I am an avid greyhound racing fanatic and I would like excel to sound an alarm when a race is due. I have entered all the race times down one column A1-A146 in this format 08:33, 08:37 etc
Is there a way to get excel to use the system clock and check these times and sound an alarm 1 minute before the the time I have entered, i.e. 08:32, 08:37 as in the above examples?
I'd like to be able to show a messagebox of some sort (or any type of visual alert) plus display an audible alarm (or wav file) when a formula condition is met in a certain cell. Is this possible?
View 14 Replies View RelatedI need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
I wanted to set the time alarm in a cell , is that possible in Excel .
View 9 Replies View RelatedI have a training list file i made in excel that I put what people are trained on, the date they were trained and automatically it adds 2 years to the next column for when they need training again.
What I would like to do is make a macro, that will pop up a box (upon opening the .xls file) that states any of the employee who are due to be retrained, as well as what items they need retraining on.
Can excel be made to play an alarm if a condition becomes true?
View 5 Replies View RelatedCells in Columns A & B (57 rows deep) have a real time data feed and can have values of blank, "H", or "R". The H and R can remain in the cell for any length of time. I would like to have an audible ding go off whenever a new H or R appears in columns A or B. Is there a cell formula that can do this? I think a macro solution would not work, because the workbook has a macro that activates every 10 seconds, so I assume a macro solution would interfere if both macros happen to activate at the same time.
View 9 Replies View RelatedIn the attached sheet I want TR no. in sheet names TLPL using 2 criteria of truck no. and date.
View 7 Replies View Related1
A
B
C
D
[Code].....
Not sure what is the best way to explain this- basically I need Name 1, 2, 3 to select the names from [B2 to F2], excluding the name that matches with B4 (because that is a variable).
For example, Name 1, 2 and 3 should be John, Mila or Paul (in any order).
And when B4 is changed to John, Name 1, 2 and 3 should be Amy, Mila and Paul.
I am having trouble using vlookup and offset to arrive at a solution. I have a row a 5 formula based items. For example:
C 1 2 3 4
1 C 2 3 4
1 2 C 3 4
1 2 3 C 4
1 2 3 4 C
I have been using the match function to find the location of C, but I want to output the items in the same row as C, in the order they appear if C was removed.
I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
I have fixed data:
Michael = Resident
Joan = Intern
Patricia = Consultant
James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?
I have a spreadsheet with around 1000 rows on data. in each row of data there is a number e.g. 2673 (all in their own cells) so in column A you would have a list of just numbers in another workbook, the number thats in each row corresponds to another value e.g. 2673 = CE103. So this workbook has 2 columns. In column "A" you have the numbers(2673) and in column "B" you have what that number matches with (CE103) i need a way of replacing all the numbers with what they equal
Workbook 1
A B C
2673 XXX XXX
513 XXX XXX
5107 XXX XXX
604 XXX XXX
Workbook 2
A B
2673 CE107
513 CDR57
5107 QV906
604 MNT57
There is an example of what i have (hope its understandable) and what i need is, the data from workbook 2 put in to workbook 1. So instead of having 2673 in workbook1, i would have CE107. And the same for the others e.g 513 would be CDR57.
I'm working on a project requiring the matching of data from multiple worksheets and got some useful advice from someone on here a few months ago to get it up and running.
At the moment I'm using SUMPRODUCT with an IF argument to check rows on one sheet for matches on 5 others and return a "Yes" or "No" value, which is working fine. The next bit of analysis however requires copying the value from another column on rows that match, and pasting it into the first sheet.
I have a report that has thousands of lines... debits & credits. Most of them offset one another, 0 balance. However, there are still many w/ missing credits that need to be identied. Instead of going thru 10,000+ lines to pull out lines w/o credits - Is there a way that I can cross check the amount between lines (1&2, 2&3, 3&4 etc etc) and if their total is 0 then I want to move them to another sheet (Matched)?
View 6 Replies View RelatedI'm trying to write some VB code that will call up a sound file each time I give a new cell focus.
Example:
Cell A1 holds value "Hello"
I'm trying to write code that calls a sound clip I've recorded that says "Hello" when I select A1
Any suggestions?
How can I silence the annoying beep heard whenever a msgbox pops up or an error box appears?
View 9 Replies View RelatedThis is what I have,
Private Declare Function PlaySound Lib "winmm.dll" _
Alias "PlaySoundA" (ByVal lpszName As String, _
ByVal hModule As Long, ByVal dwFlags As Long) As Long
Const SND_SYNC = &H0
Const SND_ASYNC = &H1
Const SND_FILENAME = &H20000
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If UCase(ActiveSheet.Range("S41").Value) > 99 Then
FName = "C:windowsmediading.wav"
Call PlaySound(FName, 0&, SND_ASYNC Or SND_FILENAME)
End If
End Sub
but I cant get it to work!
