I'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?
View 9 Replies
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I have a large table which I am filtering 3 times. There should be results but the final VBA filter does not return them until I manually apply the filter. The custom filter is correctly populated with the criteria. The code that I am using is as follows:
VB:
Cells.Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="<>", Operator:=xlAnd
Selection.AutoFilter Field:=10, Criteria1:="=INV", Operator:=xlOr, Criteria2:="=CRD"
Selection.AutoFilter Field:=21, Criteria1:=">=" & DTPicker1.Value, Operator:=xlAnd
The first two filters work fine. The last does not. Oddly it works on some date picker values and not others, even if there are actual results and as mentioned earlier if I stop the program running and apply the filter (without typing anything else) it works fine.
I want to use the selection from a combobox on a sheet to set the autofilter. I know it is probably very simple but have not been able to find the answer by searching this forum. Below is the code I am using. It sets the filter to blanks for some reason.
Private Sub ComboBox2_Change()
Range("D9").AutoFilter Field:=1, Criteria1:=ComboBox2.Value, visibledropdown:=False
End Sub
I have a worksheet of data that I have created by combining several other workbooks into one using a macro. On this worksheet I run AutoFilter to select certain rows and then copy these rows to another worksheet, again using a macro. How can I get the macro to generate a total for one of the columns? I would like the Sum to be two rows after the end of the column with some kind of descriptor preceeding it.
View 6 Replies View RelatedI have a list of data in Excel with Autofilters. At the bottom of the data set is a row that totals up many of the columns. Whenever I use the Autofilters, the totals at the bottom still reflect the entire set of data, rather than only the filtered data.
Is there a way (using macros, formulas, or something else) to make the totals automatically update to only reflect the data that is visible when using Autofilters?
I have a problem very similar to this thread: [URL] .... Therefore I have tried to adapt but so far failed.
My requirement is that a userform pops up with multiple comboboxes (in this scenario 3) and once the results have been selected and the user clicks the button "OK" then the autofilter changes to the same as what the selected ComboBoxes were.
So, there are 3 comboboxes so I have tried the following:
VB:
[PrivateSub CommandButton1_Click()
Worksheets("Data").Activate
If Sheets("Data").AutoFilterMode = True Then Range("B3", Range("B600").End(xlUp)).AutoFilter
Range("B3", Range("B600").End(xlUp)).AutoFilter Field:=1, Criteria1:=ComboBox1.Value, visibledropdown:=False
[Code] .....
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
I want a msgbox to popup if the autofilter returns no records saying "No records found".
Heres a sample of the
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rfilter As Range 'range to search
Set rfilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rfilter.AutoFilter Field:=1, Criteria1:=strFind & "*"..........
The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.
Sub AUTOFILTER_withouthead()
' AUTOFILTER_for_drop Macro
' Macro recorded 1/27/2008 by DD
Dim ws As Worksheet, wd As Variant
Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value))
Set wd = Worksheets("Destination").Range("A1:F65000") ...
I have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.
I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough
The code is:
Sub GetWorksheet()
Dim filetoopen As String
Dim wb As Workbook
filetoopen = Application _
. GetOpenFilename("XL Files (*.xls), *.xls")
On Error Resume Next
I am performing an autofilter within a spreadsheet to display only those lines where a name exists in column A. Then I delete all hidden rows. I am having a problem when the autofilter results in no rows being visible. Here is the code I am using for the delete hidden rows:
On Error Resume Next ' In case there's no hidden cells
With Cells
Set rngHidden = .SpecialCells(xlCellTypeVisible)
.EntireRow.Hidden = False 'Unhide all cells
rngHidden.EntireRow.Hidden = True 'Hide previously visible cells
.SpecialCells(xlCellTypeVisible).EntireRow.Delete 'Delete previously hidden cells
rngHidden.EntireRow.Hidden = False ' Unhide previously visible cells
End With
End Sub
I am working on a file with different users entering information on different sheets (tracking the status of individual projects and activities). Using the macro below (which I found in the forums), the individual data will be combined on a master sheet. My problem is that some of the users will be using autofilters to filter their own data (for example--filtering to show only the "Open" projects). When I do the copy of the individual data, I want ALL of the data, not just the data that is being shown by the individual filter settings.
