I have a small query about excel and whilst there is a really simple answer i'm struggling a little bit. I have create a score metric for data surrounding search data.
Basically i need a macro/formula that will take a list of values that may include duplicates and add up the corresponding score and place the results in a table.
See below - the macro will look at a list of values (column b) and add the scores up (column d) and then remove the duplicates and populate the score in (column f/g)
I was given a spreadsheet this morning for sorting and am a little lost. I've attached a sample. I'd like to sort the spreadsheet from high to low in terms of gift amount. The problem is that if I sort the Gift Amount column, all of the surrounding information gets sorted as well, messing up the layout. I know I'm missing something here. Is there any way to tell Excel that if it sorts something, sort the surrounding data as it is? Maybe by giving it a range name?
If I write some VBA that selects a specific cell, for example the highest value in a coumn of data, how do I then copy a given (say 3) cells above and below (and including) this selected cell.
I have about 25 workbooks with 180 formulas in them that I would like changed. The formulas are all in the range I10:Q29 and all have the same basic structure:
[Code]....
I would like to remove "filepath1!cell1*filepath1!cell2-" and "filepath1!cell2-" so that only "(filepath2!cell3*filepath2!cell4)/(filepath2!cell4)" remains.
My VBA is pretty weak, but I imagine it should be possible to use something like the VBA equivalent of len() and mid() to isolate the components of the equation to the left of the - in the numerator and denominator, and remove those components (as well as the -) from the formula.
Having the Zip Code Tabulation Module from the US Census Bureau, I have the following and much more. But based on the 3 items : 5-digit Zip Code, Longitude, Latitude.
I'm wanting to Select a Zip Code and have (let's say) several Zip Codes plotted (maybe 4 - 10) out from the center point of the map. either with, or without a connecting straight line .
And possibly a Scalable Miliage indicator |---- 10 Miles ----| which would be based on the distance.
I'm trying to create a spreadsheet to update daily, whenever our market intelligence arrives by email. I'm not trying to write a macro which can select a range of cells (G:L) relative to the date in Column B, which represents the value in cell P6. In other words:Read the value of cell P6 Find that value in column B (e.g. B646)highlight the cells in columns G through to L on that row (e.g. select G646:L646) I am then aiming to paste the values in that range of cells, so that those stay in the spreadsheet and are not lost when the next lot of figures comes in the following day.
I keep track of values in a workbook. I accumulate them on a daily basis (business days) and keep track of the older values.
On the first sheet I have all current values automatically displayed.
All subsequent sheets contain the values for the different locations (>60) by one location per one sheet with multiple entries per location.
Most of the values do not change daily. So I copy the values from the previous day and paste them to the current day’s fields (the row below yesterday's values).
Today’s date (and prior dates as well as subsequent dates) are in column A, the values to be copied are in column B through AZ. With over 60 sheets this job becomes very tedious very quickly...
What I would like to be able to do, with a click of a button, is to go into each sheet (except the first one), go to the current date (in column A), select the field to the right of that date (in column B), go up one field, select both fields (today and last business day) and go from B to AZ (or A to AY in relative terms) copy all those entries, go down one field (to the same row as today’s date) and paste the content. Then repeat that for every following sheet…
As the date field that I am looking for goes down one field with each day I cannot use fixed points to copy and paste from, but have to use the date field as an anchor from whence to find the proper cells.
I do have some values in the following day's fields, that is why I need to copy two rows and not just the values from the previous day...
If I have a scoring grade for different categories (8 in total) & the grades looks something like that: 1a=500, 1b=400, 1c=300, 2a= 250, 2b=210...& so on till 4c, but with different numbers for each category.
I need to come up with a total score of points if a person is given a certain grade from the above. ex. if they scored 2a on a certain category, 1c on another & with all the rest of 8 categories scored. The number i need to come up with is the total points.
I'm doing a GCSE project for which I need a little help with Excel.
I have a set of data about a persons monthly spending habits on
Food 300 Entertainment 200 Clothing 100 Transport 260
The pre calculated budget allowance for the month was 500
I would like to write a formula that would do the following; give the person an score out of 1.1-10 based on how well he spent on the above items which are in order of priority (i.e. it is better to spend more on food than on entertainment etc) And then an over all score (1.1-10) that will reflect how well they spent.
I am looking for helping with an excel scoring programme i am designing. The programme is ready to go. But i was wondering how clever excel was. Basically i need to create some results from the programme. Normally i do filter auto filter, which is great but not very fast if doing it manually. Would excel be able to do this.
