I have a chart that gets updated to show the desired reporting period by clicking a button to run some code which applies filtering to the source worksheet using a value selected from a drop down validation list on the chart worksheet. When the code runs, the source worksheet displays temporarily. How do I prevent this switching back and forth between the data and chart worksheets during code execution? Undoubtedly, there is a better way to code this.
Application.DisplayAlerts = False
wk = Worksheets("Charts"). Range("D63")
With Worksheets("Leak Data")
.AutoFilterMode = False
Selection.AutoFilter Field:=2, Criteria1:=wk
Selection.AutoFilter Field:=11, Criteria1:=">5000", Operator:=xlAnd
Application.DisplayAlerts = False
My excel file has a column for customer name (there are more columns btw). I have the filter feature on. The customer list is in column F.
I recorded a macro by copying a customer (from the customer column, say from cell F99). Then I click on the filter arrow and select the 'custom' option and in the dialog box that comes up, I paste the copied customer and try to find other records which have the same customer name.
This works great but when I run the macro for some other customer, say from cell F200, the pasting part, pastes the customer that I had selected when recording the macro.
Is there a solution to make this generic so that the macro will work in a manner that I simply highlight the cell of the desired customer and then then run the macro which will give me the result.
Thats the best I could describe that What I face today is the means to run a VBA Autofilter from an Activecell. The Activecell is a search result. I have a table that spans from A1 to E5000. The Activecell will always be in Column A. What I need to happen in when the Activecell is found an Autofilter is placed in the block of data from Column B to E. The rows will change after every search hence my dilemma. Each block of data has its own header as well
So if my Activecell is A2 then I need B1:E4 Autofiltered then Column E sorted Smallest value to Largest. The Activecell needs to remain static. The size of the blocks of data are exactly the same.
Here is a photo example of the desired result. Untitled.jpg
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
Is it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
is there any way to get an advanced filter to play with autofilters? at the moment after i have applied the advanced filter it completly messes up with my autofilter to the extent that it moves where the autofilter actually sits and then when i try and use the autofilter it completly ignores the advanced filter i just applied. how to make the 2 filters play nice together and actually be able to autofilter the results of an advanced filter.?
I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
I'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?
I used the "record macro" and went through my data manipulation steps. But its not transferable to other worksheets because it imbedding the name of the worksheet in the some functions (sort, pivottable,...). How can I change the name of the worksheet to "activeworksheet"?
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code: Option Explicit '>> 'This example will copy the filter results below the existing data on the destination sheet. 'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook. 'This example will not copy the header row each time so when you manual add the worksheet '"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows... I want to autofilter Waiting list column I for the value of "Yes" Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I've been a somewhat casual Excel user and now need to do some VBA with a workbook that has several worksheets in it. In particular, the workbook has sheets that have been added "out of order", that is, the leftmost sheet is not the first one added to the book.
I need to write a VBA routine that looks "backward" from the current worksheet to "previous" sheets, i.e., sheets to the left of the current worksheet, but not to the right, so I can't refer to them as Sheet1, Sheet2, etc. and they actual display names that are not of that form anyway. I am aware of the "Worksheets" collection and the fact that I can "subscript" that to refer to the sheets in a left-to-right form.
I know that I can refer to the current sheet as "ActiveSheet" and I can determine properties like its name with "ActiveSheet.Name", but is it possible to find its index in the Worksheets collection? I'm looking for a function or property such that "ActiveSheet.Index" will allow me to refer to it as "Worksheets(Index)" and particularly to allow me to refer to preceding sheets as, e.g., "Worksheets(Index-1)".
If worse comes to worst, I can always cycle through the worksheets and check the name of each worksheet like this:
Sub Button1_Click() Dim index As Integer Dim strASName As String strASName = ActiveSheet.Name index = 0 Do index = index + 1 Loop Until Worksheets(index).Name = strASName MsgBox "Index of current worksheet is " & index End Sub
And while I'm at it, is it possible in Excel to rename a control like "Button1" to something more sensible and mnemonic, like "btnRecalculate" or whatever?
I've created drop-down lists in cells B3 and B4 (this is in worksheet 1), based on a column in Worksheet 2. I'd like Worksheet 2 to autofilter the data based on the drop-downs in B3 or B4, or both together.
Using VBA, I am trying (without success) to copy the active worksheet of my workbook and save it in the current folder using a filename shown in cell A1. I only need to save values and formats. Any existing code (auto fit) contained withing the sheet would no longer be required. I get a VB project message relating to macros. I would anticipate saving as xlsx would deal with this but again, am at a loss.
Say i have a Worksheet named "gateway" or sometimes it will be "gateway (2)" (3) and so on. Is there a macro that i can call that in some ways calls the active worksheet and renames it to just "gateway" everytime?
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
Replace specific text within a defined range without having to select the sheet. I tried the following but this is obviously not the way to go.
Sub Open_Calls_Rename_Organizations() With Sheets("Open Calls").Range("Organizations") Cells.Replace What:="Institute Technology Code", Replacement:="ITC", LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False End With End Sub