At first, I just turned the individual filters off before copying the data. The other users have asked if there is a way around this or alternatively, restore the filter values after the copy.
A key point, there are currently 8 user sheets. Each user is allowed to set their own filters and change them at will-e.g. one day, a user may filter on projects due in Q3, another day she may be looking at all projects closed in 2013.
VB:
Sheets("Combined").Select
ActiveWindow.SelectedSheets.Delete
Dim J As Integer
On Error Resume Next
[Code] .....
I have a file where I have few sheets (link to file below). Sheet zrzut is dropdown from other system - updated daily. Sheet Productivity is filled with data supporting to group data and add conditions (for example column "I" in "zrzut" sheet). Sheet "Vena" has data from "zrzut" based on condition in column "I". Sheet "VENA_PLAN" has the same data as "Vena" but only values - I need only values for other actions. The thing is my current code replaces old data with new, but what I would like to achieve is to have new data stored below old. For now code looks like
Code:
Sub PlanVENA()
Application.ScreenUpdating = False
Worksheets("VENA_PLAN").Range("A3:H300").Value =
[Code]....
what i have is a workbook with 4 worksheets. each is a list of tapes that i use for back ups.
each worksheet has a auto filter so that i can filter by the day i need to use the tape. i.e. when i select monday it displays mondays tapes only.
what i want to do is take the result from this and copy it into another sheet so when i select tuesday it copys onto a 5th sheet in a specific area.
i would also like it to change the day on all sheets filters from a single drop down. i cant put everything on one sheet as there are duplicate tapes and days.
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
View 4 Replies View RelatedI have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I have a work sheet with about 35,000 lines of data. Every day I have to sort the list by product category (I use auto filter to separate) and then copy the results into a new worksheet, there are about 300 product catagories. I'm new to macros but I'm wondering if there is a macro that can automate this process.
View 6 Replies View RelatedI want the following script to:
1) Find and define a range ("DateRng") based on cell values. This is controlled by the first block and the script does this job correctly.
2) Find cells
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
Is it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View RelatedI use VBA to create a workbook that has 6 worksheets. All six sheets are identicle in format. Only the data is different. I'm trying to AutoFilter all the sheets. Here's my code...
For Each s In WB_Report.Worksheets
s. Range("B7:R7").AutoFilter
Next s
This is the very last instruction of my macro. For some reason, it's only applying an AutoFilter to 3 of the 6 worksheets.
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies View Relatedis there any way to get an advanced filter to play with autofilters? at the moment after i have applied the advanced filter it completly messes up with my autofilter to the extent that it moves where the autofilter actually sits and then when i try and use the autofilter it completly ignores the advanced filter i just applied. how to make the 2 filters play nice together and actually be able to autofilter the results of an advanced filter.?
View 2 Replies View RelatedI have a chart that gets updated to show the desired reporting period by clicking a button to run some code which applies filtering to the source worksheet using a value selected from a drop down validation list on the chart worksheet. When the code runs, the source worksheet displays temporarily. How do I prevent this switching back and forth between the data and chart worksheets during code execution? Undoubtedly, there is a better way to code this.
Sub Chart_FilterPPM()
Application.DisplayAlerts = False
wk = Worksheets("Charts"). Range("D63")
Worksheets("Leak Data").Activate
With Worksheets("Leak Data")
.AutoFilterMode = False
.Range("Headings_LeakData").AutoFilter
End With
With Range("Headings_LeakData").AutoFilter
Selection.AutoFilter Field:=2, Criteria1:=wk
Selection.AutoFilter Field:=11, Criteria1:=">5000", Operator:=xlAnd
End With
Worksheets("Charts").Activate
Application.DisplayAlerts = False
End Sub
I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
View 3 Replies View RelatedIs there by any chance a work around for using a multiple auto filters on one worksheet using combo boxes ? An exmple of dummy data is :
Sales Rep<-filter here
Paul500
John600
Tom900
Andy450
Mark300
Sales by Region<-and here
North120
South360
East480
West490
North East250
North West500
South West290
South East260