The data i am using is always changing. I would need for it to filter the three teams, by a name defined in three cells one page. Once the three teams have been filtered i then need to get the top four scores and copy and past them into a new sheet.
I have tried recording a macro, but this does not seem to like me changing data. And is also very restrcitive. As the programme is used across three league.
I am not so sure on the correct formula syntax or the correct terminologies to ask this next formula question. It is visualy explained clearer in the spreadhseet provided.
I couldn't find a solution to where I'm at now, but Derks formula... = SUMIF($J$5:$J$44,J5,$K$5:$K$44)/COUNTIF($J$5:$J$44,J5)
from... excel formula
...Almost gets what I need, but my data will not always be in a high/low descending order. I'm braindead; I can't think of how to make this formula work.
I'm creating a basic Dart scoring spreadsheet, and its been going absolutely fantastic, but then I was asked to create the Sets and Legs, thats when I got stuck.
I'm looking for a formula (or anything) that will add a Set when the Legs reach the number 3, and then again but make it 2 if that player gets another 3 legs. If you know darts you will understand what I mean.
I am putting together a worksheet and analysis sheet for relative scoring of text values. (i.e. High = 3, Med = 2, Low =1, Yes = 2, No = 1, etc. I have a problem in finding a formula that will work to retain these values of text and calculate a relative score from the answers or text provided.
Have used excel for a while but never the need to go past SUM or AVG, etc.
Im trying to set up a point scoring sytem for 3 teams in various events. the highest scoring team would get 2 points, 2nd place 1, 3rd place 0. If 2 teams tied for first they both get 2. If they tie for second they both get 1. I spent 30 minutes before I came up with
=IF(AND(B3>B4, B3>B5),2,0) and =IF(OR(B3=B4, B3=B5),1)
Spent another 15 trying to figure out how to put the 2 together. Finally realized a)Im missing a whole bunch of formula, b)There is a lot more to excel than I thought I knew.
B3,B4,B5 are the teams scores. Looking for any help at this point. Even a push in the right direction.
I have a scoring system I monitor in excel (I have attached an example speadsheet). I score against a number of criteria e.g. criteria 1 scores "2", criteria 2 scores "4". My problem is that the criteria don't always attract a score, sometimes they blank. I also need to specify which criteria I want to count in the scoring as they are not always relevant every time.
I need formulae that will take this into account and be ready to total up only when a score is there (COUNTIF?); and out of the range of scores I want to total up only the specified criteria at choice (SUMIF?).
My COUNTIF and SUMIF skills are failing with this which is very complex for my level.
What would the formula be in each instance? I have attached the file to reference the cells that I have questions about.
Question ?A: - is this a COUNTIF? In this cell I want to calculate the number of occurrences where there is a score detailed, but only for specified criteria, for argument's sake criteria 1,2,3,4,7 & 8
The answer would be 5 in this instance, not 6, because Criteria "3" did not receive a score.
I would want to have other cells which would calculate the number of occurences where there had been a score but using different combinations of criteria
Question ?B: - is this a SUMIF? In this cell I want to calculate the total sum of scores for those specified criteria where there has been a score The answer would be 13 in this instance (3+2+4+1+3 from the scores that occurred for those specified criteria) I would want to have other cells which would calculate the total sum of the scores but using different combinations of criteria
create a unique scoring system on a set of given criteria that enables an even split in work for team members. so i.e. work comes in, and depending on the criteria of work its then passed to the relevant team member based on points. At the moment work is allocated A-Z which is working out unfair on team members as some are getting more/less work than others...a points system will enable a even split. so if a piece of work scores 30 points it goes to a junior member, if a piece of work scores 80 points it goes to a senior member and so on...my problem is how to link the points and criteria...Im guessing joint vlookups will be needed.
the only other way i can think a system is similar is like a fantasy football system...points based on criteria.
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N: =SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O: =INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula) =INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names Column L = list of all golfers scores Column N = lowest ten scores in order
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N: =SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O: =INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula) =INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem ... .Fields.Item(1).value = activecell 'activecell value = "Joseph" If Not isempty(activecell.offset(0,1)) Then .Fields.Item(2).value = activecell.offset(0,1).value Else .Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works End If ... End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty ' or .Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following: - there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J Email in Column L Memo in Column N Balance in Column T Due Date in Column P Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L Subject: "Company Payment Remittance Payment Date *Date from Column P*" Body: Hello *Name from Column J*, For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:Â
For Each b In myrange If Application.IsNA(b.Value) Then Employee = b.Offset(0, -2).Value SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found") b.Value = SSID End If Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:Â
Private Sub CloseButton_Click() Unload UserForm1 End Sub
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