All I want is for it to play a sound when My Value in S41 goes over the Value 99
the value is part of a simple formula of sums.
is there anyway of playing a sound once a user opens my excel file???
View 3 Replies View RelatedI have made a standard Demo Workbook for testing Wav file VBA in this case.
It shows the problem code and a series of counters.
When the RED macro button is pressed, it should show the error code. and below a brief explanation.
I don't think it is an actual error as such, but I ask for an alteration. Once the code is solved, the GREEN button should work. If the demo book is downloaded it will explain better.
I was able to use the IF function to match all of the sells in each work sheet but have been unable to figure out how to pull the SYSTEM# from each MASTER into the inventory sheet matching the CCSD row D.
I was able to figure out how to add the IF function to the individual worksheets but I have no idea what function would pull the SYSTEM# from the matching MASTER worksheet.
I'm attaching working document I have so far I was able to use the count function to add up quantities and the conditional format to set up the formats.
I've tried searching for an answer all over with out success. Here's my dilemma. I've got two columns (A and B) with over 1000 entries in each column with computer names. Most of the names are the same however some differ in the way that they might be in column A and not in column B and vice versa. What I would like to achieve is to compare those two columns and display the result in column C and D but keep the names of the in the retrospective column.
What I mean by that is that if a name was found in A but not in B I would like to have it displayed in column D and vice versa. If a name is found in B but not in A, to have it displayed in column C. If there is an easier of doing this, please by all means (i.e. highlight the name in A if missing in B and vice versa).
I have a table with names in column 1 and the date as row 1. The corresponding cells contain the data I want to link to in another sheet and display them by the data/date
Ex,
Name 01-Sep02-Sep03-Sep
bob A1 A1 "blank"
joe A2 "blank" A2
steve A3 A3 A3
I want it to display in another sheet with column 1 data and row 1 as date if the data has a match versus that date;
01-Sep02-Sep03-Sep
A1X X
A2X X
A3X X X
The data is in list boxes.
I have 2 Data Lists, want to make compare and sort as matched values.
So, I need to find a solution with a formula or maybe Macro.(Formula is preferred)
At the attached file you will find the detail : CompareList&Order.xlsx
Macro is not working .So the macro I am using is supposed to look back at all the months tab, match the Name from previous tabs and if they match change background color of the active sheet's cell to red.
Right now the macro is only able to lookup the name in the previous tab (i.e. For December it will only lookup November tab and not October-January).
e.g. (Candidate name is Jack King and he is in (october's tab, Column A Cell 2 )
I want this candidate name to turn red once I type his name in November/December tab.
I have pasted the code I am using below:
[Code] ......
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
A B C D E F
xxx xxxx xxx 123 123
xxx xxxx xxx 123A 123B
xxx xxxx xxx 123B 123C
Is it possible to leave column A, B, C, D untouched and match against column E from column D?
If E matches D then leave in the same row and if E does not match D then move to column F? The identical numbers may be included in the columns, but different rows.
I have a set of transactions from one system which is column D and I have another set of transactions from another system which may or may not have the same transaction from column D. They are all sorted from + to -. I just need to match up cells from column E to column D.
This may be out of the realm, but is there a way I can have a cell(s) with text in it change to another color?
To be a little clearer. Cell H3 (but i have a small formula in cell h3) has 9 and cell A4 has the same value (9) (or number or value etc..)
i would to color red for H3 if it find matches in range A4:F4
like this:
Macro that cut entire row to new sheet if cell data is matched.
For example,
Column A Column E
001 AAA
002 BBB
003 CCC
004 AAA
005 CCC
006 DDD
From sheet 1, A & C matched criteria, cut entire row and paste in new sheet with same header.
I have 3 times series data in excel (returns on stock, market return and risk free return), each has their own date corresponding to its return, so 6 columns all up.
Imagine it like this:
Date | Stock Return -- Date | Market Return -- Date | Risk Free Return
The problem is that the 3rd data set (risk free return), its date column mismatch the dates column of the first two (returns on stock and market). So the obviously solution is to basically get the third time series data to only show the same dates as the first two.
I want to use the first two data sets date's as like a benchmark for the third data set to only show those dates.
I have tried filter/advanced filter in Excel 2007 and spent ages on google/youtube but no luck; it wont let me try to match specific cells to filter out dates from a specific series of cells.