I think this is an easy one, but i can't figure it out. I have a spreadsheeet with multiple concatenate functions programed in. All of them work. If, however, i try to change the formula inside the concatenate function it freezes and will not calculate the new cell. I have the calculation tab set to automatic in the options tab...
View 9 RepliesI have drop down fields using a vlookup to grab the corresponding data in a colums next it which is being concatenated into a one big cell. The problem is a set of other columns that I need to pull data from but its dependant to a previous column. In the attachment you see which ever region is selected the following column data is grabbed and the same goe for title. Now when the location is selected the info in its column should be selected that corresponds to the row that the specific title is on. example
if selected: North America>Secretary>Texas
results: A Crazy Mix->;typical,Notepad, pen,square dance
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
For the odds range, i have already two cells(the upper(F9) and the lower(E9)) and i have a cell named the current odd(G9). What are the formula together for the attribut cell(H9) for the following data:
1.0 : The current price is outside and below the odds range spread. For example, if the range is between 2,00 and 2,20, the range’s attribute will be 1.0 if the current price is below 2,00
NOTE: Obviously the formula for this one is =IF(G9
1.1 : The current price is on the bottom edge of the “odds
range” figure. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 1.1 if the current
price is 2,00
NOTE: The formula for this one would be =IF(G9=E9,1.1)
1.2 : The current price is inside the “odds range” spread
and is placed one or two clicks from the bottom edge. For
example if the range is between 2,00 and 2,20, the range’s
attribute will be 1.2 if the current price is 2,02 or 2,04
NOTE: I have a hard time creating a formula with this one.
2.0 : The current price is outside and above the “odds
range” spread. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 2.0 if the current
price is above 2,20
NOTE: The formula would be =IF(G9>F9,2.0)
I'm essentially trying to place a column that is largely based on another....a function that will calculate the following information
Carriers with 1 Vehicle - 25.00
Carriers with 2-4 Vehicles - 100.00
Carriers with 5-9 Vehicles - 200.00
Carriers with 10-24 vehicles - 400.00
Carriers with 25-49 vehicles - 750.00
Carriers with 50+ vehicles - 1500.00
In other words.
One column in my spreadsheet has number of vehicles. I want another column that will provide the according application fee as found in the information above.
If I want to create a function or sub that can be used by any userform or macro that I create for a workbook:
Where would I define that function? Within the Module?
Do I define it as Public?
I've tried many variations but I can't seem to find a solution - I hope you can help. I'd like a formula that will ideally achieve the following:
IF B5:F5 all contain the letter y then return "Pass"
IF B5:F5 AND G5:K5 all contain the letter y then return "Merit"
IF B5:F5 AND G5:K5 AND L5:K5 all contain the letter y then return "Distinction"
IF B5:F5 is blank return blank
IF there are Y's in B5:F5 and the total < 5 return "Fail"
I did a sample sheet to show the desired output but don't know if this forum supports attachments.
The formula below works great for counting. I need to use the same formula to CONCATENATE all of the names in B:B. It seems as though I should just replace COUNTIFS with CONCATENATE and change Data!C:C to Data!B:B, but it doesn't work. I tried a search on the web using the title of this thread but came up with very few clues. Is it even possible to CONCATENATE with multiples IFS?
=COUNTIFS(Data!C:C,IF(B2="All","*",B2),Data!D:D,IF(B3="All","="&W5,Data!E:E,"
I've attached a sample of the data I'm using.
I have two spreadsheets (the samples for which I have shown side by side in Sheet 1 of the attached file).
Spreadsheet 1 is about 30,000 rows and too large for me to change the formatting and structure.
Spreadsheet 2 is the output I need and the format is required by other stakeholders.
In spreadsheet 1 I want to sum quantity in stock for Type 1, Type 2 and Type 3 for each product and allocate it to spreadsheet 2 according to the month in which the product expires. For example, there will be a total of 92 units of product 413302 which will expire in Nov, 2014. Therefore I want 92 to be placed in cell N6 of Spreadsheet 2.
Unfortunately the product number is not unique - there are multiple sub products in spreadsheet 1 but they all have the same quantities of stock. The sub products are referenced in other parts of the report so I can't consolidate by Product Number. This also prevents me from using the SUMIFS function as it will duplicate the number found in the sub products.
What I need, perhaps in a combination of functions, is to find the first instance of product 413302 in Spreadsheet 1 that is expiring in Nov 14, sum the product types and give the result in cell N6 of Spreadsheet 2.
Is there a way to SET a RANGE that can be used for further editing without the need to specify the range each time for each function to be perfomed?
I have a pile of Data, with a Calendar date and 4 columns of data for each date.
I want to make a summary for each year separately of one column of data (Total PL). How can I set a condtion that it will output a summary of data for a given year, e.g. 1990?
Even more useful might be setting up a table for each year, where I will be able to perform easy function like SUM, MAX, MIN but it will use data only from the specific Year in each row.
