Calculating Employees Hours In Macros?
May 31, 2014
Im doing a spreed sheet to calculate employees hours. I have the employees names in column R and their hours in column S. example R5 = Mike S5 = 8. I need to search column R for all the mike's and total his hours, then move to the next employee and so on... I have already sorted the employees names so that all the names and hours correspond and starting in column R5 and S5 until the proceeding row is blank and then paste the results in column B5 (employee name) and D5(total hours)
View 4 Replies
ADVERTISEMENT
Mar 23, 2013
I need creating a formula that will tell me the total number of employee hours worked during a certain hour (6:00 AM) for a particular department. Some employees clock in at 6:00 AM, some clock in at 6:30. Here is the current formula I'm using which only tells me the amount of employees in the department not how many hours worked . I have three employees that clock in at 6:00AM and one at 6:30AM, the total I'm looking for is 3.5 but my formula gives me the result of 4.
C5:C1446 is a list of departments
T1503 is the 6:00 AM
D5:D1446 are the Clock In times
K5:K1446 are the Clock Out Times
=SUMPRODUCT(--($C$5:$C$1446="Shipping"),($T$1503>=$D$5:$D$1446)*($T$1503
View 6 Replies
View Related
Apr 15, 2014
I have to calculate employees work hours for overtime.
in the timesheets:
A B C D E
1 ID Date Code Hours PayMethod
2 A123 4/14/14 TRN 20:00 Regular
3 A123 4/14/14 TTT 15:00 Regular
4 A123 4/14/14 TRN 13:00 <----- total for cell D2,D3, and D4 is more than 40
A B C D E
1 ID Date Code Hours PayMethod
2 A123 4/14/14 TRN 20:00 Regular
3 A123 4/14/14 TTT 15:00 Regular
4 A123 4/14/14 TRN 5:00 Regular <----- to make 40
5 A123 4/14/14 TRT 8:00 Overtime <----- 13-5=8, so i have to write down 8 here for overtime
How can I do this?
I want to make a command button for macro to perform this.
View 2 Replies
View Related
Mar 30, 2012
I need to create a formula that assumes 40 hours = 1 FTE (full time employee). As an example if I have a total of 100 hrs I need to know how many employees to hire. So in this case it would be 2.5.
View 1 Replies
View Related
Jun 26, 2009
=IF(C5>40,((C5-40)*D5*1.5)+40*D5,IF(C5
View 9 Replies
View Related
Jan 30, 2013
Need VBA macro to read and sum data from multiple worksheets
The “summary” worksheet contains list of all employees. I need to update the total number of hours for each employee by scanning all worksheets in the workbook as follows:
Once I click on a "update" button, I need to scan all worksheets (I have one worksheet for each week) which contains the total number of hours for employees by week. I need to calculate and add the total number of working hours for each employee then move to the next worksheet and so on ..
Once all worksheets are all scanned, the final total of working hours get posted in front of the employee name in the assigned field.. I need to do this for all employees. I also need a macro to create a new worksheet.. I attached an example with little description inside .. Labor Detail Job to Date-2.xlsx
View 5 Replies
View Related
Aug 11, 2010
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies
View Related
Oct 6, 2009
I have a sheet in which in Coloum A I have manager names, then in Colum B I have list of Employees reporting to that manager, then in Column C, I have total login time of each employee which should be => 8 hours. In a new sheet, I want to get the count of employees next to the each manager's name who login time is less then 8 hours.
View 3 Replies
View Related
Aug 19, 2013
Maybe it is the layout but I was trying to keep it simple and just put hours into a cell for each employee.
I have 2 employees per day, one in the morning and one in the evening. How to get excel to add the hours for each employee at the bottom per month. Simple right?
Here is an example of what I thought would be so easy (first week in excel spreadsheet format)
sun mon tue wed thu fri sat
emp1 5 emp3 6 emp5 5 emp1 4 emp3 5 emp5 5 emp1 6
emp2 5 emp4 5 emp6 5 emp2 5 emp4 5 emp6 6 emp2 6
Is there a way to associate cells to look at values for each employee and add all the cells for the month?
View 5 Replies
View Related
Jan 26, 2010
I am usuing INDEX and MATCH to pull back employees hours from a master sheet, I am asking excel to Index, matiching firstly the agents name and then the day of the week (Formatted: Mon,Tue,Wed,Thurs,Fri,Sat,Sun). This works perfectly for every day of the week using the following formuls except for Sun where it returns #REF!
=(INDEX(Hours!$B$4:$G$166,MATCH($F$1,Hours!$A$4:$A$166,0),MATCH(C7,Hours!$B$3:$H$3,0)))
View 2 Replies
View Related
Apr 22, 2014
I am trying to set up a time sheet for staff where it calculates hours worked in and outside of core hours. I can do a calculation to work out what they have worked in and out of core hours providing that part of their time starts of finishes in core times. The problem I am having is when some one works only outside core hours. Our core hours are 6am to 6pm. The problem is when they work from say 7pm to 1am. This is irregular work paid as overtime not shift work.
