I thought I had everything worked out with this timesheet but I've discovered one more problem.

Weekly Timesheet.xlsx

The total overtime hours needs to show that anything over 40 hours in the Total Regular Hours cell is overtime. And it also needs to show only up to 40 hours in the Total Regular Hours cell.

I need to worked out Hours worked in a timesheet. This was the easy part, the hard part is the clause tha HR threw in, which is:

If you have worked and 8 hour day WITH 1 hr lunch then you qualify for overtime. if you work a 8 hr day and work through your lunch (1 hour) (so equivelant to 9 hrs) you still do NOT qualify for overtime there for Overtime = 0.

This is cause some people work though their lunch to get overtime, but legally they have to have a break so we are not paying overtime for it. I have basically tried in a formula to replicate this but it works with some data and not with all. attached is an example, as you'll see the formula works in some cells, but not others.

i am creating a weekly time sheet for my company.the problem that i have is when the persons time reaches 40 hours, the time needs to be calculated in the overtime field. this is really tough for me when the person reaches 40 hours in the middle of the work day. I cant figure it out. i have attached the spreadsheet if you would like to look.

approach to sort out Day/Night Hours. Its bomb proof!

A new situation demands overtime payments......start and finish time can be any time day or night (crap job!), overtime is payable after 8 hours. Thus I have day (0600-1800) standard rate, day (0600-1800) overtime rate, night (1800-0600) standard rate, night (1800-0600) overtime rate.

So, starting at 1400 and finishing at 0100 give 4 hours day std + 4 hours std night + 3 hours night o/time; whereas starting at 0200 and finishing at 1300 gives 4 hours std night + 4 hours day std + 3 hours day o/time.

I'm using Excel 2003 and 2007 so use the Excel 97-2003 format.

Basic Hours Worked Overtime Hours Worked Day Time In Time Out Hours Worked Time Decimal Lunch Hour Number of hours

Mon 8:56:00 AM 4:50:00 PM 07:54 7.90

[Code] .......

To determine the hours worked from the times input I am using the following formula:=

HOUR(D65)+MINUTE(D65)/60

These formulas seem to be working fine but what I am stuck on is deducting and adding lunch hours and overtime hours.

The first problem I have is for example if an employee were to type the figure 1 in the Lunch Hour column for each day lunch is taken I would like it to be subtracted from the bottom total.

Also if any overtime were input on any day I would need it added to the totals.

I’m trying to take an existing employee time sheet in Excel (Office XP) that has no formulae whatsoever, and add the appropriate formulae so that all an employee needs to do is enter the daily start and end times and the time sheet will calculate daily, weekly, and overtime hours worked. Among others, some of the problems I’m having are:

I need to keep the original format (though I've added a few columns).

Overtime in the State of Texas does not apply until after 40hrs have been worked. Then any daily hours over 8 can be applied retroactively. So I need a timesheet that shows overtime as regular hours worked until 40 hours have been reached, then separates the daily overtime from the regular column and places it in a daily overtime column. Shouldn't be too hard to find...Right?... Actually, that’s been quite easyexcept for weekends. Saturdays and Sundays are usually overtime but not always.

The real problem is the beginning day of the pay period, if a pay period begins on any day other than Monday (Wednesday, for example,) then weeks one and sometimes three can never equal 40 hours each unless the assumption is that the days worked in the same week but prior or subsequent period are worked at 8 hours each. The formulae must make this assumption. How do I write a formula that assumes an empty cell actually has a value? :o

I know that it’s difficult (if not impossible) to offer any suggestions without seeing the time sheet itself, so, If it would be helpful, and anyone has any suggestions. I’ve uploaded the week one of the timesheet as it stands now.

If you'd like to see the entire worksheet I've uploaded it to ....

I'm been trying to create a timesheet that will auto calculate the hours of normal / overtime 1 / overtime 2

Rules: Saturday / Sunday / Public Holiday = Overtime 2 Monday to Friday (8:30 till 17:30) = Normal (Auto Monday to Friday (17:30 till 22:00) = Overtime 1 Monday to Friday (22:00 till 8:30) = Overtime 2

* If Public Holiday column is set to 1 then all hours will auto set to overtime 2

* If Breaktime column is > 0 then deduct from total hours calculate

Sample:

Name Date / Day Public Holiday Start time End time Breaktime Normal hour(s) Overtime 1 Overtime 2

Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.

For accounting and payroll purposes, we need the totals to display in both hour and decimal format.

So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.

I have a report given to me formatted as general. These are overtime hours for 5000+ associates. The time is shown as 4.52 being 4 hours and 52 minutes.

If I sum 4.52, 5.1, .18... I get 9.8 when in fact it is 10hrs 20m. I need this to display as 10.2

In fact I have done it in the past but lets just say im ready for the weekend.

When people enter their hours I get them to do it in 24hr format, fine. BUT my problem is coming when I'm working out wages etc. I can get the user to enter 09:00 (start time) and 17:30 (end time) but then the cell works out the hours (cell 2-cell1) gives 8.30 in time format when I need it to show 8.5 (total hours worked) This means when it goes to work out wages, it takes 8.5*hourly rate not 8.3!!

I am trying to get my time sheet to work out right but for some reason the formulas are a little more then what I can do. My time sheet is set up on a weekly bases. I have a regular time line, an overtime line and a total time line. an example I have is I work 12 hours a day I need an 8 to show up in the regular hours, 4 in the overtime and 12 in the total hours.

I'm looking to calculate OT wages when they happen vs only at the End of Week totals. ie... if the employee hits 40 hours midshift on a Wed, I want to calculate what the total dollars would be for Wed.... a few hours at regular time plus what ever hours above 40 at time and a half.

