I'm trying to create some charts in the following Google Sheet. If you look at the DataAnalyze sheet you'll see I created a helper column that lists whether an item is within the last 30 days, 30-90 days or over 90 days. The data looks like
Open
5/29/2014 10:56:00
30-90 Days
Open
5/29/2014 11:05:00
[Code]....
One the chart sheet I use simple COUNTIF formula but I want to filter based on dates so the charts show data specific to those date ranges. Is this possible within Google Sheets?
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
I have a tracking spreadsheet that covers the movement of people in a care facility. I have a COUNTIF string to cover the days of the month, however I need to find a formula to start off that string with, that will do the following:
If cell A6 (Last Name) is blank then do not count cells M6 through AQ6(my days of the month). If A6 has text then count M6 through AQ6 using COUNTIF formula I have in place, which is located in cell BC6
I have an Excel file with 42000 records that are identified by a Reference in Column E. There should be two records per reference in the file. I need to identify all records that only appear once, as well as all records that have more than 2 entries.
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
I have a column full of data like the below with relevant data on the same row.
I wish to locate the cells which have a specific section most importantly without the "cartridge only" so for example with the below
Word Academy (Nintendo DS) Word Academy (Nintendo DS) (Cartridge Only)
This would show 2 given there are two with the specific text "Word Academy (Nintendo DS)" there will always be a cell without the (Cartridge Only) part so for this the formula =COUNTIF(D:D,"*" & D1 & "*") seems to do the job to simply count the cells with that in however I do not wish to do this.
What I need to do is locate the cells that have this in but match them together in a large sheet so basically I somehow need to be able to locate the two corresponding cells which both have one of the cells values of "Word Academy (Nintendo DS)"
The cells have data in the row which I need to tie together to create a total value.
For example
Title Qty Word Academy (Nintendo DS) 5 Word Academy (Nintendo DS) (Cartridge Only)6
I need to locate the all the cells with "Word Academy (Nintendo DS)" in which would mean just the two cells "Word Academy (Nintendo DS)" + "Word Academy (Nintendo DS) (Cartridge Only)" in the above instance but I need it to then see the cell which has that in its title and add the quantity of the two together leaving me with the below
Title Qty Actual Qty Word Academy (Nintendo DS) 5 11 Word Academy (Nintendo DS) (Cartridge Only)6 11
Which is basically just adding together the quantity shown on the spreadsheet in the rows with the containing text "Word Academy (Nintendo DS)" and as "Word Academy (Nintendo DS) (Cartridge Only)"
On the attached spreadsheet Column L is an example of the result I would be desire, I have put a basic =sum formula in to just represent the value it should be showing.
I have a sheet that calculates what items are on any given transaction - this works well. I now want another table that counts how many times a certain brand comes up.
For example one item on a transaction might be "TENSOR REG TRUCK BLK 5.0 x2"
I need the table to look at this and count if tensor is in it (sheet name: 'Sheet 1') but I want it to look at the list of brands and and reference that brand rather than type it out individually.
dont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
and the trouble I am having is that in the second Countif, I need it to check the cell in the "D" column relative to what cell is being checked in the "B" column. Right now it is checking every cell in "B" against "D7" instead of "D8, D9, D10", according to what cell in "B" is selected.
I am creating a holiday chart for absence, I have put the following formula in one cell
=COUNTIF(F4:NF4,"H")+COUNTIF(F4:AJ4,"HD")
Now when these letters are typed in to the range they calculate "H" and "HD" to be 1 - is it possible to have "H"=1 and "HD"=0.5 to then give a total in the desired cell?
Basically "H" is 1 day holiday and "HD" is (0.5) half day holiday, I would like the total from a range to appear in one cell
I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:
2, 2, 4, 5
I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:
This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.
I have a problem, in a table, the cell H5 has this formula. .=IF(E5=20, COUNTIF(G5,">=10y")+COUNTIF(G5,">=12y") +COUNTIF(G5,">=14y")+COUNTIF(G5,">=16y")+COUNTIF(G 5,">=18y")). every time that G5 has a value >= "10y"or "12y" until "18y", H5 should add 1 or 2 until 5. when I fill out C5, with an answer value in G5 of + 18y, H5 = 5, everything works fine. writing 02/08/1988 in C5 the result in H5 is 5, but when I change the value of C5 for 02/08/1999, H5 should be "0" but it continues with the value 5.
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
Is there a Countif that works on the criteria of the font being 'Red' or 'Bold' ? This needs to work based on conditional formatting I have on the cells in question.
I need to enter a countif formula if a cell equals the name of the active worksheet and also cell A1. My worksheets are not always the same and I also want to be able to copy this formula to multiple worksheets so if the formula states active worksheet then is should work properly when I past it to multiple tabs (at least in my head)
