This file contains 2 sheet Main M and Detail D.
In Sheet Detail D, When I choose Code, month of Project, it will be shown the result.
By the way, tell me how to delete the Auxiliary column in Main sheet.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI need to write a couple of functions. Firstly I want to do a count on column B (project $) depending on the criteria on column A (project description). For example a total count of all values in col B if project description is "P" or "A". [I can do sumif functions but this is a countif and I cannot get this right].
View 4 Replies View RelatedI have two sheets....one sheet has a all the detail I need on it. On the second sheet I am trying to pull all the detail by category but want to eliminate any zeros in between. Anyone know how to do this?
I feel like I am being very vague so if I need to give more detail just let me know.
Does anyone out there have a macro that will delete all worksheets except for one specific one? In this case I want all worksheets deleted except for one called "MAIN".
View 9 Replies View RelatedI remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View Related[Excel 2003] I have 2 spreadsheets: one to summarize data from a 2nd detail spreadsheet. I'm analyzing work order information for a service operation.
I'm using dynamic name ranges, as follows, for the detail:
WO_Num =OFFSET('WO Tracking Log'!$A6,0,0,COUNT('WO Tracking Log'!$A:$A),1)
Other detail data is defined as these examples show:
GM_X =OFFSET(WO_Num,0,8)
OpenDate =OFFSET(WO_Num,0,1)
All detail data begins in Row 6 in the detail spreadsheet.
In the Summary spreadsheet, it appears to make a difference where my calcs are located in order for my COUNTIF's to work correctly. As long as I keep my summary calc (to total the number of work orders in the detail) in Row 2 of the Summary, it works fine...but if EITHER I move my calc down a row OR if my detail drops down a row because a row was added above (where I have just header info), my summary totals change?!?! I don't understand.
Here are two examples of the calcs I'm using in the summary:
=COUNTIF(WO_Num,">0")
=COUNTIF(GM_X,"X")
Can someone tell me what is going on? What I'm doing wrong?
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies View RelatedI have encountered what seems like a very frustrating and stupid Excel vba bug.
When I use the worksheet.delete method. My vba project is RESET.
All forms object classes and variables disapear into the BIT BUCKET.
In my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
View 2 Replies View RelatedI created a popup menu when you click the right mouse bhutan .. ok?
Now I would like to access the pop-up Main excel, where you click with the right mouse button and appears Cut, Copy.
then I would like to add a new a item in this pop-up
I have Sheet 1 that does some calulations and will Output my values e.g.
1X2X
44XX
3XX1
there are also - - - - in the cells for some cells that does not meet my calculations..
So now i have a bunch of - - - - and 1X2X numbers inside sheet1.
Now what i want is to display a Summary of my Cells in the MAIN sheet. just the cells which contains values like 1X2X only.
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies View RelatedI want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
View 4 Replies View RelatedI want to calculate all datas from everyday of a month in a main sheet which is like;
{=average(if(('(1)'!$C$3:$C$15=C3)*('(1)'!$V$3:$X$15>0);'(1)'!$V$3:$X$15);if(('(2)'!$C$3:$C$15=C3)*('(2)'!$V$3:$X$15>0);'(2)'!$V$3:$X$15))}
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
I have a table of projects with 1) duration in year, 2) time window (number of years of our planning cycle), and 3) start year of the project. I want to generate a list of project parts of all projects where they may take place. This will serve as an input to an optimization program.
So a project of 2-year duration should have 2 parts over any year within the time window. I am including the "impossible" ones for my developer to tag them as "0" when we run it through his code.
My task is to consolidate 4 Excel Project Lists (Workbooks) to a Master Workbook. The Project Lists has a different structure and almost different content. The relevant information is always on Sheet1 but it has completely different ranges. The only constant is the Project Number, which should be used to sort the information. Every Project should be listed only once with all the existing information.
I found a code written by Ron de Bruin which has already some components that I want to have in my VBA but I think there are still a lot of necessary adjustments to do.
Code:
Sub MergeSelectedWorkbooks()
Dim SummarySheet As Worksheet
Dim FolderPath As String
Dim SelectedFiles() As Variant
Dim NRow As Long
Dim FileName As String
Dim NFile As Long
Dim WorkBk As Workbook
[code]....
The Master Project List should has the headers in Row1 and the information listed below. The Macro should automatically places the correct information to the correct column. Some of the information are in 2 or more of the lists but they should be listed only once in the Master List.
Project Number
Project Description
...
1111E.000000001
[code]....
I guess a problem is that the structures of the Lists are quite different so there must be a kind of sorting process.
In the end I want to have an Excel File with the Macro and a Command Button and by clicking the Macro creates a new Workbook with the Master List.
It would be better if there is a variable range instead of a defined. Like the Macro searches the last row and starts at this row and column.
I've been using this code to make menus for all my Excel sheets since NateO made it back in 2003.
- The workbook has 370 sheets, 365 of them are one day per month with the tab named ddmmmyy.
- The Main Menu in this file puts the months Jan, Feb, Mar, etc in cells A3:L3.
- In the single cells under each month it put the month day tab name (ddmmmyy) and hyperlinks it to the sheet tab.
I would like to do two new things.
1. Put the name of the month in everyother cell in row 2, so Jan would be in A2, Feb in C2 and Mar in E2, etc.
2. Put the day of the week for each date in the cell to the right of the date. So the column heading would be Jan in A2, 01Jan08 in A3 and Tue in B3.
I thought I could make another macro and just insert the rows after the Main Menu was built and then VBA copy/paste TEXT(cell,"ddd") down the ranges, but thought there might be a better idea out there...
Sub Workbook_TOC()
Dim ws As Worksheet
Dim wsNw As Worksheet
Dim z As Integer
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
View 7 Replies View RelatedI have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
I am trying to get excel to open a MS Project file and then run a project macro on it.
What is happen is that when I run my code it works, and then excels VBA window freezes up and the run arrow goes away, and if I try to open project I just get a chiming noise and it won't open.
For now I have to select the MS Project file from a directory, but in the future I would like it to go through the folder and open all of the file in the folder
EXCEL CODE
Sub ImportMSProject()
Dim FileToOpen
Dim mpApp As MSProject.Application
Dim prjmacro As Object
'Identify the File to Open - START
FileToOpen = Application.GetOpenFilename("Microsoft Project Files (*.mpp), *.mpp")
If FileToOpen = False Then
Exit Sub
End If
'Identify the File to Open - END
[code].....
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
View 2 Replies View Relatedspliting of main data By column criterias which start from column E1:L1 something like Pivot Table in new worksheet, but based on formula functions.Each worksheets have to based in one of this column D1:K1 headings. That also have to rapidly change with main data table.
View 9 Replies View RelatedI'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
View 4 Replies View RelatedI have tried to record macro to protect VBAProject / lock project for viewing. But can not success by that way.
View 9 Replies View Related
