Summary Page For Multiple Tabs
Jan 28, 2014I have multiple tabs with information in the same cells on each tab (each tab is a different product). Is there an easy way of pulling this information for each tab onto a summary page?
View 4 RepliesI have multiple tabs with information in the same cells on each tab (each tab is a different product). Is there an easy way of pulling this information for each tab onto a summary page?
View 4 RepliesI have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI have multiple tabs and each tab has an invoice. In the summary tab, I want to grab certain cells ie. Invoice #, Number of items, and total invoice amount.
The tricky part is, although the format for each invoice is the same, the product list for some invoices may be longer in some invoices (which will affect the total amount - aka total amount may be in cell F40 instead of F10).
Since I get these invoices on a regular basis, I would really like to create a macro where it will just find the items I need and paste it in the summary. I have no problems making this file work if the items are all in the same cell and format for each tab.
I have a summary tab in which I am trying to sum data based on specific variables from 30 other tabs in the worksheet
- In the summary tab, I have months (one year worth) over the top row and consultant names in the first column
- Each other tab represents a project
- I want for consultant 1 in summary tab, to have:
For january, the sum of dollars spent in january in each project (so across all tabs)
Same for february to december.
I have attached an exemple Note that the consultant names will always have the same syntax but will not necessarily be in the same cell in each tab.
I am trying to setup a file that has three tabs - LIST, COLOR AND PLANT.
I want to be able to select a color or colors (red, blue, yellow, green) and a plant or plants (tree, shrub, flower, grass) using radio buttons, maybe?
If i chose red and blue for a color and chose tree, shrub and grass for plants, i would like to populate the LIST tab with these items.
I'd also like to give an associated value to each color and plant. for example, for the colors, i could choose values between 1, 2 and 3. if i chose red 1, it would add "red 1" to the LIST. if i wanted to later change it to 3, i could do that on the COLOR tab and the LIST tab would update automatically.
I have a summary sheets for my report that my department no longer wants to use. Rather they want to have a longer, more detailed version of the same thing, but rather than 1 sheet summarizing it all, they want it 1 widget, 1 sheet.
How can I have my Checksheet tab (see upload), turned into multiple tabs. In the specific example I provided, there are 10 widgets, so therefore I created the result in 10 tabs.
How can I get a macro to turn Checksheet tab into the next 10 tabs (see excel upload)?
I have attached the excel sheet of how my summary sheet is, and how it's supposed to look like.
I have a spreadsheet with many tabs in it (over 100 I believe) and I just want a macro that will adjust the page breaks so it will print one page per tab. Somewhere along the way, the page breaks have auto-adjusted themselves to print 4 or more pages on one tab. I do not want that.
In trying to figure this out on my own, I recorded a macro on one of the tabs and it returned the following
Sub Macro1()
ActiveWindow.View = xlPageBreakPreview
ActiveSheet.VPageBreaks(1).DragOff Direction:=xlToRight, RegionIndex:=1
ActiveWindow.View = xlNormalView
End Sub
How can I add to or adjust this to make it adjust the pagebreaks in all available tabs?
I am currently working through a macro and got stuck about halfway. I have a number of files in a folder on my drive that I am pulling the first tab from into a Master workbook, and then I want to have a summary tab for all of those tabs(they are all identical). Some of the cells will be text(say range A5:C105), some will be SUM(E6:G105) and some will be AVERAGE(D6:D104) formulas needed. These formulas will not change, but will need to pull the data from all tabs that are pulled into the file.
So far I have this code that pulls all of the first tabs together:
Code:
Sub Staff_Plan_Update()
Dim wbDst As Workbook
Dim wbSrc As Workbook
Dim wsSrc As Worksheet
Dim MyPath As String
Dim strFilename As String
Call TimeStamp
[Code] ......
I was going to record a macro that creates a summary table every time, but not sure if it is easier to create a blank template for the summary tab that will update every time all of the tabs are pulled into this file. The problem I ran across with that is that I will be taking the SUM of all tabs, but the number of tabs/name of tabs will be different.