View 5 Replies
View Related
Mar 13, 2008
I am working in call center, and I get tickets and i have to meet my Services Level Agreement (SLA) with in pre defined working hours.
My working hours are 8:00 AM to 17:00 PM, Monday to Friday. (this includes 1 hour of Lunch time which is not considered as business hour)
As per the SLA, i have to complete the ticket in 40 business hours, i.e 5 business days.
Suppose a ticket is created on 3/5/2008 10:00 AM. I want to know how much time is left for me to work on that particular ticket.
View 12 Replies
View Related
Jan 12, 2010
I want to calculate employee rostered hours or days off from an exported crystal reports. The problem isn't how to calculate the hours but to calculate accurately when formatting changes occur in the exported report. This is an example for the exported sheet data.
http://farm3.static.flickr.com/2748/...50a38e59_o.jpg
So to calculate data intially using the formula
View 10 Replies
View Related
Oct 3, 2008
I have a ROW of numbers (hours) and I need to figure the hours left. Here is an example of 6 colums, Zeros and blanks are valid entries.
C1 C2 C3 C4 C5 C6 Hours Left
16 8 0 0 0 0
16 8 4 4
8 2 1 0 0
16 0 0 8 4 2 2
8 16 10 8 8
I'm trying to get a formula that will figure out hours left. I've tried a number of times.
View 5 Replies
View Related
Dec 12, 2008
I have a spreadsheet where I record individual staff start time, end times and the length of their break. From this I caculate the hours they worked for the day.
E holds Start, F holds End and G holds Break length. Thus using the following forumula gives me the number of hours and minutes:
View 4 Replies
View Related
Jan 1, 1970
I can do the timesheet formula for adding the hours worked as follows:
Start Finish Total
08:45 17:15 8.5
However, it doesn't work when I fill in a whole week work of hours in this format:
Start Finish Total
08:45 17:15 08:30
It works on a daily basis, but when total hours exceeds 24, the formula get's all mixed up - how to I format the total column to account for every 5 minutes worked, which you can't do when converting to decimal??
View 14 Replies
View Related
Apr 23, 2008
I use this formula at work to calculate business hours from Mon-Fri:
=IF(OR(L10="",L11=""),"",(NETWORKDAYS(L10,L11,$N$2:$N$23)-1)*($Q$3-$Q$2)+IF(OR(ISNUMBER(MATCH(INT(L11),$N$2:$N$23,0)),WEEKDAY(L11,2)>5),$Q$3,MEDIAN(MOD(L11,1),$Q$3,$Q$2))-IF(OR(ISNUMBER(MATCH(INT(L10),$N$2:$N$23,0)),WEEKDAY(L10,2)>5),$Q$2,MEDIAN(MOD(L10,1),$Q$3,$Q$2)))
where Q3= business start time 8.30am
where Q2= business end time 5.30pm
thus the difference between 18-Apr-08 16:30 and 21-Apr-08 13:30 is 6 hours.
I now need to adapt this formula for another Department that also works on Saturday from 8.30am to 5.30pm.
View 9 Replies
View Related
Jun 3, 2008
This may seem like an odd request... I recently received a protected worksheet that I entered my date of birth into, and it told me how long (if I pressed F9) I had been alive in y/m/w/d/m/s etc. I was wanting to do a similar spreadsheet to show how long I had stopped smoking for, and a running total of how much I was saving, but I couldn't look at the spreadsheet for help. The stop time was 01/06/08 - 05:00am GMT, up until present, and buying cigarettes I was spending 0.00004166666 per second. Is it possible to create such formulas?
View 9 Replies
View Related
Feb 20, 2014
Example: In cells A1:A10 random number between 0 & say 20, need to sum ABOVE 8 = (calculating overtime hours)
E.g.
A1 = 0
A2 = 8
A3 = 8
A4 = 10 (giving 2)
A5 = 12 (giving 4)
A6 = 5
A7 = 13.5 (giving 5.5)
A8 = 8
A9 = 0
A10 = 16 (giving 8)
A11 = (Total overtime above 8 hours) 2+4+5.5+8 = 19.5
Need to be able to increase rows and drag across.
View 3 Replies
View Related
Mar 18, 2014
I'm trying to calculate shift working hours without using dates.
The scenario is
Cell A1 = Start Time
Cell A2 = Start Time
Cell A3 = Break Time
Basically I want the output to calculate hours worked between:-
0000 and 0600 as a total in cell A4
0600 and 1800 as a total in cell A5
1800 and 0000 as a total in cell A6
Then if the value of A5 is greater than A3, subtract A3, but if the value of A5 is less than the value of A3, A5 should be zero and the remainder of the value of A3 subtracted from A4 (or A6) depending which has a value.
