the sheet, the string will only appear in one column, but that could be in almost any column on the worksheet.
For example say the text string is "Year 1", I need to find the column with this string, and then offset down to a predetermined row, or offset over to the appropriate column (something like below).
With Selection
.Offset(0, x).Select
If List.Selected(0) = True Then
y = i - 1
With Selection
.Value = Salary * Inflation1 ^ y
End With
Else
I am looking for a formula to return the column number of the array when a specific text is found, in this case the text is "Yes"
The Array will only ever be 5 cells beside each other in a row
for example, M4:Q4, will be as follows - No No No Yes No
I want a formula to look at these 5 cells and return the number 4 as that is where the "Yes" value is
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
Looking to find 1 of 2 words in a cell in column B and return the word found in the same row in column E. This seemed easy but I am not having any luck.
the cells in column B have several words in them but I am looking for 2 specific words "PLAT" and "ORIG". If the word is not in the cell, it should show a blank cell in column E in the same row, otherwise one of the 2 words should be in that row in column E. A VBA loop would be ideal but a formula that can do it might work as well.
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code:
Private Sub TextBox1_Change()
Dim test1 As String
Dim FoundRom As Range
Dim i as String
Dim abc1 As Range
Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
I'm using a formula to lookup names within text and return that name to a separate column if it's found.
The formula is =INDEX($E$1024:$E$1026,MATCH(FALSE,ISERROR(FIND($E$1024:$E$1026,E1010)),0))
I understand index and match functions, but I'm confused regarding the use of FALSE as the lookup value and the iserror(find( usage.
I'm trying to conditionally format rows of data based on duplicates in the first column, then filter the results. I have a table of data with mutiple variables assigned to different "headings" that looks a little something like this:
A
B
C
D
[Code]....
[selects the table, then GoTo Special selects the blanks, fills in the blanks with the cell above, then Copy and Pastes As Values the entire table again to fill everything in]
I’m stuck on how to input a formula into the conditional formatting window that will:
Format the text to white in columns A, B, and E based on there being a duplicate above that row in Column A only. i.e. conditionally format the values with a * below:
A
B
C
D
E
[Code]....
If I use the conditional formula I found: =A1=A2, then cell E3 gets made white text when I don’t want it to, hence the “referencing column A” part of the question (Column A is always a unique ID number whereas Column E can have a duplicate in the row above). [Edit: Why can't I type Enter or put a line break here... I'll try re-edit at home...] When I go to filter on Column C for YYY again, the conditional formatting needs to realise to un-white the text, which is my next headache because it means conditional formatting that acts relative to hidden rows as a result of a filter... Oh and did I mention the client wants this done in 2003? This is an afterthought though – as I can force them to use 2010 if need be
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
I have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
I am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X”
Cells.Select
Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros
I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it