I have a workbook with multiple calendar sheets in it, those sheets are names by the staff member name (attendance calendar). We put the value 'H' or 'S' in the cells to indicate whether an employee is on holiday or sick. I would like to create a summary calendar/dashboard that shows which people are off which days, like a summary or another calendar with names in date cells. I have tried various ways, but cant seem to return the value I want, or find a simpler way of doing it.
View 7 Replies View RelatedI have created an orderform in excel. it is 8 pages and has a numerous amount of products on it. i want to make a 9th page that is an order summary page.
I want to be able to have the customer put quantites in the spreadsheet and then that item, id code, and quantity will display on the 9th page.
here i my file
I have a macro that takes data in rows 1 through 500 from many tabs and collects them in the summary tab.
I would like to write a macro that only selects rows that have data in Column A. Therefore, reducing the number of rows copied from all tabs from 500 to only a few that contain data that I really need.
This is what i currently have:
[Code] .........
I have a worksheet that contains 26 tabs all of which have the same format but contain different data based on that pay period. i would like to create a summary tab which will allow me to enter the pay period at the top (1,2,3 ect) and have excel reference that tabs information into the summary. Is this possible?
View 6 Replies View RelatedI'm trying to make a task tracking spreadsheet. Each part (or project) that I'm working on has it's own sheet. On those sheets, in a specified column (let's say column A for now) I would like to add a tag or date that I can use to create a summary sheet. The summary sheet would have a macro that looks through each sheet in the file and if the value of the tag matches a specified value, the summary sheet would be populated with everything in each row that has that value for the tag.
View 4 Replies View RelatedI am working on creating a summary page for my workbook. I want the code to create a destination sheet called Summary, then look at each sheet in the workbook, check for a value >0 in cell N7, if it is >0, the copy the tab name and the value in N7 and paste it into the destination sheet starting in cell A1(text of source tab name) and B1(dollar amount). Then move to the next sheet in the workbook and copy paste if N7 is >0 sheet name and value. It needs to skip the sheet XMOE. The Summary sheet would then create a dollar amount subtotal of the values copied from the sheets and populate it into Cell D1. Cell C1 would state "Workbook Subtotal"
I would like the code to delete any sheet where N7 = 0.
I am looking to create a summary page to show open items within a log of initiatives. The workbook has 21 different tabs logging initiatives by the each individual person and also 9 other data tabs. On the tabs containing the initiative logs, it states whether the initiative is open or closed and I only want the summary tab to show the open items. Is it possible to do this?
View 1 Replies View RelatedI have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
View 2 Replies View RelatedI have had a TREMENDOUS amount of assistance from a true gentleman, Jaslake; aka John. In an attempt to quite monopolizing his time I wanted to throw this at the board. I have a number of sub sheets with exact ranges of (B4,d4:b44, D44) update an individual cell (H6:H86) in the” summary” page. My attachment explains it in detail but currently I will show you the formula that resides in (H6) of "Summary". (H6) = Sheet "1". This formula only covers (B4,D4:B10,D10) for example purposes but I need it to run all the way through (B4,d4:b44, D44) for all 80 sheets.
=('1'!B4) & "-" & ('1'!D4) & " | " & ('1'!B5) & "-" & ('1'!D5) & "|" & ('1'!B6) & " - " & ('1'!D6) & "|" & ('1'!B7) & "-" & ('1'!D7) & " | " & ('1'!B8) & "-" & ('1'!D8) & "|" & ('1'!B9) & " - " & ('1'!D9) & "|" & ('1'!B10) & " - " & ('1'!D10).
Results look like this:
March 01, 2009-Today looks good | March 02, 2009-Today looks bad|March 03, 2009 - Today we had issues in Boston|March 04, 2009-Issues in Dallas | March 05, 2009-Issues In New York|March 06, 2009 - New York is complete|March 07, 2009 - Dallas is Complete
NOW, with this said what I really would like to happen, if it is possible, is to have the "Summary" (H6) only have the last range that has been updated showing. So if currently B4,D4 is showing in (H6) once the user types into B5,D5 then it replaces B4:D4. I would like this action to repeat itself until the user has completed their event. The reason I can not stick with a formula in (H6:H86) is because I have a macro running a copy.paste, then clear.contents once a selection is made in Column 4. The information must remain on the sub-sheets but it can be replaced in “Summary “. “Summary” is only a quick view of the current status while the sub sheets are a log of all the work done. So, the following
I have a workbook with 5 work sheets. The first one is summary page. Can I make the Name on the tabs of the 2-5 worksheets appear on the first sheet in cells without actually typing them. I want it to be automatic like when I paste a link to a cell in another worksheet.
