Calculating Start / End Time Between Night Shifts 24 Hours?
Dec 26, 2013
We have a person who work in 24/7 support. One person work passive 24 hour, but it 24 hours are divided in to next shifts: normal 06-18, over hours 18-22, night hours 22-06.So if we have some one who is supporting client say from 17h till 23h, we have next results:
Name Start time End Time 06:00 - 18:00 18:00 - 22:00 22:00 - 06:00
John 17:00 23:00 1:00 4:00 1:00
Is it possible to in time range enter formula who subtracted end time from start time, but taking into account 24 hours?
View 9 Replies
ADVERTISEMENT
Dec 22, 2009
I want to find the hours worked in day shift and night shift. Day shift is from 06:30 to 18:30 and night shift is from 18:30 to 06:30. Listed below is an example of my date/times.
Note that the night shift carries over to the next day.
Start/Finish
21/12/09 07:00 to21/12/09 11:09
21/12/09 07:46 to21/12/09 14:41
21/12/09 12:13 to21/12/09 22:08
21/12/09 16:40 to21/12/09 18:05
21/12/09 19:40 to22/12/09 02:34
21/12/09 23:20 to22/12/09 04:39
22/12/09 02:06 to22/12/09 06:15
View 9 Replies
View Related
Oct 1, 2009
I’m working on a timesheet and I need to separate the hours worked that are before 6 am from all the others. For example if someone works 1:00 am to 8:00 am I need a cell to populated with 5 representing the hours worked before 6 am. The formula below works fine except when the start time is 12:00 am. I am also having trouble if the start time is before midnight like in a 11pm to 5 am shift.
=(IF(AND(S3<=$AG$97,S3>=$AG$73),(($AG$97-S3))*24,0))
S3 is the start time
AG97 is 6:00 am
AG73 is 12:00 am
View 4 Replies
View Related
Jan 15, 2009
I'm trying to calculate the hours worked for both my day shift and my night shift.
Day shift (thanks to search ) I have managed to figure out and worked quite well.
=ROUND((E7-D7)*96,0)/4
It totals adds up the time and converts it into a decimal of hours worked.
For example Joes starts at 1100 and finishes at 1330 it returns a total of 2.5 hours worked.
However I strike a problem with nightshift.
They start in the late afternnon and work thoguh into the am.
I have used the same formula but it doesn't seem to work:
=ROUND((K7-L7)*96,0)/4
I assume because once the clock strikes 12 it's a new day and it can't work out the maths.
Lets use the example form about but make it pm.
Joe starts at 2300 and finishes at 0130 it should give me a total of 2.5 hours instead it gives me 21.5 hours
View 9 Replies
View Related
Dec 15, 2013
I have attached the xlx sheet. I am a truck driver and I always have to calculate my weekly wage on paper.
I start everyday at different times it varies the end of shift as well. We have day shift, night, saturday, sunday payrates.
I have done an excel sheet I was trying for a couple of days reading forums and watching videos but just I couldn't.
Example if I start Friday at 18:00 and finisth Saturday at 04:00. I have in total 10 hours.
Day shift: 1 hour
Night shift: 5 hour
Saturday: 4 hour
So in one shift I get 3 different payrate. In one shift if I work more than 6 hours it must be deducted 00:45 minutes.
Day shift: 07:00-19:00 - £10.7
Night shift: 19:00-07:00 - £11.7
Saturday - £12.7
Sunday - £14.7
Attached File : DRIVER SHIFTS VARIABLE SHIFTS AND PAYRATES.xlsx‎
View 7 Replies
View Related
Jun 27, 2014
As you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours.
In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
View 1 Replies
View Related
Aug 6, 2013
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
View 1 Replies
View Related
May 5, 2006
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
View 9 Replies
View Related
Feb 20, 2009
I'm battling to come up with the formula to calculate time and a half and double time. My boss wants me to show the overtime worked AFTER 40 hours has been worked. I have attached a copy of my spreadsheet.
View 4 Replies
View Related
Mar 25, 2014
I am working on an excel spreadsheet for work and I have to show a chart that shows the time of day a space is in use. Right now I am having to mark all of these by hand which takes me forever because I have a couple thousand lines of information.
I need to mark the hours in use based off the start and finish time.
For Example:
1) If the start time was 7:00 and the end time was 10:45 then the markers would only mark 7am and 10am
2) If the start time was 7:15 and the end time was 10:00 then the markers would only mark 7am and 9am
3) If the start time was 7:30 and the end time was 10:30 then the markers would only mark 7am and 10am
4) If the start time was 7:45 and the end time was 10:15 then the markers would only mark 8am and 9am
I was given the formula and it works to count the whole hour but now I need the formula tweaked and I don't know how...I need the formula to account for quarterly hours...and I don't know how to fix it.
