I created a popup menu when you click the right mouse bhutan .. ok?
Now I would like to access the pop-up Main excel, where you click with the right mouse button and appears Cut, Copy.
then I would like to add a new a item in this pop-up
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedI need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies View RelatedIn my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
View 2 Replies View RelatedI have Sheet 1 that does some calulations and will Output my values e.g.
1X2X
44XX
3XX1
there are also - - - - in the cells for some cells that does not meet my calculations..
So now i have a bunch of - - - - and 1X2X numbers inside sheet1.
Now what i want is to display a Summary of my Cells in the MAIN sheet. just the cells which contains values like 1X2X only.
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies View RelatedI want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
View 4 Replies View RelatedI want to calculate all datas from everyday of a month in a main sheet which is like;
{=average(if(('(1)'!$C$3:$C$15=C3)*('(1)'!$V$3:$X$15>0);'(1)'!$V$3:$X$15);if(('(2)'!$C$3:$C$15=C3)*('(2)'!$V$3:$X$15>0);'(2)'!$V$3:$X$15))}
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
This file contains 2 sheet Main M and Detail D.
In Sheet Detail D, When I choose Code, month of Project, it will be shown the result.
By the way, tell me how to delete the Auxiliary column in Main sheet.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
View 7 Replies View RelatedI have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
View 2 Replies View RelatedI'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
View 4 Replies View RelatedIm looking to export a sheet from excel to access. The sheet has the same tables as does the access database. I need the code for this because I dont want to have to import from access manually each time.plus my users only have permission to use the excel sheet, as I dont want them messing with the info. Any Ideas?
View 7 Replies View RelatedI used the xlveryhidden method to hide a worksheet that contains all of my validation lists for drop-down range names. Unfortunately when I try to access the sheet without unhiding it, I get a Microsoft Visual Basic Run-time error '1004': Select Method of Worksheet class failed
Is there a way to let VBA access the xlveryhidden sheet through a macro without unhiding the sheet?
I'm trying to loop thru the various sheets in a workbook but am having trouble accessing the current sheet name. what I have below does not work and I am stuck with how to access the current sheet name, interrogate it for what it is named, and skip processing if it is a particular name.
Private Sub dispnames()
Dim b As Integer
Dim r As Integer
Dim iSheetCount As Integer
Dim iSheet As Integer
Dim sh As Worksheet
Dim wsht As Object
iSheetCount = ActiveWorkbook.Worksheets.Count
For iSheet = 1 To iSheetCount
wsht = sh.Name
If wsht = "summary" Then
Goto skipit
End If
Worksheets(iSheet).Activate
r = Range("A" & Rows.Count).End(xlUp).Row
Range("A2:" & "A" & r).Select
Selection.Copy
Sheets("summary").Select
b = Range("Z" & Rows.Count).End(xlUp).Row + 1
Range("Z" & b).Select
ActiveSheet.Paste
skipit:
Next iSheet
I have a named range, "DDNames", on a master data input sheet and in that range are names of donors. In the same workbook I have sheets that provide a quarterly summary of each of the donors. I have named the sheets "Smry_Miller", as an example. Miller's name is in the named range, as well as others, for the format for each summary sheet is Smry_NAME.
I have a few things I want to do on each sheet so I am working on a FOR loop so I can make my code easily scale-able for when we get new donors or lose one. I get a Run-time error: 9 on my code and I'm just down right stumped.
VB:
Sub MakingLoop()
Dim arrAllDD As Variant
Dim i As Long
Dim varDDNum As Long
varDDNum = Range("DDNames").Count
[Code]...
The debug highlights the line "Sheets("Smry_" & arrAllDD(i)).Range("G1") = arrAllDD(i)"
I need to protect a sheet with following access to users.
1. data can be entered in column a only... rest is automatically updated with formulas
2. users can insert/ hide rows. but can not delete any rows and can not hide/ insert/ delete columns
is it possible to import an excel file into access from an excel form?
without using the access, DO.CMD call?
I need to populate data from Access table to sheet1 using Excel/vba. I want to find out the percentage of batches scanned for the date selected for each time slot. There are Time slots in the columns from Q to X. i.e 8:00,9:00,10:00,11:00.....etc.
so I need to find out percentage of batches scanned before the above time slots.. To count total number of batches , we will use count(BatchNo) function in the SQL query. Because of company restrictions, I can't attach the access database but to give u an idea how the database is stored, I copied the data in sheet2 of the attached workbook. We have to find percentage of batches scanned in sheet1.
I have created a message box but when the Message box window appears
I still wanna be able to access or edit thing in my sheet without closing the message box window.
I know in the UserForm you just have to set the "Show Modal" in the properties window to "False"
But how do I do this with Message Box?
I have multiple worksheets spread across multiple Excel files (1 worksheet per file).
All files are stored in the same folder, and all worksheets have the same column headers and structure. I need a block of code that will combine all of these worksheets into a single worksheet in a master Excel file. That is, the code needs to:
1. Open the first Excel file.
2. Copy the first worksheet's contents into the first worksheet of the master file, beginning at the next empty row it finds.
3. Close the Excel file, and move on to the next file.
4. Repeat.
So in the end, ten worksheets residing on ten different Excel files will be combined into a single worksheet in a single file. No breaks are needed between them, instead, the last row of a worksheet would be followed by the first row of the next one immediately below it. No aggregate functions involved, no sums, nothing like that (which is why I don't think I can use the Consolidate function in Excel).
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
I have an Access table which has following fields:
ScanDate Number DataType
Type Number
Type1 Number
Type2 Number
BatchNo Number
Cases Number
Pages Number
Now I have a useform in Excel so that when the user selects the Date from the combobox then it should check for total batch numbers (Count(BatchNo)), total cases (Sum(Cases)),Total Pages(Sum(Pages)) where ScanDate= Date from the combobox group by Queue Number. The Queue Number consist of Type+Type1+Type2.
See attached the Excelsheet where the data should be populated to. WBCount.xls
