I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1 Name / January / February / March/ Jess________1________0________1 Ryan_______1________1________0 Joe ________1________0________0 ---------------------------------- total P ____3________1_________1 members___3________3_________3 % _______100_______33________33
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E 1 Query: 2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data: A B C D E 1 Fruit Store Cost Mode Date 2 Apple Dominicks 1.99 Bagged 3/16/2014 3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014 4 Banana Jewel 0.49 Bagged 3/1/2014 5 Banana Dominicks 0.57 Ala Carte 3/16/2014 6 Banana Costco 0.69 Ala Carte 3/16/2014 7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014 8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014 9 Eggplant Jewel 0.99 Ala Carte 3/30/2014 10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014 11 Eggplant Costco 1.29 Ala Carte 3/21/2014 12 Eggplant Safeway 0.79 Ala Carte 3/16/2014 13 Pears Jewel 1.19 Ala Carte 3/14/2014 14 Pears Dominicks 1.59 Bagged 3/1/2014 15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014 16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014 17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014 18 Rhubarb Costco 0.89 Ala Carte 3/14/2014 19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014 20 Tomatoes Safeway 1.69 Bagged 3/30/2014 21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab. 1,7 or 8 would go to the lockbox tab. 2 or 5 = IN-HOUSE 3 = WIRES 4 = DATA OCEAN Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
In my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
I want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
I have to create a report that captures the work of 2 different resources on each day of the month, the sheet i am working with has 3 tabs - Main (this houses the main report, with identical fields for each resource), ABC - for details pertaining to work done by the resource ABC ... and a tab called XYZ for details of work performed by XYZ. A resource can work on multiple projects and 3 different modules in one day.
So for each date, i need to bring in the details for columns .. Project Name upto the column # of FB's, for each resource that is for ABC and XYZ.
I have attached a file with sample data, it has the main tab with what it looks like before the data is pulled from the ABC and XYZ tabs ... and what it should like after the required data has been pulled from the ABC and XYZ tabs.
What i am looking for is the formula that i got to enter in the main tab in order to pull the required data from the ABC and XYZ tabs for each date mentioned in each of the columns for each resource (that is ABC and XYZ) in the main tab.
I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments
My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
I get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets. sheet1.jpg sheet2.PNG
I'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
Attached is an example of what I'm trying to do. I've got a master sheet and four sheets, each for a different store. Each store carries the same five items with varying prices. I've set up the master to show the lowest price of each item and have the formula set to display the minimum price. I'd like column D to show the store from which the lowest price came. It can either show the sheet name or display cell A2, as that's the store name on all sheets.
Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.
I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.
The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.
My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.
For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).
[Code] ......
I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.
I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.