Attached is an example of the spreadsheet of what I currently have and of what I need. Book1.xlsx
View 2 Replies
View Related
Feb 27, 2010
Is it possible to calculate hours if both the start and end time are in the same cell. Unfortunatly the developers of our scheduling program developed it so when you export the schedule to excel it shows Greg in A1 and 3:00pm-9:00pm in A2. I would like to have excel calculate the 6 hours so I can use it to auto generate another spread sheet I am making.
View 10 Replies
View Related
Feb 28, 2013
I can calculate total hours when a user enters a start date/time and a finish date/time. The kick is I only want to include hours from 2:00 PM to 12:00 AM (10 hour period). So assuming all the start and end times will be in this range, how can i calculate work hours over multiple days? For example: Start date/time = 2/26/13 2:30 PM and end date/time = 2/28/13 10:30 PM. I want my calculated hours to show 28 hours.
View 1 Replies
View Related
Feb 20, 2010
In the attached WB - the formula, in Col. "D", seems to be too long - although returning the expected result. Could somebody lighten my eyes with a much shorter formula ?
View 3 Replies
View Related
Oct 15, 2007
I have a timesheet where user updates start and end time for various tasks.
I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)
The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.
If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.
How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.
View 9 Replies
View Related
Feb 12, 2014
I am trying to come up with a formula that calculates total time someone has worked in a day. The scenario is an individual will work at a home and start working with an individual. Their start/end times look like this in a pivot:
Min Start Max Start Min End Max End
Location A+Counselor A 8:56 AM4:01 PM 1:11 PM 7:00 PM
Location A+Counselor B 12:00 AM 8:00 PM 6:00 AM 11:59 PM
Location B:Counselor C 7:00 AM 12:00 PM 2:00 PM 4:00 PM
Location C+Counselor D 8:00 AM 8:00 AM 4:00 PM 4:00 PM
Some people work split shifts while others work a straight shift. The formula I created was this:
=IF(OR(B9=C9,E9=D9,D9=C9),E9-B9,IF(D9>C9,((E9-D9)+(C9-B9)),IF(C9>D9,((D9-B9)+E9-C9),"New Formula Needed")))*24
(I use a pivot table to show max min for start and end times)
This works great except for the individuals that have multiple punches during the same time frame. The one scenario I am having trouble solving for is when someone punches in more than once during their shift displaying. This occurs when a counselor starts a shift working with one person but then adds another person mid shift. An example of this could be:
Location A+Counselor E Min Start Max Start Min End Max End
Consumer 1 1:00 PM 1:00 PM 8:30 PM 8:30 PM Total Time: 7.5
Consumer 2 12:00 PM 12:00 PM 2:35 PM 2:35 Pm Total Time: 2.6
Pivot says that they worked a total of 10.1 because it is grabbing the max and mins and calculating. The actual total time worked is 8.5 hours in reality.
The raw data comes in like so:
Location Counselor Consumer Start Time End Time
A A A 1:00 PM 8:30 PM
A A B 12:00 PM 2:35 PM
A A C 12:00 PM 5:00 PM
Is this solvable with a formula?
View 1 Replies
View Related
Jan 26, 2009
I have a timesheet that the manager fill in every night for the workers, simply it has a start time and end time and it calculates the hours worked (all times are entered in quarters of an hour ie 9.25 for 9:15 etc). At the moment i can work out if a person is on day or night with:
View 2 Replies
View Related
Jan 31, 2008
I have a spreadsheet that calculates the total working hours of our warehouse staff, overtime, etc... using some good advice that has been published here before.
Cell C1 : starting hour
Cell D1 : ending hour
The hours are filled in, using 1904 system, without date as 08:00, 12:00, 21:00, etc... total hours is calculated as follows:
=(D1-C1+(D1
View 9 Replies
View Related
Jul 24, 2009
I can't figure out how to do a proper formula for calculating time. For instance I have one column that says "Time In", the next is "Time Out" and the other is "Lunch Time". My calculation needs to be this:
Find the total hours between the Time In and Time Out and then Minus the lunch time to get total hours worked for the day. The only way I can get this to work is using 24 Hour time format. Is there another way?
View 3 Replies
View Related
Feb 19, 2009
Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that?
For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).
Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
View 5 Replies
View Related
May 1, 2009
I am looking for a formula to calculate time from one date and time to another. The only catch is I only want it to use times during specific times.
Example
Start 5/1 8am and end 5/2 8am. The working hours are from 7am until 4pm and from 8pm till 5am. In this example the solution should be 17 hours.
How do I set up a formula to respect only working hours (also excluding weekends except for Saturday early am from midnight until 5am.
Sorry if this is confusing, I am trying to use IF statements but I’m fighting a losing battle.