View 5 Replies
View Related
May 2, 2008
I need to calculate time taken to fix a piece of equipment.
A1 B1
BREAK TIME FIX TIME
4/22/08 23:00 4/23/08 04:00
Should be 5 hours, but i can't find the formula to make it work.
View 14 Replies
View Related
Nov 27, 2012
Weekly Timesheet.xlsx
This spreadsheet calculates hours worked great for first and second shift but when you enter times for third shift it goes all whacky with the outcome.
View 10 Replies
View Related
Nov 30, 2012
I thought I had everything worked out with this timesheet but I've discovered one more problem.
Weekly Timesheet.xlsx
The total overtime hours needs to show that anything over 40 hours in the Total Regular Hours cell is overtime. And it also needs to show only up to 40 hours in the Total Regular Hours cell.
View 8 Replies
View Related
Aug 15, 2010
how can i calcaulate working hours between two days.
Working Hours 07:30 - 14:30
e.g. mm/dd/yyyy
start time 01/04/2010 17:34:58
stop time 01/05/2010 08:23:35
View 9 Replies
View Related
Mar 29, 2012
I am trying to calculate when data is out of hours based on it being before 08:00 and after 16:30, plus also weekends.
I have used the following formula to calculate the day of the week.
=TEXT(WEEKDAY(AE2), "dddd")
I have this in a separate column.
This is how my sheet looks.
Actual Start TimeOut of HoursActual Start DateDay of Week
14:1525/12/2010Saturday11:0028/12/2010Tuesday22:3028/12/2010Tuesday
13:3029/12/2010Wednesday09:4030/12/2010Thursday13:0002/01/2011Sunday
09:3806/01/2011Thursday08:0507/01/2011Friday12:0009/01/2011Sunday
11:1010/01/2011Monday08:1512/01/2011Wednesday10:1113/01/2011Thursday
11:1514/01/2011Friday15:2815/01/2011Saturday10:4016/01/2011Sunday
16:3028/12/2010Tuesday13:0220/01/2011Thursday13:0624/01/2011Monday
15:0827/01/2011Thursday17:4029/01/2011Saturday
The out of hours column is where I figure I need an IF statement but not sure which way to approach it best.
View 2 Replies
View Related
Aug 1, 2014
I am looking for a formula that counts from each particular month
The main List has the following
Column C has all dates
Column D has hours worked
Column E has engineers name
The Second List is broke down into months and hours
Column I Has month ie I4=Jan 14, I5 = Feb 14 etc
Column J I need to have a total taken from column D from the month in column I
View 8 Replies
View Related
Jul 25, 2002
How should I calculate working hours between two dates? Say if start at 26 july at 15:00 and finish at 29 july at 10:00, the function should return 4 hours because the working hours are from 8am to 5pm (8 - 17), and there is a weekend between the dates. Preferably the function should work like the NETWORKDAYS() function, but it should also include the time, not just the dates. And also, if have to add say 8 hours to a date, how should I calculate the result? Also this function should aware of the working hours and holidays, so it should ignore those times.
View 9 Replies
View Related
Jan 15, 2009
I'm trying to calculate the hours worked for both my day shift and my night shift.
Day shift (thanks to search ) I have managed to figure out and worked quite well.
=ROUND((E7-D7)*96,0)/4
It totals adds up the time and converts it into a decimal of hours worked.
For example Joes starts at 1100 and finishes at 1330 it returns a total of 2.5 hours worked.
However I strike a problem with nightshift.
They start in the late afternnon and work thoguh into the am.
I have used the same formula but it doesn't seem to work:
=ROUND((K7-L7)*96,0)/4
I assume because once the clock strikes 12 it's a new day and it can't work out the maths.
Lets use the example form about but make it pm.
Joe starts at 2300 and finishes at 0130 it should give me a total of 2.5 hours instead it gives me 21.5 hours
View 9 Replies
View Related
Sep 25, 2006
i need to get a formula that will calucate hours and min. its for how many hours the employee has not worked. some of them would be strait hours some would be just min there is no way to tell.
example
lates 2 hours
anp(absent no pay) 12 hours
sicks 55.5 hours
no calls
early outs 21 min
(this is just an example if it were real this person would be fired)
i know this adds up to 69.85 hours but i can't fuiger out a way to get it to calucate in excel. i know i could have it all changed to min and then devied by 60 to get the hours but how do i get it to read what is mins and whats hours?
View 7 Replies
View Related
Jul 24, 2009
I can't figure out how to do a proper formula for calculating time. For instance I have one column that says "Time In", the next is "Time Out" and the other is "Lunch Time". My calculation needs to be this:
Find the total hours between the Time In and Time Out and then Minus the lunch time to get total hours worked for the day. The only way I can get this to work is using 24 Hour time format. Is there another way?
View 3 Replies
View Related
