Entering Data On "Main" Sheet And Sending To Appropriate Sheet
Sep 23, 2009
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
I need to get the data from the sheet 1 added to the sheet 2 by clicking on the ADD DATA button in the sheet 1. The sheet 1 will be filled in multiple times like a form by the users, so once the data is added to the sheet 2 I would like sheet 1 to have no data filled in the column to the right. The data will be only filled in the right column, thus the left column should not be copied to the sheet 2.
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E 1 Query: 2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data: A B C D E 1 Fruit Store Cost Mode Date 2 Apple Dominicks 1.99 Bagged 3/16/2014 3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014 4 Banana Jewel 0.49 Bagged 3/1/2014 5 Banana Dominicks 0.57 Ala Carte 3/16/2014 6 Banana Costco 0.69 Ala Carte 3/16/2014 7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014 8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014 9 Eggplant Jewel 0.99 Ala Carte 3/30/2014 10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014 11 Eggplant Costco 1.29 Ala Carte 3/21/2014 12 Eggplant Safeway 0.79 Ala Carte 3/16/2014 13 Pears Jewel 1.19 Ala Carte 3/14/2014 14 Pears Dominicks 1.59 Bagged 3/1/2014 15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014 16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014 17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014 18 Rhubarb Costco 0.89 Ala Carte 3/14/2014 19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014 20 Tomatoes Safeway 1.69 Bagged 3/30/2014 21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
In my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
I want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1 Name / January / February / March/ Jess________1________0________1 Ryan_______1________1________0 Joe ________1________0________0 ---------------------------------- total P ____3________1_________1 members___3________3_________3 % _______100_______33________33
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available) orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
I am using the code below that I got off of these forums to email a particular sheet in my workbook, but I need to strip all of the VBA code and the command button from the sheet being sent.
