Add Empty Rows And Then Format

May 3, 2012

My frist row of data start at 4:4 but when I run the macro it add a line in underneath this which I would prefer it didn't, again due to my lack of knowledge I placed the following at the end of the macro to hide this row

'ActiveSheet.Rows("5:5").Hidden = True',

I would prefer if this row was not created??

After the macro runs (or during) I would like to have the format changing so the border does not show up between the cells, I would just like an outside broader from a:z columns.

Public Sub My_Insert()
Application.ScreenUpdating = False
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Sort Key1:=Range("A6"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _

[Code] ........

View 2 Replies


Delete Empty Rows And Empty Columns From Word Table

Mar 25, 2014

I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.

Find the attached sample excel sheet and the word documents.


View 2 Replies View Related

Hide Blank/Empty Rows & Shown/Unhide Non Empty Ones

Sep 3, 2006

I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.

View 9 Replies View Related

Deleting Empty Rows / Empty Cells

Sep 27, 2009

I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).

I tried this code but it doesn't delete all rows with empty cells:

View 6 Replies View Related

Code Only Deleting One Empty Row Instead Of All Empty Rows

Jan 22, 2012

I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.

The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.

Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer

[Code] ........

Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.

If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.

View 4 Replies View Related

Remove Empty Rows Based On Range Of Columns If Columns Are All Empty (no Data) Delete

Oct 24, 2012

Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.

Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range


View 1 Replies View Related

Format Empty Cells

May 19, 2006

data is stored in the rota sheet, rota number in coloum B and the name in coloum C the code compares the contents of colum b in rota sheet to coloum B in the other sheets then the name from coloum c in rota sheet is inserted next to the corisponding rota number for the next 7 days. i want the cells in sheet monday tuesday ect to format themselves to yellow if the name is omited in the rota sheet i cant seem to get the code to jump to col when the cell is empty i've highlited in red the parts giving me a problem unfortunatly i cant upload the sheet as its over the size limit

Sub FIND()
WORK = 0
DA = 0
Line = 0
RO = RO + 1
RA = ("B") & RO
ROTA = ActiveCell
ActiveCell.Offset(0, 1).Activate
Name = ActiveCell
If RO = 200 Then Goto Quit
Line = Line + 1
TREE = ("b") & Line
If ActiveCell = ROTA Then Goto NAMED
If Line >= 200 Then GoSub LIST
If DA = 8 Then Goto START
Goto LIN
ActiveCell.Offset(0, 1).Activate
ActiveCell = Name
If Name = ("") Then GoSub COL


Goto GH
Exit Sub
Line = 0
DA = DA + 1
If DA = 1 Then Sheets("SUNDAY").Activate
If DA = 2 Then Sheets("MONDAY").Activate
If DA = 3 Then Sheets("TUESDAY").Activate
If DA = 4 Then Sheets("WEDNESDAY").Activate
If DA = 5 Then Sheets("THURSDAY").Activate
If DA = 6 Then Sheets("FRIDAY").Activate
If DA = 7 Then Sheets("SATURDAY").Activate

View 6 Replies View Related

How To Delete Copied Rows And Update Original Tab Without Empty Rows

Apr 3, 2014

In my excel I'm copying rows upon specific criteria to another tab.

The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)

View 14 Replies View Related

Fill In Empty Rows Below With Data From Rows Above Macro?

Oct 12, 2011

I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?

View 3 Replies View Related

Using A Macro To Paste Format Until An Empty Cell

Nov 27, 2008

I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.

View 5 Replies View Related

Copy Paste Date Value & Format To Next Empty Row

Jan 23, 2008

Is it possible to have a macro copy a range of cells (A1:K1) and place it in the next empty row? My first row has formulas in it to grab information from a separate sheet within the same workbook with special formatting so I can import it to another program. What I want to be able to do is take that first row, use my macro button to copy and paste (only text, not the formulas) the information into row 2, then when the information changes in row 1 with new information (from the other sheet) it will copy and paste the new information into row 3 and so on.

View 6 Replies View Related

Format Column Until Adjacent Cell Is Empty

Apr 24, 2008

I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:

1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.

2. Set Cell "A2"'s value = 1 --> I have already coded this portion.

3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.

4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.

5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............

View 4 Replies View Related

Macro Inserts 3 Rows Below Each Existing Row Of Data And Copies And Pastes That Data Into Each Of The Empty Rows

Nov 30, 2009

need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.

This is what I have so far, but I can't seem to get the loop right.

Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove

activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select

View 5 Replies View Related

Fill The Empty Rows With Value From The Row

Jul 31, 2009

I would like to fill the empty rows with value from the row before them that has a value.

row 1 has a value "a"
and row 2-5 has no values
row 6 has "b"
then row 7 has no value etc...

i would like help getting row 2-5 filled with a, and row 7 filled with b and any subsequent rows that may have a value

View 2 Replies View Related

Removing Empty Rows

Jan 27, 2010

I have a report that I import from a program, but every time I export to excel, it skips lines. What would be the code to remove empty rows from it?