View 7 Replies
View Related
Jun 27, 2009
I am using Microsoft Excel 2003. My question is about calculating time. Let's say my answer, after calculating time, is 2 hours and 1 minute (2:01) and that answer is placed in cell A1. How would I be able to have only the 2 hours (2:00) carry over to cell A2 without the minutes showing?
I have tried =MOD(A1,24/24) and =TIME(0,HOUR(A1),0). I have also tried to right click the cell, went to Format Cell, went to the Numbers tab and tried the different options in the Time and Customs category, but I can't seem to get 2:01 to appear as 2:00 only.
View 4 Replies
View Related
Aug 6, 2007
If a Rescue Officer is called out at 23:00 and is back at 04:00, this should equate to 5 hours worked.
It seems that if my times are all on one side or the other of a 24 hour cycle, my calculation work fine but it it breaks across the 24 hour (as above, it doesn't work.
A2=04:00
A1=23:00
Using (A2-A1)*24 give me -19.00 hours
My SS macro has a line:
s = (wks.Cells(c, 3) - wks.Cells(c, 2)) * 24 'calculates the duration of time worked
Is there any way of getting excel to calculate an elapsed time in hours when the start and end times roll over from one day to the next?
View 9 Replies
View Related
Oct 15, 2007
The below is for Excel 2003.
I want to set up a spreadsheet that can show my work is completed within a service level agreement, based on working hours of 9-5 Monday-Saturday.
I want to be able, for example, to log that a piece of work is reported at 09:00 on a Monday and completed at 10:00 on Monday and for excel to calculate that as 1 hour until completion. Fine so far. But what if that job was closed at 10:00 two days later? Based on an 8 hour working day, that should be 17 hours.
And what if a bit of work comes in at 17:00 on the Saturday. No one works the Sunday. Say the job is completed at 10:00 on the Monday. that should calculate as 1 hour to completion.
The SLA I'm setting is 4 hours.
View 9 Replies
View Related
Sep 29, 2006
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
View 9 Replies
View Related
Sep 29, 2012
I would like to write a macro that can return the number of hours worked during the night shift.
In this case, the night shift starts at 21:00pm and ends at 6:am next day.
The column "I2" returns the number of hours worked during the day - formula ((F3-C3+(F3<C3))-(E3-D3+(E3<C3)))*24);
The column "J2" gives the overtime hours taking into account the number of regular hours allowed - IF(OR(I3="",I3<6),"",IF(I3>H3,"",I3-H3));
Cells "C3:F13" allows users to set up (using a data validation list) starting time, lunch in, lunch out, end time ( columns C and D AM; E and F PM);
My question is: How can I calculate night hours in column K, without having conflits with numbers returned in column I (worked hours)? Is it possible to write a macro for this?
Below please see the table:
B
C
D
E
F
G
H
I
J
K
1
Name
Start Time
Lunch In
Lunch Out
End time
BREAK?
Regular hours
Worked Hours
Overtime
Night Shift
[Code] ......
View 1 Replies
View Related
Mar 12, 2013
(Excel 2007). I want to separate night hours 22:00-6:00 fom day hours 6:00-22:00 in my work plan.
I am using all kind of shifts for example
8:00-23:00 = 14 day hours 1 night hour
21:00-7:00= 2 day hours 8 night hours.
16:00-2:00=6 day hours 2 night hours
View 6 Replies
View Related
Aug 5, 2014
I'm currently working with MS Excel 2010 and have a document full of people with their working hours. So their start time and their end time. Now these people should get a monetary reward dependent on the different time shifts they work in. For example, someone is scheduled for a shift starting at 6:00 AM (cell A1) until 20:00 PM (Cell B1). His actual clocking-in time is 5:48 AM (Cell C1) and clocking-out time is 19:58 PM (Cell D1). There are three shift reward types:
1) Shift Regular (E1): From 7:00 AM until 18:00 PM
2) Shift night (F1): From 18:00 PM until 0:00 AM
3) Shift midnight (G1): From 0:00 AM until 7:00 AM
How can create a formula in cell E1, F1 and G1, which will first look at the actual clocking-in time and scheduled time and will say 5:48 AM is too early as you start at 6:00 AM, so 1 hour in cell G1, and 11 hours in cell E1 and 2 hours in F1 (should automatically round up 19:58 to 20:00). However, after 4 hours work someone will get 0:30 hours lunch break, which should be deducted in E1 as well. And as mentioned earlier actual clocking time should be round up to 15 minutes, so 19:53 should be 20:00 and 6:13 should be 6:15.
Also note that the cells with time are in TIME and should become numbers (e.g. 7,5 hours) in cells E1, F1 and G1.
I also added an attachment, which shows what I would like to retrieve automated in the RED boxes.
View 1 Replies
View Related
Aug 11, 2010
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies
View Related
Oct 10, 2009
When I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies
View Related
May 6, 2014
I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
View 4 Replies
View Related
