2007 - AutoFilter

Dec 4, 2007

We have a large list of data with an autofilter on it. On column, R we want to show ONLY Blanks. Once we have the Blanks filtered, we put the word, TRADE (or any other word that you want). We finally select all the TRADE cell that were previously shown as blank and highlight them yellow. When we cancel the filter, all the rows in between are now highlighted yellow whereas in Excel 2003, only the rows that we highlighted when the filter was in place had the yellow highlighting.

There is a workaround that you can select each cell individually, apply a fill color, go onto the next cell, apply the color, etc but that is not efficient.

View 9 Replies


ADVERTISEMENT

Autofilter 2007 Vs 2000

Sep 7, 2009

In using Autofilter on a Date column in Excel 2007 compatibility mode (Vista) and in Excel 2000 (XP), I receive different selection criteria (see pictures attached). In Excel 2007, I can select by year, by month. In Excel 2000, I am presented with all dates available in the filtered column.

I realize I can do a custom filter in Excel 2000 with a range of dates to select only the month I wish to query but this is cumbersome for the user. Is there VBA code available that will allow the same or similar selection criteria in Excel 2000 as is available in Excel 2007?

View 4 Replies View Related

Excel 2007 :: Autofilter On Cell Value

Nov 24, 2011

I'm using Excel 2007. I'd like to be able to autofilter on a particular value that I put in cell J5. How can I do that syntactically?

View 4 Replies View Related

Copy AutoFilter Range In 2007

Feb 15, 2008

I am experiencing a problem with the autofilter function, but ONLY in Excel 2007. The "visual" filter works fine, but using the filtered range is a no go i.e selecting, copying and deleting an autofiltered range. The trouble is that the autofiltered range also includes all the (in this case) rows in between the target rows, which then means that the filter is more or less useless as a range selection tool.

Example code which was originally developed by Dave H.:

'Filter rows with autofilter

With ActiveSheet
.AutoFilterMode = False
With .Range("B5:N5")
.AutoFilter
.AutoFilter Field:=13, Criteria1:="Criteria"
End With
.AutoFilter.Range.Select

View 9 Replies View Related

Copy AutoFilter Data 2007

Apr 25, 2008

In 2003 when you use autofilter and then tried to copy the resultant information, you would only get the visible items that remain as a result of the filter. For example if you have a list of employees in alpabetical order in Column A and then in Column B you have the State in which they are employeed. Now if I use auto filter and filter on Column B to get all employees in the state of Ohio, that is all that will be visible on the screen. Perfect that is what I want. Now I want to copy all of these employees and paste them into another document or spreadsheet. (don't forget that because the list is sorted by employee all employees in Ohio are not next to eachother in the list so there are a bunch of rows that have been filtered out. and for the sake of explaining the dilema here we will not resort the list as this is a very basic example of the problem that I am having and resorting the list may not work in every case.)

In 2003 I would simply select the top left cell in the list and hit Control+Shift+End to select the all of the results and then simply copy this over to another spread sheet and I will get exactly what I was looking for. In 2007 if I go through this same process, and paste the data to another location, all of the data, even the rows that were filtered out, will come through. The whole purpose of the autofilter is to weed out what you don't want. However in 2007 this does not work in 2007.

View 3 Replies View Related

Excel 2007 :: Autofilter Not Equal VBA With Array

Mar 21, 2013

Code:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")

I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.

View 1 Replies View Related

AutoFilter Changes Data Labels In 2007 Chart

May 16, 2008

I have a scatter chart and have applied data labels using the VBA macro supplied with Excel 2007. They pick up the cells in column A. But I now want to use Autofilter to show different ranges in the chart. Everytime I filter the chart data, the data labels change to show a different label (in fact they seem to be starting from the first label again, even if this value is not shown on the filter). I have tried to edit each data label and enter free text, I've also used a formula to link to the cell and made it absolute, but nothing is working.

The chart must be a scatter chart as it is plotting 2 values. I'm trying to create a Project Portfolio Risk Chart showing Benefits against Difficulty.

View 9 Replies View Related

Excel 2007 :: Removing Blank Rows - Autofilter

Nov 8, 2011

I have several sheets with about 250,000 rows per sheet.

But, even I sort by Column A, there are STILL hundreds or rows that are total blank interspersed down the page . . . I can't autofilter for blanks because there is too much data . .

How can I get rid of them?

View 2 Replies View Related

AutoFilter Method Of Range Class Failed - Yet Autofilter Works.

Sep 25, 2009

Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:

View 3 Replies View Related

Copy Top Cell Post Autofilter And Reapply Autofilter Based On Cell Value

Aug 20, 2014

I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.

E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA

Note: Row 1 contains command buttons and row 2 Headers.

View 4 Replies View Related

Set Autofilter To All Without Removing The Autofilter

Jan 16, 2007

I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.