View 2 Replies View Related

Add 4 Blank Rows After Every Non Empty Row

Feb 27, 2014

I was wondering if there is a way to add 4 blank rows after every non empty row.

I dont know how to code. And Im guessing thats the way to do it.

View 5 Replies View Related

Filtering Empty Rows

Nov 3, 2006

i have a table with game results like: ...

View 9 Replies View Related

Removing First Two Empty Rows

Aug 31, 2007

After importing a text file I use a macro to format it, but one part I can't figure out is how to delete the first two empty rows. I need to delete them because the cells in each of these rows are merged together which complicates data manipulation. As you would expect, the row number will be different with each import. Can anyone help with code that would accomplish this?

View 9 Replies View Related

Delete Empty Rows ..

Aug 6, 2008

I Need a macro to delete the empty rows. and the total just after the last row where the data contains. say I have the data from Row 1 to 600 and the total amount in row 1025.

I need a macro to delete the row from 601 to 1024, so that the total amount in 1025 will come in row 601.

I have found the following macro for deleting the empty rows.

Sub DeleteEmptyRows() ....

View 9 Replies View Related

Hiding Of Empty Rows

Apr 26, 2006

How do I go about hiding empty rows in a separate linked sheet? To be more precise, I'm working on 2 sheets now. Sheet 1 would be the input sheet and sheet 2, the output sheet. For instance, there are 10 rows of data in Sheet 1, but out of this 10 rows, I planted data only into 4 rows. How do I ensure that Sheet 2 hides the empty rows (5th - 10th)?

View 2 Replies View Related

Delete Empty Rows ...

Jun 15, 2006

I need help writing a macro for a workbook I am creating. I have a report page that needs to be printed, but depending on the input information, sometimes there are blank rows in between the data. For example A1 may have the value 1, and then A2 is blank but A3 has the value 3. I am trying to write a macro that will delete row 2 (as well as other rows which are blank) and then print the report after all blank rows are removed.

View 9 Replies View Related

Hiding Empty Rows Via VBA Code?

Jul 10, 2014

automatically hiding empty rows on my table... though the table has been referenced via string of formulas which I added up on my worksheet.. Some of the rows on my table are empty and I tried a VBA code on automatically deleting the rows but then I realized that if that certain 'referenced' string of that cell is not empty anymore, that would cause me much trouble.. so basically I need a code that would automatically hide the rows that displays a result of "" and unhides when it is not empty.

View 14 Replies View Related

Removing Empty Rows With A Macro

Oct 10, 2009

I want to create a macro that will cut and paste a worksheet out of an existing workbook and tidy up the table by removing all rows where there is no value in one of the fields (product or part number for example).

View 8 Replies View Related

Removing Empty Rows From Set Of Data?

Jan 24, 2013

removing empty rows from my set of data.

I have a big set of data that I'm copying and pasting into excel. When I paste it there are 2 empty rows between each line of data. I want to remove these empty rows, without affecting the data. I tried 'Go to special...' and deleting all empty cells and stuff but I couldn't get it to work. The problem is that there are blank cells in some of the rows that I want to keep. When I try to remove the blank rows, I also end up removing rows of data that I want to keep.

I've made an example for you to try and explain it better - attached.

remove all of the rows that are completely empty, but leave any row that has any data in it (at any point), that would be awesome!

View 4 Replies View Related

Delete Empty Rows Macro?

Apr 18, 2014

I have a formula that does exactly what I need , it fetches negative stocks from sheet 1 , but the formula places the data exactly on the same row where the negative is , thus there are a lot of in between data not required , Yes I can copy paste special values and remove blank rows , but the macro will do it faster

View 13 Replies View Related

Function To Count Non Empty Rows?

May 23, 2014

I have a workbook with 2 worksheets: summary and data. I added the following function to a module.


Then in summary sheeet in cell A1, I added the following formula:


Data worksheet has only 11 rows but this function returns 1048576 rows! My intention is to get a row count of non-empty cells in column A of Data worksheet.

View 3 Replies View Related

Template - Deleting Empty Rows

Jul 11, 2014

I am creating a template to use at work. One one sheet, I am collecting data from another. Based on some conditions, it will print the value or leave the row blank. This works! But I can not get the empty rows to delete at the end.

View 3 Replies View Related

Select Rows When A Cell Is Not Empty

Oct 30, 2009

I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty

View 5 Replies View Related

Prevent Empty Rows From Printing

Nov 10, 2005

I have formulae in cells to reference another sheet, but if the referenced cell is blank, then the new cell I made blank (using the IF function). The problem is, when I want to print, Excel wants to print all of the cells with entries in them - even the ones with formulae in them that are blank.

Is there any way to prevent the empty cells from printing?

View 11 Replies View Related

Check Rows 1 To 10 For Empty Cell?

Jul 22, 2012

In need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved