I have a problem here:
Eg.
A B C D E F G H I
1 8 pm 9 pm 10 pm 11 pm 12 am 1 am 2 am
2 8 pm 11 pm
3 8 pm 2 am
I typed a formula : =if(and(c$1>=$a2,d$1
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View Relatedproduction01.png
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Excel 2007
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
I am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View 6 Replies View RelatedI have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies View RelatedI found this formula similar to other formula
NETWORKDAYS(D1,F1)-1)*"18:00"-"9:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"9:00","18:00"),"18:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"9:00","18:00")
By the way ....D1 = start Date
F1 = End Date
E1 = start Time
G1 = End Time
It's GREAT! But now I need include time from 6:00 a. m. to 10:00 p. m. (I already modified your formula:
(NETWORKDAYS(D1,F1)-1)*("22:00"-"6:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"6:00","22:00"),"22:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"6:00","22:00")) because are regular working hours in Colombia but:
1. All the days (Monday to Saturday) are working days
2. I just want to calculate the time in shifts, I don't specify the start date and end date. Example: 8:00 p.m. to 11:00 p.m. Result: 2 hours, because 1 hour is after 10:00 p.m.
This are two different options, so I need two separate formulas.
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form.
6 = 0.1 36 = 0.6
12 = 0.2 42 = 0.7
18 = 0.3 48 = 0.8
24 = 0.4 54 = 0.9
30 = 0.5 60 = 1.0
I'm trying to devise a formula to produce "days in inventory" based on the following data:
Date In
Date Out (which may be blank if cargo still here)
Todays Date
Days in Whse (which is the formula I can't figure out!)
It needs to work like this, date out - date in, unless date out is null. If date out is null, the result should be calculated based off of todays date - date in.
Below is my data
Complexity Type
Name
1
2
3
4
5
6
7
Ali,Shaheen Sultan
8
34
34
6
0
0
0
Budati,Manoj Kumar
7
18
18
12
6
0
0
Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.
Complexity
Times Complexity 1
1
1.00
2
1.41
3
2.03
4
2.92
5
3.19
6
4.10
7
4.65
I want to calculate time left in hours from today to target date. The result should be exclude weekend/holidays and non-working hours too.
View 3 Replies View RelatedI have been asked to make some ammendements to a workbook currently in use.
I have to calculate elapsed time, and my formula is giving me odd results. I have a start time (cell B5), and an end time (cell F5). The formula being used was =IF(F5>0,((F5-B5)*24)) which gave the correct result. The cell is formatted as general. It didn't alot for the situation where the end time has not happened yet.
I changed the formula to =IF(F5>0,((F5-B5)*24),(K5-B5)*24) where cell K5 is the current time. The results are coming out with 6 - 9 decimal places. It makes no sense as I've tried setting the times to be exactly 24 or 48 hours to the minute. I've also tried replacing K5 in the formula to now(),
I want to calculate labour rates as follows:
06:00 to 18:00 std rate $10
18:00 to 06:00 night shift rate $15
I want to be able to type in the hours worked e.g. 11:00 to 19:00 and would expect 7hrs at $10 and 1 hr at $15.
I'm working in excel2007:
I want to write a generic formula to calculate the difference of time between cells, the first being a real data point, such as
6/22/2007 8:53
minus a generic constant term using the same date and a given time, 8:30.
So, what I need is something like this:
6/22/2007 8:53 – (same mm/dd/yy @ 8:30)
6/22/2007 12:29 – (same mm/dd/yy @ 8:30)
6/25/2007 11:19 – (same mm/dd/yy @ 8:30)
attached is an example of a timesheet we use.
now after lengthy discussions the comany say its not 'in their interest' to use acess so i'm stuck with excel on this one.
I need to sum a column on many critiera, which i feel maybe a job for the trusty old =SUMPRODUCT. But thing is i need to sum a column based on a date range, Rate, Day.
I have manually typed in the number i think it should produce but as far as formulas go
1st off need to calcualte date range, which is situated on the top of the spreadsheet.
2nd some how tell the formula that Normal overtime is either classed as rate 1 Saturdays classed as 1.5 and sundays and bank holidays classed as 2.
I am a flight dispatcher who is having difficulty with a Flight Duty Period tracking sheet. I need a formula which gives me the total duty time of a pilot in one single day, which is calculated by using the DUTY START time of first flight and DUTY END time of last flight in the same day.
I have attached the excel file. Please download file and open the FDP tab from the file and goto cell AI7.
Basically I need a formula in cell AI7, which checks up the date on column D and selects a date range of the same date in column D (in this case D7:D8) and then give the difference between the Duty Time START of FIRST FLIGHT (column AF) and Duty Time END of the LAST FLIGHT (column AG).
Ex: 12:05-9:20 =2:45
Please note that I want the formula to automatically check the cells in column D for the dates, not manually select the dates, because pilots do more than one flight per day sometimes and it is never same. Formula than should be able to calculate the difference between the largest number in column AG and lowest number in column AF in the same date range mentioned before.
Uneven number of flights on different days is making it complicated for me.
