I have a list that i copies from the web which was pasted in this format in 1 cell
(214) 880-4000lee_ainslie@maverickcap.com
i wanted to seperate the email into its own cell, how can i write a macro that will take anything from the right of the last number and move it into its own cell?
I am looking for a formula to count the number of valid mobile phone numbers in a list and the number of valid email address in another list, 2 different formulas.
The mobile phone number formula would count the number of indervidual mobile phone numbers in a list that contain 077 and 078 and 079.
The email formula would count the number of indervidual email addresses in a list that contain ...........@..........dot com or .............@............dot co dot uk
Both lists may contain random junk text, like in the email list some one may have entered words like 'no email address' etc.
I'm looking to see is if there is a way to modify this code to format a phone number as (999) 999-9999. Right now it formats phone numbers as 999-999-9999.
VB:
Sub FormatPhoneNumber()
'Purpose: Formats a telephone number as 999-999-9999.
'In cases where more than one phone number is enter in
[Code].....
I often have lists of badly formated phone numbers. I have created a number of macros that are quite good, but there is room for improvement.
Step 1:
Delete non numeric characters. This is a weak point - at the moment it is not working well (it removes characters from the entire sheet, rather than selected cells)
I have a cell that NEEDS to be of the following format:
#### ######
I have set this up under formatting, custom... and when I type a number like this ...
01304999999 I get the result 01304 999999 PERFECT!
Unfortunately if I type this....
01304 999 999 I get this result 01304 999 999 which ain't good as it mucks up my Macro, whih incidentally is this...
appWD.ActiveDocument.Bookmarks("PMTelephone").Range = Format(strPMTelephone, "0#### ######")
I am building a contact database in excel. I am using a userform to search, by autofilter, through several thousand contacts by any one of 7 criteria(account name, postal code,, account number, etc.). The only criteria that I cannot get to work is the phone number.
The numbers are entered in a ten digit string and the cells are formatted as phone numbers. i.e: 8005551212 = (800) 555-1212. When I run the search by the 10 digit number, the autofilter hides all results.
I have a list of telephone numbers... in every format you can imagine
123.456.7892
(123) 456 - 7892
1234567892
123-456-7892
etc...
is there any way to extract JUST the numbers...
so the format all phone numbers would take would be:
1234567892
?
I'd like to dial phone numbers directly from a specific column on a worksheet just by doubleclicking on them.
I found this code which I am trying to adapt to my use.
The hardware part is setup already (modem, phone line, etc.)
Private Sub Dial(Number)
Dim DialString As String
Dim FromModem As String
Dim dummy As Integer
' AT is the Hayes compatible ATTENTION command and is required to send commands to the modem.
' DT means "Dial Tone." The Dial command uses touch tones, as opposed to pulse (DP = Dial Pulse).
' Numbers is the phone number being dialed.
' A semicolon tells the modem to return to command mode after dialing (important).
' A carriage return, vbCr, is required when sending commands to the modem.
DialString = "ATDT" + Number + ";" + vbCr
I am getting an error message when I doubleclick that says :Runtime Error 424 , Object
Required and then I'm taken to the code line that is in Bold Yellow. Dealing with Comm
Ports is too much for me. I only know that my modem is in Com Port 4. If I'm told what to
I have an old customer list maintained by my company's previous owner in excel format that mostly stored numbers ###-#### format, but also some in ###-###-#### format.
My new list has always been maintained with numbers in (###) ###-#### format.
I have merged these two lists in a new excel file have begun the tedious process of cleaning up duplicates and bad data.
I have used conditional formatting to highlight duplicate numbers in the appropriate columns (L, M, N, O) in this case. However, it does't find matches in the other formats or perhaps the number with the old area code. I know the area code change could lead to false positives, but they should be minimal as this is a small business with mostly local customers. So what I'd like to find out is a formula for conditional formatting that will compare the last 8 characters in each cell (###-####) so as to eliminate issues of missing or different area codes. I would like it to check all of the columns for duplicate numbers not just within each column or within each row individually.
Also separate but related if possible to highlight a different color any cells with data not in any of these formats or if not in (###) ###-#### format if it's too much for all the formats.
I need to reformat phone numbers in Excel, and I am having trouble doing so. I do not have VBA experience, but I am somewhat familiar with functions in Excel. I need to go from 555-555-5555 to (555) 555-5555
View 4 Replies View RelatedI am looking for a custom number format for phone numbers that will allow extensions to be typed in. I am trued using the standard phone format [
View 12 Replies View RelatedI have the following text, in which I need separated into three columns.
Column A) Company Name
Column B) Address
Column C) Phone Number
I was thinking perhaps I could replace "-------" to just one "-" and use that delimiter to separate the phone number.
Then Use *** Company Name Here *** --> *Number Variable* and filter the rest..
But I don't see it being able to work.Here is the text I'm looking to format (Mind you there is about 8,000 Records.
And, it's all formatted like below. (Company Name, phone number being on different lines and phone number being separated by dash's
[Code].....
I have our company telephone accounts and im trying to highlight any numbers that are not on our approved dialling list. What I would like to happen (ideally) would be for a formula to look at the cell next to it and compare it with the approved numbers list, if it doesn’t appear on the list then it would do something to let me know, like put a big red X in the cell (if it could make me a cup of Tea instead that would be better).