- Is there a way to make it simpler, but not having to specify the RANGE for each Year for each Function?
* I have a complex Excel workbook with several worksheets.
* The first worksheet is for raw data, which consists of a single string of data, separated by spaces, to be uploaded to a mainframe. There is no consistent pattern of length of data or strings in between pieces of data, which can vary widely. An example of the data would be something like this:
XXXXX YYYYY NN XXXXXXX
* For testing purposes, I need to come up with a way to parse the data for easier viewing. The current approach is this:
* Take the string and divide it up into individual cells by using the MID function. In the above approach, this would split the data into four (4) different cells.
This is going to be a very complex workbook with data strings that can have 20+ elements in them, and have lots of separate records, etc. While this way should work (if everything is entered perfectly and no data structures ever change, etc.),
I am trying to somehow use multiple IF functions. I was able to use one IF function to disply '--' in a cell if a particular formula = 0. However I ran into a problem when negative values were displayed. I wanted the value to be a positive number. I thought I could use another IF function to multiply the formulas contents by -1 if it were <0, but I keep getting a #VALUE error in my cells. Is there a way I can have multiple conditions?
View 2 Replies View RelatedI am trying to create a custom function to act much like the database capabilities of excel in summing a column based upon multiple criteria of other columns. First, before I get too far, does anyone have an already built custom VBA function that will accomplish this? I find that using the built-in database functionality in excel is VERY slow!
Anyways, I am trying to pass an argument that contains multiple ranges (much like you can do with the SUM() function):
=MultipleSUMIF("E11:E14, F11:F15", "A1, E1", G11:G14)
The first set of arguments is the ranges that I need to look through. The second set of arguments is the values that I need to search within the first two ranges. The third argument is the column that I need to perform a SUM function on.
Instead of doing this, how can I create a function that will allow me to say, "Add another criteria range/value" and it will add another criteria to the list. I am currently passing a string, and that is not ideal, obviously.
I have a spreadsheet using Data Validation to offer a list of text values for cells in the range E6 - E100. I have a worksheet change funtion to change the colour of the entire row based on the text chosen from the list.
What I would like to add is an input box that will appear when the value in the cell = "COMPLETE" asking for a completion date and adding the inputted date to the cell in column I in the same row.
Existing Worksheet Change Code;
Private Sub Worksheet_Change(ByVal Target As Range)
'Colour code rows based on order status
Dim rng As Range, i As Long
Dim cell As Range, Answers As Variant
Dim Colors As Variant
Colors = Array(24, 15, 38, 44, 42, 20, 36)
Answers = Array("CLOSED", "SUSPENDED", _
"COMPLETE - Awaiting Inspection", "COMPLETE", "WORKING", _
"SCHEDULED", "READY")
Set rng = Range("E6:E100")
rng.EntireRow.Interior.ColorIndex = xlNone
For Each cell In rng
For i = LBound(Answers) To UBound(Answers)
If LCase(cell) = LCase(Answers(i)) Then
cell.EntireRow.Interior.ColorIndex = Colors(i)
Exit For
End If
Next i
Next cell
End Sub
I need to create a formula that counts the number of times that an age range appears within a column. In column G, there is a list of ages based on a demographic collection. The ages range from 13 to 50+. I want to designate another cell to count the number of times the characters between 13 and 18 occur within that column. I have =COUNTIF(G8:G20,"13") How do I add "14", "15", "16", "17", and "18"?
View 2 Replies View RelatedI have this formula
= COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
that returns the number 2 (which is correct). However, if I precede it with
AZ6/COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
it returns a DIV/0 error, even though AZ6 has a value of 24.
Surely 24/2 would return a value of 12? NB AZ6 cell value is derived from the result of a formula.
I have multiple IF functions in a formula and found out that the maximum allowed is 7 and should use Lookup instead. The formula is to calculate the Present Value of an amount with the corresponding interest rates and number of days left.
View 3 Replies View RelatedWhen using watch window to watch a formula that has multiple formula's in it, is there a way to see the result of 1 formula within the big formula?
E.g. say you have:
= SUMIF(A1:A11,"207",B1:B11)/COUNTIF(A1:A11,"207")
And you put a watch on that, but in watch window it shows the result of the whole formula, say if you want to watch only the SUMIF part?
Im using Excel 2003 by the way.
I am currently having trouble with what I thought was a simple IF statement. As you will see from the formula I want to complete a statement for every month of the year but Excel will not let me go past July. Is there a limit to the number of arguments in an IF statement and how do I overcome this? =IF($A$3="Jan'08", SUM(C7),IF($A$3="Feb'08",SUM(C7:D7),IF($A$3="Mar'08",SUM(C7:E7),IF($A$3="Apr'08",SUM(C7:F7),IF($A$3="May'08",SUM(C7:G7),IF($A$3="Jun'08",SUM(C7:H7),IF($A$3="Jul'08",SUM(C7:I7),"n/a")))))))
View 5 Replies View RelatedI have multiple rows that I wanted to concatenate. I want the values delimited to a symbol like +. The problem using the sample formula =CONCATENATE(A3," = ",B3,"+",C3,"+",D3) is if there's a blank row the + sign will still display. I attached sample file with the desired result.
