Copying DATA From Main Sheet Into Different Sheets
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab. 1,7 or 8 would go to the lockbox tab. 2 or 5 = IN-HOUSE 3 = WIRES 4 = DATA OCEAN Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E 1 Query: 2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data: A B C D E 1 Fruit Store Cost Mode Date 2 Apple Dominicks 1.99 Bagged 3/16/2014 3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014 4 Banana Jewel 0.49 Bagged 3/1/2014 5 Banana Dominicks 0.57 Ala Carte 3/16/2014 6 Banana Costco 0.69 Ala Carte 3/16/2014 7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014 8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014 9 Eggplant Jewel 0.99 Ala Carte 3/30/2014 10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014 11 Eggplant Costco 1.29 Ala Carte 3/21/2014 12 Eggplant Safeway 0.79 Ala Carte 3/16/2014 13 Pears Jewel 1.19 Ala Carte 3/14/2014 14 Pears Dominicks 1.59 Bagged 3/1/2014 15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014 16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014 17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014 18 Rhubarb Costco 0.89 Ala Carte 3/14/2014 19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014 20 Tomatoes Safeway 1.69 Bagged 3/30/2014 21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
I have a main spreadsheet that lists all the members and profile URLs for members in a forum. In Sheet 1, Column A is the username and Column B is their profile URL.
In sheet 2 I have a list of the members who are in listed in a particular category in the forum. However, I don't have the profile URL data. What I want to do is create a macro that look in Sheet 1 for the username and if profile URL is thier, copies that into sheet 2 next to the appropriate username.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1 Name / January / February / March/ Jess________1________0________1 Ryan_______1________1________0 Joe ________1________0________0 ---------------------------------- total P ____3________1_________1 members___3________3_________3 % _______100_______33________33
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code: Sub ReverseList() Dim Sht As Worksheet For Each Sht In ActiveWorkbook.Worksheets If Sht.Name "MEGA" Then Sht.Select Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
I have a cashflow spread sheet on which there are three properties that are currently being renovated and are being rented out. I would like to see ongoing costs for each individual property on the main spread sheet. I can filter and sort by the properties and autosum to get the individual costings of properties, but I would like to be able to see the costings of each property on the main spread sheet once I have stopped filtering.
I have a workbook with large number of sheets (150+). All sheets have the same column structure (same number of columns with same heading in Row 1), but the sheets vary in the number of rows.
I am looking for a VBA (Macro) that copy (combine) the same range (d2:g6 from each sheet) into a new sheet stacked.
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
i am trying to copy a data from another sheet, and i know to use "=sheetN!XM" but i have already renamed my other sheets, so i cant copy data from renamed cell using this command also by changing the command as the new sheet name...
i have 2 columns of data in multiple worksheets which i wish to copy into one column on another sheet.
i want to be able to click a button and have all the data compile with the item number and serial number into sheet "compile" no matter how many sheets i have (my current macro copys the sheets with a sheet prefix onto it, ive left 31 and 32 there) automatically. Ive edited compile with one sheet of data (note i just copied 31 to 32 - normally all data would be different, not a straight copy) to show what i am trying to achieve. the 17000 will stay the same no matter what, so i just used an IF function there. Basically the part im having issues understanding is how to copy data to the next blank space in the work book, as it wont always be full of data.
At the end of getting this part working i will set it up to automatically compile into a seperate work book as a csv comma delimited to upload to a database for stocktaking purposes - but i just want to get the basic copying working first.
I have two spreadsheets in the same workbook. Sheet1 contains statistics for teams and years. Sheet2 contains a listing of the teams in different orders.
How can I have excel copy a teams stats from Sheet1 to Sheet2 as it goes down the row? For example, A1 is atlanta 1996 so it copies a section of atlanta's 1996 stats to a specific range. Then A2 is detroit 2002 so it copies detroit's 2002 stats, and so on and so forth all the way down the list?
I am a beginner with VBA but I have experience with C/C++. I am just not sure of the functions for excel do all these things automatically and am having trouble finding applicable examples.
Given: 1.Four similar data worksheets (W1, W2, W3, W4).
2.Each worksheet has the same headings in row 1.
3.The data for each worksheet begins in column 2.
4.Each worksheet has an arbitrary different number of rows.
Problem: What code allows you to automatically place the contents of all four data worksheets (W1, W2, W3, W4) into a different worksheet (w5) with only one common heading?
Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
I have a mastersheet with all the information and I want to be able to copy it to new sheets.
The four different sheets I want are: Male-Olympic, Male-Sprint, Women-Olympic, Women-Sprint. Is there anyway to go through the sheet, copy the rows, and paste them into their proper sheet.