View 9 Replies View RelatedIs there a way to extract a phone number out of a string of text. The phone number will always be expressed the same way (eight digits seperated by a space half way through) - 9999 9999. But the text before and after the number is random. Is there a macro to do this on a large scale? The method needs to be applied to hundreds of these strings, each on a new line.
An example of the string of text with the phone number underlined:
Alesdro 0 63PnantCey4281 5919 Aledio daSisaon' Brglry
I have a very long list of international phone numbers in a .csv format that I need to put a zero in front of each one. We are doing an international autodialer campaign for an upcoming event and need the zeros at the beginning to pay for the call. How do you get around Excel not allowing a zero at the front of a number and the .csv format not allowing you to save certain formats? I've been searching the archived posts for a hour now and can't find anything on this!
Here is an example
1.14478E+13
1.1448E+13
1.14417E+13
1.14421E+13
1.14421E+13
1.1448E+13
How do I seperate 1.2 and 1.02 miutes from the same column into Minutes and Seconds Correctly.
How do I get the first to seperate as (1) Min (20) Secs and the next to
seperate to (1) Min (2) Secs
I have 200,000 line of data in one column with times from .o1 mins to 1498.40 mins that I am doing this to. I need to convert it all back to seconds.
We have a spreadsheet of our customer's info, to send to our collection agency; when we export it puts parenthesis around the area code and adds a hyphen in the number.
Also it puts commas in the figures. And I need the slashes gone from the date - is there a simple way to do this?
I tried formatting but it doesn't take out the () or ,
I am trying to format a cell (in Excel 2010) as a phone number. The problemis that the data comes over from our download as text. Is there an easier way then using the 'SUBSTITUTE' function to change format to a true phone number (so that we can mail merge into WORD)? Since it is extracted out as a text, using the 'phone number' format (under special) will not work. Using the 'SUBSTITUTE' formula to remove the parenthesis', the dash and the space work but is cumbersome.
Below is an example of the text format that is being extracted: (706) 378-7585
I have a series of dependent drop lists and a cell which asks for a phone number. I would like if the selection in the previous cell is North America, the format of (111) 111-1111 is chosen. if the user enters the improper format I would like them to be prompt with an error "Improper Format - <Proper Format>", clear contents, and re-select the cell otherwise if valid select the next cell. It would need to strip out the leading 1 incase an international code is entered and also special characters such as "(",")","-","+","_" as well as spaces.
The next problem is that it would have to change format to if another selection is chosen. The other two selections are Australia and Europe. Europe is more difficult of a format as the area codes vary in length. I will be dealing predominantly with Sweden whose area codes even vary. For Australia I would like it to be in the format 011 61 1 1111 1111 where 011 61 will be added even if the user does not enter it (or if not possible prompt with proper format).
The cell asking which continent is G35 and options are "","Australia", "Europe", "North America"
The cell asking for a phone number is K47
The next cell on valid response is G50
I have phone number in phone format which looks like this: (123) 456-7890 which needs to be converted to: 1234567890.
I tried but unable to do so.
Attached file where i m not able to split data in seperate seperate coloumn
View 3 Replies View RelatedI have a 2010 version of MS Excel. I have roughly 10000 cells that I need to separate into two columns from one cell.
Here is an example of one cell "John Smith 888-8888".
I would like to create a formula that would break a number into seperate currencies as follows:
Any amount that is >0 would be flagged as "gp"
Any amount that is .1 would be flagged as "sp"
Any amount that is
I know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
View 4 Replies View RelatedI have a cell containing body of an email.How can i check for 15 or 16 digit number in the text and extract it. Basically i am checking for a credit card number in the email and if it is there then i need to extract it to adjacent colum.
View 4 Replies View RelatedI have a spreadsheet that in column A has someones name, in Column B it has a number.
For example
Column A Column B
Bob Smith 1999
I am looking for a macro that will automatically send an email to this address for example test@test.com, when the number in column B reaches 1200.
I need the email to have in the body - "Bob Smith has reached 1200"
I need this macro to run against 20 sheets in my workbook.
it is possible to set up a macro that can route a file to specific people based on conditions in the file? what i am trying to do is route via email a excell file on dollar amount. So if file is for $10,000 ; send it to 2 specific people. If its for $90,000 send to specific 4 people.
View 4 Replies View RelatedI would like to search an outlook folder for a variable in the subject line and return the date when that email was received. Here is the code i have so far...
Code:
Sub Get_pos()
Set olApp = CreateObject("Outlook.Application")
Dim olNs As Outlook.Namespace
Dim Fldr As Outlook.MAPIFolder
Dim olMail As Variant
Set olApp = New Outlook.Application
[Code] ........
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
[Code] .....
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code:
If Range("B" & a) = "Y" Then
If citChev "" Then .Attachments.Add citChev
End If
If Range("C" & a) = "Y" Then
If citMits "" Then .Attachments.Add citMits
End If
If Range("D" & a) = "Y" Then
If citToyo "" Then .Attachments.Add citToyo
End If
If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.