View 9 Replies View RelatedI have a worksheet that has two different years and I am trying to update a summary page that pulls the amount based on the year in the following formula.
View 5 Replies View RelatedI am currently pulling information from a database into Excel. In column A is a list of dates that vary depending on how many days I decide to pull. On any given day there are options to which car will be driven and it is random and there are attributes associated with that drive such as below. If the car was not driven the data pull inputs "No Data" or a "0". On any given day up to three cars can be driven but it is still possible that only one will be driven. This is shown in the second table below. I'd like to be able to create an automated summary table such as the first table below. The summary table should be organized by date and show what cars were driven and their attributes. I know this seems simple but in reality I have six different cars and up to 10 attributes for each car and will be pulling months at a time. The only thought I have had is to do a for loop that checks every individual cell but I am not sure how to implement that.
Car
Miles
MPG
Car
Miles
MPG
Car
Miles
MPG
[Code] .....
I have multiple tabs for each month (Jan, Feb, etc) for the 2008 year and I have a Summary tab.
For the individual months, I have each calendar day in a column and whether the day was for sick, vacation, etc in the rows. So if someone was sick in April, I would mark the day they were out of the office. And so on...
Well now I need to figure out how I can take those individual dates and total them up in the summary page automatically.
I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.
I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.
So I should end up with a sheet for each page and allthe data sorted correctly?
I am creating a summary page that shows product levels for each org. The summary page looks something like this.
ORG 863869880
Warehouse SubWHS1WHSWHS
Part NumberQTYQTYQTY
122796
143091
147388
118494
And the data source looks like this
ORGPartSubQty
863122796WHS1420
863143091WHS115
863147388WHS185
863118494WHS160
863122796VAN033
863118494VAN021
869122796WHS180..........................
I've been trying to return the qty based on the ORG and SUB using an INDEX MATCH function but it keeps giving me a #NA error. Here's the logic behind what I'm trying to do. Return Value (QTY)of part # X if ORG = B and SUB = C (in this case WHS). Here's my Formula
=INDEX(Data!$D$2:$D$43,MATCH(Summary!B$1,IF(AND(Data!$B$2:$B$43=Summary!$A4,Data!$C$2:$C$43="WHS1"), Data!$A$2:$A$43),0))
This is an array formula so I have confirmed with CTRL+SHIFT+ENTER to designate as such.
I am creating a workbook and need the user to stay on a single page of the workbook until certain circumstances have been met, specifically, a macro has been activated, thus confirming that certain data is now in place. Is there a code of function that I can introduce into the workbook so that clicking on the other tabs of the other sheets will not allow the user to leave the page they are on until that circumstance is met?
View 9 Replies View RelatedI have created the bulk of the worksheet, and I am now on the summary page. My challenge for the summary is looking up when someone's name appears in Column A on any of the sheets, then summing the hours per week that the person worked.
The main sheets are to track hours, and billable dollars per project, but the summary is to track total hours per team member per week to make sure staff is being full utilized.
In the examples I have attached Aaron's summary should have 13 hrs per week listed. I do not have the foggiest clue how to do a lookup on a name when the position and sheet is random, and return a value summed for each week.
On the summary sheet I did copy rows 1&2 so at least the summary columns match the sheets.
Example 1 is a sample of the detail on 1 of the 5 sheets that in this example could contain Aaron's name in any random place in column A. Example 2 is my hope for the summary page, that will sum those random hours per week matching the headers on the Detailed sheets.
I have produced a table of contents using the following suggested code:- [URL] .....
Is there a way of getting the contents page to exclude the first three tabs of the work book.
At the moment my table of contents is including the cover sheet and table of contents.
I am interested in printing an entire workbook in one shot with multiple tabs, where each tab is one page. I would like to print the tabs such that the first tab has the number '1' in the footer, the second tab has '2' etc. And I don't want to go into each tab and type the number in the footer.
Does anyone know how to easily make this happen?
If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.
macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...
NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View Related