I use VBA to create a workbook that has 6 worksheets. All six sheets are identicle in format. Only the data is different. I'm trying to AutoFilter all the sheets. Here's my code...
For Each s In WB_Report.Worksheets
s. Range("B7:R7").AutoFilter
Next s
This is the very last instruction of my macro. For some reason, it's only applying an AutoFilter to 3 of the 6 worksheets.
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
Is it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View Relatedis there any way to get an advanced filter to play with autofilters? at the moment after i have applied the advanced filter it completly messes up with my autofilter to the extent that it moves where the autofilter actually sits and then when i try and use the autofilter it completly ignores the advanced filter i just applied. how to make the 2 filters play nice together and actually be able to autofilter the results of an advanced filter.?
View 2 Replies View RelatedI have a chart that gets updated to show the desired reporting period by clicking a button to run some code which applies filtering to the source worksheet using a value selected from a drop down validation list on the chart worksheet. When the code runs, the source worksheet displays temporarily. How do I prevent this switching back and forth between the data and chart worksheets during code execution? Undoubtedly, there is a better way to code this.
Sub Chart_FilterPPM()
Application.DisplayAlerts = False
wk = Worksheets("Charts"). Range("D63")
Worksheets("Leak Data").Activate
With Worksheets("Leak Data")
.AutoFilterMode = False
.Range("Headings_LeakData").AutoFilter
End With
With Range("Headings_LeakData").AutoFilter
Selection.AutoFilter Field:=2, Criteria1:=wk
Selection.AutoFilter Field:=11, Criteria1:=">5000", Operator:=xlAnd
End With
Worksheets("Charts").Activate
Application.DisplayAlerts = False
End Sub
I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
View 3 Replies View RelatedI'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?
View 9 Replies View RelatedIs there by any chance a work around for using a multiple auto filters on one worksheet using combo boxes ? An exmple of dummy data is :
Sales Rep<-filter here
Paul500
John600
Tom900
Andy450
Mark300
Sales by Region<-and here
North120
South360
East480
West490
North East250
North West500
South West290
South East260
Can I validate data based on a list in another workbook? is what I mean to say.
View 2 Replies View RelatedI got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows...
I want to autofilter Waiting list column I for the value of "Yes"
Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I've created drop-down lists in cells B3 and B4 (this is in worksheet 1), based on a column in Worksheet 2. I'd like Worksheet 2 to autofilter the data based on the drop-downs in B3 or B4, or both together.
View 2 Replies View RelatedIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I have a sheet that is password protected. I have this code attached to a command button. It will unlock the worksheet, autofilter it, print it, unfilter it, and password protect the sheet again. However it is protecting it without a password. I need to have it protected with the password so that someone will not be able to just go to tools to unprotect the sheet.
Private Sub CommandButton1_Click()
ActiveSheet.Unprotect "rainforest"
Columns("O:O").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:=">0", Operator:=xlAnd
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1
Selection.AutoFilter
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowSorting:=True, AllowFiltering:=True
End Sub
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
auto filter options in excel. For some reason it is only sorting up to row 140.
View 14 Replies View RelatedSay you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.
View 10 Replies View RelatedI have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.
For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.
Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.
So far, no good luck..
The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?
i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.
Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?
I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.
I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedCode runs rather slow. Is there a better way to achieve the same results?
View 5 Replies View RelatedI have a workbook of approx. 60,000 rows, with about 20 columns including a source identity column, such as 'Leeds' , 'Barnet' etc..
What i need is a solution that will auto filter all rows that have a value of 'Leeds' in the source column into a new workbook called 'leeds.xls' for eg. and so on (for each unique source value) and loop until the whole data set has been filtered.
Saves manually filtering, copying and pasting....over and over.....
Im guessing the VBA needs to build / look at an array etc...
This macro was working just fine, now it generates an error on the line in red.
View 2 Replies View RelatedI have an spead sheet with 9 sheets 1 master and 8 sub sheets. The master sheet runs for col A to AV and the it can have x amount of rows. At the moment i use the following but this takes an age.
View 9 Replies View RelatedThe attached file has two sheets, “order” sheet and “stock” sheet. Can some help me with the followings:
1-In either sheet, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, the VBA performs an Auofilter of the cell I have selected.
2-In sheet “Orders”, I would like a VBA where if I put the mouse on a cell and then click the VBA button it takes me to sheet “stock” and performs a find function of the cell I choose in sheet “orders”. For examples, if I put the mouse on cell E21 in sheet “orders” and press the VBA button, it takes me to cell H297 in sheet “stock”.
3-In sheet “stock”, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, it takes me to sheet “orders” and performs an Auofilter of the cell I choose in sheet “stock”