View 2 Replies View Related

AutoFilter

Jul 25, 2009

auto filter options in excel. For some reason it is only sorting up to row 140.

View 14 Replies View Related

Autofilter On More Than 2 Criteria

May 15, 2008

Say you have a long list of data, and you go to Data menu --> Filter --> AutoFilter

And then you want to use the Custom AutoFilter. Here's a screenshot:

[url]

Is there any way to do MORE than two autofilters?

View 12 Replies View Related

Autofilter With More Than Two Conditions

Aug 3, 2009

I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.

View 10 Replies View Related

More Than One Autofilter On One Worksheet

Sep 17, 2009

Is it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).

View 2 Replies View Related

AutoFilter Is ON But Not FILTERED

Apr 16, 2014

I have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.

For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.

Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.

So far, no good luck..

View 1 Replies View Related

AutoFilter 0's & Non-Blanks

Sep 20, 2008

The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?

How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?

I have 2 more questions within this .....

View 13 Replies View Related

Array In Autofilter

Oct 1, 2008

When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?

View 10 Replies View Related

More Than Two Criterias In Autofilter

Nov 3, 2008

i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.

Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?

I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.

View 8 Replies View Related

Last Visible Row With Autofilter

Jun 2, 2009

I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:

View 4 Replies View Related

Resetting AutoFilter

Aug 13, 2009

Code runs rather slow. Is there a better way to achieve the same results?

View 5 Replies View Related

Autofilter To New Workbook

Oct 8, 2009

I have a workbook of approx. 60,000 rows, with about 20 columns including a source identity column, such as 'Leeds' , 'Barnet' etc..

What i need is a solution that will auto filter all rows that have a value of 'Leeds' in the source column into a new workbook called 'leeds.xls' for eg. and so on (for each unique source value) and loop until the whole data set has been filtered.

Saves manually filtering, copying and pasting....over and over.....

Im guessing the VBA needs to build / look at an array etc...

View 14 Replies View Related

Setting AutoFilter Via VBA

Jan 20, 2010

This macro was working just fine, now it generates an error on the line in red.

View 2 Replies View Related

Using An Autofilter Instead Of LOOP

Feb 11, 2010

I have an spead sheet with 9 sheets 1 master and 8 sub sheets. The master sheet runs for col A to AV and the it can have x amount of rows. At the moment i use the following but this takes an age.

View 9 Replies View Related

AutoFilter & Find Using VBA's

Feb 20, 2010

The attached file has two sheets, “order” sheet and “stock” sheet. Can some help me with the followings:

1-In either sheet, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, the VBA performs an Auofilter of the cell I have selected.

2-In sheet “Orders”, I would like a VBA where if I put the mouse on a cell and then click the VBA button it takes me to sheet “stock” and performs a find function of the cell I choose in sheet “orders”. For examples, if I put the mouse on cell E21 in sheet “orders” and press the VBA button, it takes me to cell H297 in sheet “stock”.

3-In sheet “stock”, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, it takes me to sheet “orders” and performs an Auofilter of the cell I choose in sheet “stock”

View 12 Replies View Related

Turn Autofilter On And Off?

Nov 23, 2011

I have a code that will look in column C for all rows with data, turn on autofilter and copy the data into column A.

Then do the same in column D, paste into column A.

And finally the same in column E, paste into column A.

But I think the autofilter turning on and off might be a problem.

Code:
Sheets("PP").RAnge("A2:A50").ClearContents
Dim LastRow1 As Long
RAnge("C1").Select

[Code].....

View 6 Replies View Related

Selected (Autofilter) Without Using VBA

Jan 1, 2012

How to achieve by formula what was selected in autofilter without use vba.

View 4 Replies View Related

Autofilter And Delete In VBA

Feb 15, 2007

From my data set I would like to delete all rows that show "Yes" in Column I.

I copied this piece of code a few days ago from this site and have attempted to modify it eg by altering Columns to "I" and Autofilter Field to 9 and Criteria1 to = "Yes", but without success. Can you please help?

With Columns("A")
.AutoFilter Field:=1, Criteria1:=""
.Range("A2:A" & Rows.Count).EntireRow.Delete
.AutoFilter
End With

View 9 Replies View Related

Table With Autofilter

Jul 1, 2007

I have a table with Autofilter, on B5: J5000. I want to insert a value in cell B2 and the list should shows only the values equal with B2.

View 9 Replies View Related

AutoFilter Macro For Does Not Contain

Jul 17, 2007

I have an Excel 2003 worksheet that has a list (Data > List > Create List), which displays the AutoFilters for each column in the list. I am seeking a macro that will filter the results (Custom > does not contain "Closed").

I would like to assign the macro to a button as the casual user might not understand the AutoFilter use.

The worksheet in VBE is defined as "Sheet3 (Audit Findings)"
My list has headers on row 7 (A7:K7)
I would like the AutoFilter to return all results except those marked as "Closed" in column K.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved