A00956
ABT
DUK
CASH-1
The above column is in a spreadsheet I am working on. I would like to write a formula that looks at this column and returns all of the cells that are not blank (ie: A00956, ABT, DUK and CASH-1) I don't know how to have the formula skip the blank cells (the cells are blank but not empty).
How you can find the min with simpler ranges, but my equation doesn't work with what I've found so far. I want to skip the zeroes and blanks.
=IF(AC44>0,(MIN((FS13+FL13),(FS18+FL18),(FS23+FL23),(FS28+FL28),(FS$417+FL$417),
(FS$422+FL$422),(FS$427+FL$427),(FS$432+FL$432))) ,)
i have table in the left side and i want to get the results in the table in the right side skipping blanks row price with taking in consideration blanks are formula contain ""
[IMG][/IMG]
I tried sending this message once before but the system crapped out. At least on my end. If it was sent and this is a partial duplicate. At any rate, as most of you know when an Excel workbook has a large number of merged fields Excel sometimes changes all the cell (not just the merged cells) formats to a Date type, with the exception of those cells that are the Text data type. I found the following code on the net someplace and I can't properly cite the author, that when run resets the cell formats to the default format which is General for all those that had been changed.
Sub CleanStyles()
Dim sty As Style, wbTemp As Workbook
' First, remove all styles other than Excel's own.
' they may have arrived from pasting from other workbooks
[Code]....
This code worked for months. However, it no longer works. I opened the code in the VBA editor and stepped through it using F8. The first time I pressed F8 the first line in the code is highlighted, just like always. The next time I pressed F8 the third line of code (not counting the remarks or blank lines) is highlighted. It did not highlight the Dim statement.
I'm using Excel 2007 in XP.
I have this calendar with a total of 31 staff assigned. I need to assign two staff to cover each day not grayed out utilizing the staff tab from the top (A1) to the last (A31). Need to go to next name if blank.
Example:
Bob
Bill
James
Kathy
Should show
Bob
Bill
then
James
Kathy
not
Bob
Space
Bill
James
I'm looking for a formula for return a result only when one other criteria is met. I've looked at SUMPRODUCT and VLOOKUP as options but haven't been able to make them work. Here is what I need:
I want cell E33 to look up cell B33 in 'Test Result Table' and return the 12th column of information, but only when cell C33 and 3rd column in 'Test Result Table' match. If the first result isn't a match I want the lookup to skip it and return the first available match.
I don't want to add anything, I just need a match returned based on C33 and the 3rd column being equal (cell C33 is a VLOOKUP of the 3rd column in 'Test Result Table').
I am trying to create a weighted average which will skip any row when Column B say's "yes" and then if Column N contains, a 0, I would like that to be skipped as well. The below works for skipping any row with the word "Yes", but it still includes 0 in the weighted average. Also, let's say the Column N contains a word and 0's, how can I skip that?
=SUMPRODUCT(($B$13:$B$15="Yes")*($I$13:$I$15)*(N13:N15))/SUMIF($B$13:$B$15,"Yes",$I$13:$I$15)
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
View 2 Replies View RelatedSheet one will contain the following:
DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
EXAMPLE:
2/23/2008Phill
2/26/2008 Bill
How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?
=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
OR
=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
I have an data in a columns. Here I need to count the non-blanks and blank records.
View 5 Replies View RelatedI have the following code that sorts dates for me, the only problem now is that I need it to leave any row untouched that has todays date or any date in the past in row G.
View 3 Replies View RelatedI have the following coding that I have tried in both the Sheet code and as a module at different times.
Sub CopyEmployed()
Sheets("Employment").Select
Range("A3:L200").Select
Selection.ClearContents
Range("D4").Select
Sheets("Act1").Select
- And there will be more here when I can get this first part working-
When I step through this works up to "Selection.ClearContents" but then ignores the next two lines
Range("D4").Select
Sheets("Act1").Select
and goes straight to the Private Sub coding below that I am using to change the sheet tab names (This is in the ThisWorkbook section and works perfectly)
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim LinkedCells As Range
Dim ArrayOfMatchingSheets As Variant
Dim i As Long
Set LinkedCells = Sheets("Menu").Range("E8:E22")
[Code] ....
I can continue to step through this until it eventually returns to
Range("D4").Select
Sheets("Act1").Select
It may then run the remainder of the coding but what I have tried so far produces more Runtime and type mismatch errors which I will post after I can fix this.
Bottom line is I dont want the change sheet tab code run - I need the remainder of the Sub CopyEmployed() to run.
How Can I Mkme Count for range A1:D100 And Skipping One Row
For Ex
Count Row A1 And Skipping Row A2 etc,
I'm currently working on a report and what I'm trying to do is get a Row of information to pull into 4 rows. My current formula looks like this:
=INDIRECT("'Paste SAP'!H"&IF(MOD(ROW()-1,4)=1,ROUNDDOWN(((ROW())+3/4),0)," "),1)
I change the bolded number to correspond to which row (1,2,3,0) but it's not functioning. I've done it with other but for some reason this one doesn't work. I've attached the template so you can see what it looks like. The problem is with the SAP Tab and the info from the Paste SAP tab.
I am trying to get excel to autocount starting in a7 and ending at a600, skipping 3 rows in between, and only gng from 1-10 then repeating and inserting a page break after the 10th line i have put an example in.
SAMPLE1.xlsx
I am working on an inventory sheet. Its probably only complex due to the amount of data. There are several hundred locations we service and these are in a single column, and then there is the equipment we use that is several hundred columns.
Each location uses 3 rows and the 1st needs the formula to equal 2 rows beneath it. i.e. cell E28 has the formula =E30. I basically need to fill down, but only put that formula into every 3rd row, as the two rows beneath this row need to stay blank, or show number i manually put into either.