View 5 Replies View RelatedI have data in sheet 1 and sheet 2. Sheet 1 contains a product code and line number and sheet 2 has the corresponding cost.
I want to be able to bring back the cost to sheet 1 without having to concatenate the product and line number.
I'm sure this is possible with a formula, but I am currently stumped.
I pasted the sheet 1 and sheet 2 data below. Note that the sheet 2 data extends the full row and does not wrap.....
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
I have a formula, and it works okay, but I have to change it based on how many characters appear in a cell. I would like to avoid this, as there is just too much room for error.
The end result of my formula is to get a result like the following: U1C01EP or U1C01L04EP depending on which columns are completed. But the "variation" on the number of characters in the cell (1 or 2) and accounting for the leading zero is what is getting me confused.
In cell R4, I have the following formula:
=IF(S4="","",IF(X4="",CONCATENATE("U",V4,"C0",W4,$R$1),CONCATENATE("U",V4,"C0",W4,"L0",X4,$R$1)))
Column V always contains only 1 character, so this is not an issue. "U" will be added before the contents of this column in the formula
Column W will contain either 1 or 2 characters. If there is only 1 character, the concatenate needs to add a leading 0 following the "C" and then the contents of column W.
Column X will contain either 1 or 2 characters. If there is only 1 character, the concatenate needs to add a leading 0 following the "L" and then the contents of column X. Now this column may also be blank, if that happens, then there should be no "L" within the result, that portion would be left off.
Cell R1 contains the code that is added to the very end of my result. This code will change, so it is placed in a fixed location to be added to the end.
And I would like to keep the IF statement that I wrote accounting for Column S being Blank, yielding a blank cell completely as a result.
I am having trouble evaluating two conditions with nested logical operators to produce the output I need.
For example Condition 1 has 5 choices (A,B,C,D,E) and Condition 2 has 3 choices (a,b,c).
Breaking it down,
[Condition 1] option "A" always applies and should give "Yes" (No matter [condition 2], "A" always gives "Yes")
[Condition 2] option "c" always applies and should give "Yes" (No matter [condition 1], "c" always gives "Yes")
[Condition 1] option "D" never applies and should give "No" (No matter [condition 2], "D" always gives "No")
[Condition 1] options "C" and "B" only apply if [condition 2] is "b" (if so, the answer is "Yes")
What I need is the equivalent of:
if ((([condition 1] == A) || ([Condition 2] == c)) || (([condition 1] == B || C) && ([condition 2] == b)), "Yes", "No")
I want to put a formula in a spread sheet that if block f5 is equal to or higher than 20% of block b4 then block d3 * .0 if less than then * by .0078
View 14 Replies View RelatedI have a model that does a projection for 36 months ahead on a spreadsheet. The projection depends upon a randomising "volatile" function. When I press recalculation a new projection is generated. I want to capture the set of numbers that appears at month 36 through repeated recalculations written to a separate sheet. I want around 500 of these numbers.
I have no experience with macros so doing it with preset functions would be preferable. If it has to be a macro, the easier the better. If invoking the spreadsheet and outputting to a flat file is easiest that is fine too.
I have several formulas that I use over and over, so I'm creating VBA functions that I can call from a worksheet.
But...when I have multiple inputs going into a function, is there a way to remind the user which input comes next in the same way that Excel does with built-in functions?
For example, when you type in =PMT( Excel brings up the helper text so you know that the order of inputs is (rate, nper, pv, etc....
Is there a way to bring up that same helper text in my own function? So if I have up, down, right, left as inputs and give the spreadsheet to someone else, they can see it's up, down, right left and not right, left, up, down .
I've got an indexmatch that works great
=IF(ISERROR(INDEX(accountstaff,MATCH(B$20,INDEX(accountstaff,,1),0),MATCH($ A55,INDEX(accountstaff,1,),0))),0,INDEX(accountstaff,MATCH(B$20,INDEX(accou ntstaff,,1),0),MATCH($A55,INDEX(accountstaff,1,),0)))
But I need to incorporate IF statement based on varying levels of revenue and think VBA will be less cumbersome, but don't know how to combine else if and index match.
I am trying to accomplish this:
IF B$20 (which is a dollar amount is = X, then index, match....
IF B$20 is > Y but < Z, then index, match...
I've searched quite a few times for Concatenating Multiple Columns and ones for Concatenating with Spaces.
I've found solutions that say use
=concatenate(A1, " ", B1)
or the VBA equivalent
I have at least 15-20 columns which I wish to concatenate.
Is there an easier way than to type for all 15 columns?
=concatenate(A1," ", B1," ", C1,....)
Also, the number of columns of each row vary