Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
  Advanced Search
  HOME    TRACKER    Excel


Advertisements:










Calendar To Populate Textbox In Userform


I've created a userform to populate rows in a worksheet. The userform gets details of flights with inbound and outbound dates. I'd like a calendar to popup so the user can just select a date with the click of the mouse which then resides in the textbox until sent to the sheet. I know how to get the calendar to pop up when entering directly into the sheet but I don't want the user to have to touch the sheet unless making amendments.


View Complete Thread with Replies

Sponsored Links:

Related Forum Messages:
Userform Textbox To Populate With
Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.

If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.

What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.

I'm ok with the search and find :

View Replies!   View Related
Pass Calendar Control Date To Selected TextBox On Another UserForm
I have a workbook that has multiple spreadsheets. Data is added to the spreadsheets using userforms for each spreadsheet. I have created a pop-up calendar to add dates and want to know if there is a way to add dates without having to create multiple calendars for each txt field on each userform. I would like it so that when I click on the calendar it would put the date into the text field it was launched from.

This is the code in the calendar which only puts the date into the field named Dat_Clsd.

Private Sub CMD_Close_Click() .....

View Replies!   View Related
Automatically Populate TextBox In UserForm
I have a userform that pops up upon opening a file. The user form has
5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".

View Replies!   View Related
Populate Textbox From Combobox In Userform
I need to populate the textBoxes from the selection from ComboBox I've created in a UserForm. I have attached the file that I was working on. I want to be able to keep selecting then populate the text box until I have finsihed.

View Replies!   View Related
Populate Textbox On Userform With Named Formula
A textbox on a userform is populated through cell references which have formulas. Works OK. I want to change this by getting rid of the formulas in the cells and have the textbox populated by a name. The following formula is entered in the "Refers To" box =DEGREES(ATAN(RADIANS(ATAN2(Sht1!$G$34-Sht1!$G$33,Sht1!$H$34-Sht1!$H$33)))*(LastDep-Sht1!$G$33))+Sht1!$H$33
The name is "TopLine" (without quotation marks) When I enter =TopLine anywhere in the worksheet, it gives me the proper answer. I have been trying to populate the textbox with "TopLine" but without success. I tried a listbox but that doesn't work either. I have exhausted the search possibilities (I think).

View Replies!   View Related
Populate Userform Textbox From Another Userform
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.

The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.

I want the textbox (output) to be populated at "Userform intialize" event.

I have tried various other methods without any success.

View Replies!   View Related
Calendar Value Using Data From A TextBox
I have a Userform that has a TextBox named TextBox5 when double click, it opens a calendar form. When the calendar closes it places its value into TextBox5.

View Replies!   View Related
Calendar Date In Textbox
I have a form where i need to enter date in a textbox from a calendar.

I have created a calendar which opens on clicking a button adjuscent to the textbox.

Now I am not able to enter the selected date from the calendar into the textbox.


View Replies!   View Related
Move Value From Calendar 12.0 To Textbox On Sheet
I understand how to create a basic function and call a function so those things are there. What I am looking at doing is taking the value of the calendar control and placing it in a text box, say TextBox2 for instance. Right now the calendar control is called when the text box has focus and the calendar closes Unload Me when the day is clicked though I don't know how to make the textbox value equal the calendar value.

This is something I am sure is pretty simple though I just can't get it to work. The calendar control is on a userform and the text box is on the active sheet so this is where i am running into trouble i am thinking.

View Replies!   View Related
Userform Textbox Event That Fires After I Exit The Textbox
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View Replies!   View Related
Save File Name From Textbox & Calendar In Form
After a bunch of false starts I am not getting very far and after searching the message board have failed to come up with the right clue.

I am trying to create some vba code that would use input from a form to create a file name that would save the file in the current folder.

e.g. Foghorn Leghorn expenses Aug 10 2008.xls

I am using calendar control named “calendarFinal” and a text box named “txtName” . The text box to show the user the suggested file name is txtFileName.

