Extract Data From Main Sheet To Other Sheets
Mar 29, 2009
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
View 9 Replies
ADVERTISEMENT
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies
View Related
Jul 25, 2014
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
View 2 Replies
View Related
Apr 29, 2014
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
View 4 Replies
View Related
Apr 17, 2012
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
View 7 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Dec 26, 2013
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
View 4 Replies
View Related
Mar 4, 2014
I want to calculate all datas from everyday of a month in a main sheet which is like;
{=average(if(('(1)'!$C$3:$C$15=C3)*('(1)'!$V$3:$X$15>0);'(1)'!$V$3:$X$15);if(('(2)'!$C$3:$C$15=C3)*('(2)'!$V$3:$X$15>0);'(2)'!$V$3:$X$15))}
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
View 1 Replies
View Related
Aug 14, 2014
Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.
I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.
The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.
My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.
For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).
[Code] ......
I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.
I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.
data_extraction2.xls
View 7 Replies
View Related
Feb 6, 2013
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
View 2 Replies
View Related
Jan 8, 2013
i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
No.
Receive Date
PRF No.
Frank No
[Code].....
View 1 Replies
View Related
May 6, 2014
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
F-S886 (Material Properties Database)_DRAFT_5.xls
View 7 Replies
View Related
Oct 21, 2009
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
View 5 Replies
View Related
Feb 9, 2014
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Dec 14, 2007
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
View 9 Replies
View Related
Sep 23, 2009
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
View 2 Replies
View Related
Aug 6, 2008
I am running into at the moment is that where the Select Case is checking if the sheet name starts with the initials and project number, it doesn't seem to recognise if it is correct (and therefore perform the actions). I have stepped through the code and when I use the immediate window to manually check:
? ws.Name Like "TA0632*"
I get True as an answer, but the code goes on to the next case as though it is false. Here is the code I have so far, which I'm sure can be trimmed down loads:
Option Explicit
Dim currCell As Range
Dim c As Long
Dim r As Long
Dim rng
Dim ws As Worksheet
Dim skp As String
Dim LastColumn As Integer
Sub Breakdown()
Dim t
t = Timer
For Each ws In ThisWorkbook.Sheets
Debug.Print "Current sheet is " & ws.Name
CheckSheet...................
View 2 Replies
View Related
Nov 13, 2012
I wanted to extract the data from the sheets if it match condition.
In the sheet george, data is in the A9: AE500. in the B9:B500, there is date format (mm-yy).
In the H9:AD500, designed as checklist where update as "Y" if or nothing
I wanted to extract the data from this file to sheet Exctract if any of the cell in the H9:H500 not equal to "Y" and B9:B500 of sheet george is less than or equal to D2 of sheet Extract. in the sheet George, some row will be hidden, i wanted to bring the data from hidden rows also.
View 4 Replies
View Related
Mar 1, 2013
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies
View Related
Feb 20, 2014
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
View 14 Replies
View Related
Jul 24, 2014
i want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.
View 3 Replies
View Related
Oct 30, 2006
I am now trying to get the Index worksheet to extract data from the sheets that it has indexed, for example, it returns the sheet name, but i want it also to return the value that is contained in C2 and C3. Is this possible? I have attached the code which i am using below for ease of reference.
Private Sub Worksheet_Activate()
Dim wSheet As Worksheet
Dim l As Long
l = 1
With Me
.Columns(1).ClearContents
.Cells(1, 1) = "INDEX"
.Cells(1, 1).Name = "Index"
End With
For Each wSheet In Worksheets
If wSheet.Name <> Me.Name Then
l = l + 1
With wSheet
.Range("A1").Name = "Start" & wSheet.Index...................................
View 2 Replies
View Related
Aug 14, 2014
In my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
View 2 Replies
View Related
Nov 6, 2009
I created a popup menu when you click the right mouse bhutan .. ok?
Now I would like to access the pop-up Main excel, where you click with the right mouse button and appears Cut, Copy.
then I would like to add a new a item in this pop-up
View 9 Replies
View Related
Jan 25, 2014
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
View 1 Replies
View Related
Dec 13, 2008
I have Sheet 1 that does some calulations and will Output my values e.g.
1X2X
44XX
3XX1
there are also - - - - in the cells for some cells that does not meet my calculations..
So now i have a bunch of - - - - and 1X2X numbers inside sheet1.
Now what i want is to display a Summary of my Cells in the MAIN sheet. just the cells which contains values like 1X2X only.
View 6 Replies
View Related
Jan 24, 2010
I'm looking to do is take the data from "Data" sheet, and have it displayed on "Main" sheet.
I would like to have the total jobs all codes displayed in the "Total MTD" colomn based off the criteria of "Name."
Then I would like to do the same thing, but only total the specific job codes "Code 01" and "Code 02."
I don't want to do a running "30" days, because that will not pull the data I need. I need the data within the current month that the sheet is opened.
View 6 Replies
View Related
Aug 1, 2014
I am trying to write a macro which will extract data stored in columns C,E, F, I, J, P, Q, AC from another excel sheet to "Review Data" sheet when the "extract data" button is clicked on the "Review Data" sheet . However, the location and the name of the file should be supplied by user which will be an excel file.
View 1 Replies
View Related