We are guaranteed (right now) a 10 hour day. (we are on 4 - 10 hour shifts). So if we work 9 hours say on Monday, we get 9 hours of straight time and an hour of short work week (approx 80% of pay). Now if we work 11 hours on Tuesday (which they can do unfortunately) I get 11 hours of straight time and no overtime. We have to make up for the short work week hour. So a less complicated explanation would be if I dont work more than 40 hours per week, no overtime no matter what I actually worked per day. Seems pretty simple but what I want and need to do is to calculate it per day.

I got it to the point where If the day where we get short work week is first and overtime after that, it works. But if we work overtime first then get short work week later in the week, it wont calculate it. I know why it wont work now but I dont know how to make it work. LOL Here's a link to the file.

I am creating a spreadsheet that will track hours of overtime worked and within the spreadsheet there are several separate departments listed.

I have made it dynamic so that the summary spreadsheet will update as employees are added. I’m using a macro and some complicated helper cells to be able to sort the employees based on their total OT hours worked.

I am working on a project involving calculating time. It is a timesheet calculation. I was able to design the following layout:

.....A............B..........C..........D.......E.....F 1....Date.........Time IN....Time OUT...Hours... Total 2....01/01/07.....1830.......1930.......01:00...01:00 3....01/02/07.....1930.......2330.......04:00...05:00 4....01/03/07......830.......1900.......10:30...15:30 5 Column A is formatted for DATE. Columns B and C are GENERAL. Columns D and E are DATE format customized as '[hh]:mm'

The formula to calculate the time difference between the numbers in column B and C is located in column D. It is as follows: =IF(C4<1000,TIMEVALUE(LEFT(C4,1)&":"&RIGHT(C4,2)),TIMEVALUE(LEFT(C4,2)&":"&RIGHT(C4,2)))-IF(B4<1000,TIMEVALUE(LEFT(B4,1)&":"&RIGHT(B4,2)),TIMEVALUE(LEFT(B4,2)&":"&RIGHT(B4,2)))..................

calculate overtime hours from daily time entries. Normal hours are 7.6 per day Time 1/2 is hours over 7.6 but no more than 2 hours Double Time is all hours over that.

I have the spreadsheet with the days of the week in one row and at the end I have 1 cell for Normal Hours, Time 1/2 and Double Time. I need a formula that will work out overtime off each day and add for all days of the week and enter data into one cell. So all normal hours are in Normal hours and Time 1/2 and Double time are automatically calculated once hours are put in per day manually.

WedThurFriSatSunMonTuesTotal Normal HoursTime 1/2Double Time 10101068

I'm trying to calculate timesheets including hours at overtime. A1- Start time, B1- Lunch Start, C1- Lunch finish, D1- Finish In E1 I want standard rate hours 'up to 8' In F1 I want the remaining hours. I have tried IF rules and realise these are wrong.

I have to calculate employees work hours for overtime.

in the timesheets:

A B C D E 1 ID Date Code Hours PayMethod 2 A123 4/14/14 TRN 20:00 Regular 3 A123 4/14/14 TTT 15:00 Regular 4 A123 4/14/14 TRN 13:00 <----- total for cell D2,D3, and D4 is more than 40

A B C D E 1 ID Date Code Hours PayMethod 2 A123 4/14/14 TRN 20:00 Regular 3 A123 4/14/14 TTT 15:00 Regular 4 A123 4/14/14 TRN 5:00 Regular <----- to make 40 5 A123 4/14/14 TRT 8:00 Overtime <----- 13-5=8, so i have to write down 8 here for overtime

How can I do this?

I want to make a command button for macro to perform this.

I have 3 basic job categories... each of those categories start overtime at a different hour.

So, if employee A is a dock worker, he starts overtime at 25 hours. If employee A is an office worker, he starts overtime at 40 hours and if he is a driver, he starts overtime at 55 hours. So based on that info, I'm wanting my spreadsheet to figure out how many hours each employee has left for the week.

The 2nd part question is how many hours per day is left for the week. Rather than making a separate tab for each day of the week, I'd rather the spreadsheet know what day of the week it is and divide accordingly.

I'm creating an log to track the total number of hours an employee works in one day and calculate regular and overtime hours worked based on the following criteria: overtime will be >8 hours in one day and >40 hours in one week.

Right now I have it 'mostly' figured out, but under certain conditions, it calculates more than 8 hours in one day for straight time. Is there a way to set a maximum value for the straight time cell and have the difference be added to the overtime cell?

My overtime pays is anything exceed over 8 hours per day or over 40 hours per week. Right now I can only calculate overtime by either over 8 hr/day or over 40 hr/ week. I need a way to combine both.

I need a formula to calculate hours worked between specific times. In the worksheet I have, I need to calculate the hours worked between 5am and 10pm, the start time is in C7, and the finish time in D7 the formula need to be in H7, and another formula in I7 to calculate hours worked before 5am and after 10pm .

I have employees hours worked entered in multiple rows. Columns are Date, Name, Hours worked; then a column that calculates the week number.

The data is entered each day so the Names are not in order and I'd rather not have to resort by name each week.

I'm collecting that data along with several other fields in a pivot table, then I have a summary sheet that uses GETPIVOTDATA formulas to compile a ton of statistics.

I want to be able to filter the pivot table on any given number of weeks. I need to be able to calculate overtime (greater than 40 hours in a week) for each name over the filtered weeks. So I could want to see OT for weeks 4, 5, 7 combined.

I am trying to calculate over time based on shift time.

For example: Regular shifts are between 7:00 AM to 3:00 PM (Monday thru Friday). Anything between those hours and on those days should be considered REGULAR TIME. Anything between 12:00 AM to 6:59 AM or between 3:01 PM to 11:59 PM should be calculated as OVERTIME.

Anything on Saturday or Sunday should be calculated as OVERTIME as well.