Among other things, the date from the calendar control gives a date like 08/08/2008 and I suspect that the slashes are going to give me grief.

A confirmation message box would be nice. (vbOk?)

View Replies!   View Related
Populate Textbox From A Combobox ()
It's a customer form where I need the contact person (txtContact) to be filled out when selecting the customer (in the cboCustomer).

The data is listed on the sheet "Customer", where all the customer names are in column from B2. The contact names are from C2 in the same sheet.

I have made a list in the namemanager called Contactlist (=OFFSET(Customer!$C$2;0;0;COUNTA(Customer!$C:$C)-1;1)

I have this VBA for getting the customer to the cbobox

View Replies!   View Related
Populate Textbox Using Combobox Info
I have a userform with a combobox and a textbox, I would like that when I click the dropdown on the combobox I can pick an item from a list found on a spreadsheet in column A. This spreadsheet has two columns of data A & B. I would like to automatically populate the textbox with the data (from Column B) based on what was chosen in the combobox for (column A).

Example
A B
Don $5.00
John $6.75
Jerry $4.75

If I was to pick John in the combobox, I would like for the textbox to populate with $6.75.


View Replies!   View Related
Populate Textbox With Last Used Cell In Range
I have a userform with multiple textboxes and comboboxes, the contents of which are saved to a database sheet, each time on a new row. Everything else is now all set but I still need to create a unique id number for each entry. I set the value of the textbox in question to the last cell value in the id column incremented by 1 in the userform_initialize but for some odd reason it doesn't work. However, if I use a direct reference to a cell it does work. Here's my
Private Sub UserForm_Initialize()

On Error Resume Next

txtRahtikirja.Value = ""
txtPvm.Value = ""
cboRahti.Value = ""
txtTavVast.Value = ""
txtOsoite1.Value = ""
txtOsoite2.Value = ""
txtKasittelyPvm.Value = ""
txtKasittelija.Value = ""
txtLahettaja1.Value = ""
txtLahettaja2.Value = ""

View Replies!   View Related
Populate Textbox On User Form
File attached

1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine

2) I have a second form which should do 2 things:
a) On the bottom half of the form, select people from sheet 'Staff'. Works fine
b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well

The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine

View Replies!   View Related
Populate TextBox From A Multi-Column Combobox
I am creating (or aim to create) an Excel based database. (Excel 2003)

On sheet 1 ... I have a userform ... most things are working okay so far.
On sheet 2 ... I have a number of NAMED lists to use in combo boxes etc

One named list is two columns wide .. it is called "ParaNo" its range on sheet2 (not including Name header - which is in a merged cell acrosss both columns) .... is B3:C35

Column B3:B35 contains the numbers 1-33 sequentially
Column C3:C35 contains a text phrase that relates to the number opposite in column B

On the user form I have a combobox ("CbAdjParaNo") that has "ParaNo" as its row source, what I want to do is populate a text box (TxAdjParaDef") when a number is selected in the combobox

View Replies!   View Related
Populate Cells With Contents Of TextBox Controls
I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the

With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value
MsgBox "Cycle " & i
Next i
End With

The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!

View Replies!   View Related
Populate Form After Selection Of Row In Textbox
What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....

I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.

Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
Private Sub DateBox_Change()
DateBox = Format( Date, "yy/mm/dd")
End Sub.....................................

View Replies!   View Related
Copy From Textbox To TextBox In Another Userform
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?

In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.

I was trying to guess the code... but it is not working...:

UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value

View Replies!   View Related
Userform - Calendar Drop Down Box
I am working in a userform and I need to find out how I could set a field for date and have a calendar drop down in it?

View Replies!   View Related
Default Date In Userform Calendar
In the attached file I have put together a userform that contains a drop down calendar in order for users to select relevant dates.

I have two questions:

1 - I've noticed that from creating the userform (04/01/10) the date has remained as this and not updated to the "current date". Is there any way this could be achieved?

2 - Is there any way the code etc. could be manipulated to alter the dates in the Date Entry boxes, based on that entered into the "Rostered Start Date" box.