I am using the below formula to distinctly count the number of customers that match the criteria that I have in Cells C7 and B10. The data is in a separate worksheet, that I am showing Named Detail of which will be changing on a monthly basis, so a pivot table does not want to be used. The detail data ranges from row 7-40,000, and the file is currently 8610KB's, and can potentially grow.
=SUM(IF(FREQUENCY(IF(Detail!$A$7:$A$40000=C$7,IF(Detail!$B$7:$B$40000=$B10,IF(Detail!$D$7:$D$40000<> "",MATCH(Detail!$D$7:$D$40000,Detail!$D$7:$D$40000,0)))),ROW(Cust)-MIN(ROW(Detail!$D$7:$D$40000))+1),1))
This formula works but takes an excessive amount of time for one caluclation, and I need this for multiple column and row critera. So, can this calculation be changed in order to get the same result with faster calculation time? I am using Excel 2003.
I have a function which i am using as part of a macro. The macro itself works fine and locates a search string i type into an input box across ALL worksheets in an excel doc. However, i have a function which takes the results and prints it to the front page, but when i try to use the worksheet name which has been passed to the function, i get the error: Run-time error '42': object require. this happens when i get to a line of code which says
View 2 Replies View RelatedI am having a problem with a run time 13 error on a variable assignment. The variable is being assigned a value from a cell that contains a formula, and I am suspicous that perhaps the mismatch is coming thru this. The de-bugger stops on:
Area = ActiveSheet.Cells(count + 41, 8). Here is the complete code (with all my poor coding skills!)
Sub Reservoir()
Dim Inflow As Single
Dim Withdrawal As Single
Dim Evap As Single
Dim Area As Single
Dim Spill As Single
Dim Stor_1 As Single
Dim Stor_2 As Single
Dim count As Integer
Dim max As Integer
max = ActiveSheet.Cells(9, 4)
For count = 1 To max * 12
Stor_1 = ActiveSheet.Cells(count + 40, 11)
Inflow = ActiveSheet.Cells(count + 41, 4)
Withdrawal = ActiveSheet.Cells(count + 41, 6)..........................
I need to calculate the time spent replying to my inquiries: I log the time I receive my inquiry as: 06/02/2009 09:23:00 in column A. I log the time I send my reply as: 07/02/2009 07:23 in column B. In column C, I need to put the Formula that will return the following result: 0 days 22.0 hours.
View 5 Replies View RelatedOn my spreadsheet i have a bunch of variables:
A1 = Arrival time at Checkpoint 1 - 5:53:08
A2 = Time to destination from Checkpoint 1 - 1:10:18
B1 = Arrival time at Checkpoint 2 - 6:00:56
B2 = Time to destination from Checkpoint - 1:02:30
C1 = Total distance from Start - 2.83
C2 = Arrival Time at Destination - =SUM(A1,A2)
D1 = Speed determined from the other variables
D1 is SUPPOSED to equal 25.00
It also is where I am stumped!!
Not only can I not figure out the math but also how to format the function to get the right answer.
ps: Arrival Time at Destination is only included in case it would be useful to find the answer!
when i input the arrival time of A Car, the time he arrives late appears in column D it should read 15 Minutes. how i can get this time to appear automatic after i have registered the arrival time. A Car due at 19:00 arrived at 19:15. 15minutes late. I would be grateful if you could lead me in the right direction.............
View 3 Replies View RelatedI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View Relatedis it possible to have a formula that will update todays date not by 12am but by 6am.
so if i have =now() in cell b1 and my current time is 6:05 am it should give me 21-05-2009 not 20-05-2009
i am trying to get this formula in cell f1.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
d9 is where i enter my start time from a drop down menu and
d10 is where i enter my finish time
what i would like to do is have a formula to work out my total hours work then minu 45min and tell me whats is remainig which is over time
example
i start work and 06:00 and finish work at 15:00 which is 9hours i then remove my 45min break which then give me 1/4hour (0.25 of an hour) as over time
the 0.25 is then timesed by a figure of say 13.4481 which would then tell me that i have earnt 3.362025
and so on eg if i have 0.5hour it would tell me what that work out as.
I need formula (not VB) that will add time (0:30 minutes to each working shift) when these times are exceeded:
11:00
+0:30
19:00
+1:00
35:00
+0:30
[Code] .........
WHen I was a beginner at Excel, I came up with the following formula to calculate the time difference between two "time" values. Since I was too lazy to add a ":" between my hour and minute, I had decided to simply enter the start (column B) and end time (column C) as a military time (e.g., 0100, 1230, 1500, 1930, 2300, 2359). The following formula would be in Column D.
=IF(C7
how to find the average times of two different sets of groups. There are the baseline times and intervention times. Both groups have three subtopics: Time Fell Asleep, Woke Up, and Duration (how many hours I slept). I am not sure how to find the average of each subtopic. Here are the times....
Baseline times:
Fell AsleepWoke UpDuration
2:30 AM10:00 AM7:30 hrs
4:30 AM12:30 PM8:00 hrs
[Code]....