The second part of this, is there a way once that is done, to just select those cells, and fill to the right all the way? Again, i do not need to fill the two rows under that one.
I have attached part of the sheet .....
The green cells are the ones that need the formula, and those will be copied down, and right. the others need to be left alone. I have been sitting here for an hour manually entering in the =XXX for each cell.
creating a formula that will automatically bring the cursor to the next applicable cell. We have template wherein there are extra cells in between those that we fill out. What I wanted to happen is for the cursor to go directly to the next cell that I need to fill up.
Example would be that cell a1 is where we type the name then the next cell will be c1where we will put the addreas. How will I make the cursor jump to c1 when ive filled in a1.
I'm looking to easily drag the sum of certain cells in a different column BUT keeping a specific range, it's hard to explain so i'll show an example...
A1
A2
A3
A4
A5
A6
A7
A8
B1=SUM(A1:A4)
B2=SUM(A4:A7)
B3=SUM(A8:A11)
And so on...
Is there any way I can do this by dragging down the cell formula from B1 and it remembering the range of 4, so I don't have to manually select each range...?
I have a dataset where I have 1 row for one person with different information, I would like to turn this into multiple rows eg,
Henry 37 Likes Peanuts Brother George 24 likes tomatoes sister Sarah 21 likes olives
into
Henry 37 Likes peanuts
I'm trying to total up some rows that are put in a repetitive order repeat. I can do this, but the method I'm using is highly inefficient. Is there some slick equation I don't know about?
Example below:
Worker 1 - Double Time - each of these has 200 columns for different job codes
Worker 1 - Over Time
Worker 1 - Regular Time
Worker 2 - Double Time
Worker 2 - Over Time
Worker 2 - Regular Time
Worker 3 - Double Time
Worker 3 - Over Time
Worker 3 - Regular Time
...and so on to 1000 workers
Total Double Time - for each job code
Total Over Time
Total Regular Time
i am useing colmn a only for input,
starting from cell A5 to the end of A,
so as i input data starting form cell A5 the active cell automaticly moves to the next row A6, so i could input another number but after ten rows it should skip an extra blank row and start this all again
but thats not the only prob, starting from cell B5 should count every ten rows and give it a number starting from 1,2,3,4... and no number should be on the blank row.
a b
5 223 1
6 234 1
7 987 1
8 787 1
9 976 1
10 324 1
11 345 1
12 455 1
13 247 1
14 685 1
15 ......................
I was working on a project this morning (I actually got help here but this is more or less unrelated) and ran into a strange problem. It seems the For loop that I was using is skipping cells.
Was trying to figure out the problem using this macro and a list or random garbage.
Private Sub CommandButton1_Click()
Dim number As Integer
For Each Cell In Range("A2:A500")
number = WorksheetFunction.CountIf(Range("A:A"), Cell.Value)
Cell.Offset(0, 1).Value = number
If number > 1 Then
Cell.EntireRow.Delete
End If
number = 0
Next Cell
End Sub
Maybe someone who actually know something about programming can straighten me out.
If ur using VLookup, can u tell it to skip the first result and find the second result and return it?
View 5 Replies View RelatedI have this example data range:
foo 3
goo 2
blu 5
I'd like to be able to chart this (clustered columns for instance) but when I delete value 2 from goo, I'd like the chart to skip that row altogether and not display "goo" and a blank space as its value. I only want foo and blu columns showing.
Is that possible?
I have Names in column A, Data in Column B. Example
A1 John B1 1000 C1 5:32:05
A2 Jim B2 500 C2 5:56:55
A3 John B3 600 C3 6:45:65
A4 Bill B4 300 C3 7:21:05
In another column I have the names of all the possible people that I will need data from and next to them I will need a formula to tabulate all their totals from column B and then another formula that will skip B and total column C's total.. I have a formula that I used from awhile ago when I needed to offset the data but I can't figure out how to just take the data to the right of it and then another formula to skip column B. Here is my old formula =SUMPRODUCT(($A$1:$A$291=G14)+0,OFFSET($B$1:$B$291,1,0)+0)
On the attached example there is a button called 'unsettled hedges', click this and it loads a userform. In this example, there are 10 rows of data that want a value entering into the 'returns' textboxes.
If you try to enter a value into all of the 'returns' textboxes and click the 'settle hedges' button then all the values from the textboxes should against the relevant row in column L of the 'unsettled hedges' worksheet and then each of these rows should be copied to the next available row in the 'settled hedges' worksheet.
This isn't happening though, instead, it is copying across every other row from the 'unsettled hedges' worksheet, leaving half of the rows still on the unsettled hedges worksheet.
I am trying to write a macro for an autofilter which is triggered if an optionbox or checkbox is selected, i.e. Value=True. What is happening is that when the either box is selected it filters fine, but when it is unselected, the data is still being filtered using the previous results. My question is how do I write a macro that will skip a filter macro if the value=false. For instance, can I write an if then statement which will either skip the macro all together, or filter the data in that particular column as (All)?
Here is what I am working with so far, but it's not working.
Private Sub optlc_Click()
If optlc.Value = True Then
Worksheets("Sheet2").Range("B1").AutoFilter _
Field:=2, _
Criteria1:="y"
[Code] .......
I have a spreadsheet containing a column of dates which I use as the data source for a mail merge. I need to convert the dates in this column from the format "18/02/08" to the format "18 February 2008" using Format - Date.
Problem is where the dates are missing the leading zero, Excel will not change these e.g. 3/2/08. Converting to text first did not fix it.
im trying to copy a data--paste special--transpose--
i want this data to be copied in a manner, tht the 1st entry skips 3 rows and then comes the next value??