I.e. If a user was to select 09/12/09 in the "Rostered Start Date" box, the other date boxes would automatically change to that date.

View Replies!   View Related
Retrieve Two Dates From UserForm Calendar
I want the user to select a date from a calendar and insert a new sheet if a new date has been selected otherwise display the calendar again; then get the user to select a 2nd date and use this is in a Vlookup formula:......

Show the user the calendar Record the value Format it and check it against existing sheetsIf it doesn't exist, insert a new sheet ( name = date)If it is already present ask the user to enter another date and present the calendar to them againShow the user for the calendar for the 2nd dateRecord the valueCheck it against existing sheet names (names = dates) - it needs to be a valid date = sheet nameIf it's valid, use it in the vlookup formulaIf it's invalid, warn the user and display the calendar againOnce 2 correct dates are entered, I have a routine that then runs fine ....

I'm getting very lost in when the routine 'SheetAlreadyExists' and 'InsertNewSheet' should run (ie before/after each other etc.)

View Replies!   View Related
Make Calendar Visible And Invisible In Userform
I have put calendar in my form and I want it to be visible only if I click on the combobox and make it invisible when date gets filled in the combobox.

I wrote the following code but it gives me runtime error -2147417848(80010108) Automation error :The object invoked has disconnected from its clients.

View Replies!   View Related
Userform Which Allows User To Select A Date Form The Calendar
I have a userform which allows user to selected a date formt he calendar. In my code I name the value selected myDate. I want to have a line of code at the begginning of my code that checks if myDate = a date already listed in column H on a sheet named "all dor's". if it does match then a msgbox appear saying "date already entered" and the code return to the opened userform.

View Replies!   View Related
Set Date Through Calendar In The Userform Text Boxes
I have a userform and a calendar form, on the user form I have three text boxes named (txt1, txt2, txt3) and three buttons named (cmd1, cmd2, cmd3).

PROBLEM:
when I click I cmd1 button the calendar form opens and after selecting the Date from calendar, the value of the calendar assign in txt1.

the same for cmd2, cmd3

View Replies!   View Related
Enter A Value In A Textbox, Search For It In An Worksheet, And Populate Other Textboxes With Adjacent Values If The Value Is Found
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.

Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value

I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...

View Replies!   View Related
Populate Information Into A Userform
I am searching a database for a particular date and want the data corresponding to that date to be populated into a userform. So in short I want the data to be displayed in the userform. I am looking for ideas on how to do this efficiently. I currently do it with a list box, but it is only able to display one column of information. I hope this is clear.


View Replies!   View Related
Populate A Combobox In A Userform
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"

View Replies!   View Related
Clear UserForm Controls, Or Populate
I have this UserForm I need to clean-up but can't figure proper ways of doing it.

There's 2 ways to call the Form:
1) The main Sheet has a Command Button that calls the blank Form, which allows the user to enter & select data to be submitted to the sheet (using combo boxes, etc.).

2) If the user wishes to modify an existing entry on the sheet, he must click on it. This will call the Form which will be populated with the existing data on the sheet (per Row, since the Form enters data one Row at a time).

My problem is that I can't figure a proper way to Initialize my Form to either be blank (as for option #1), ie. have no pre-entered or pre-selected data in it, or to be filled with pre-existing data from the sheet (#2).

I tried to handle this by setting my ActiveCell = A1 when my CommandButton is pressed and check it when Initializing the Form (to initialize for #1 instead of #2), but that's totally not working.

View Replies!   View Related
Populate Userform With Items From Drop Down
I would like to populate the captions of checkboxes in a userform with the items listed in a drop down menu located in cell A1. Lets just say I don't know exactly how many items in the dropdown there will be, but I do have an estimate number. Maybe between 20 and 25.

View Replies!   View Related
Populate Userform With Search Results
I am trying to populate a UserForm with data from a spreadsheet using a search function instead of just providing a Next and Previous search function (which works). The following code is able to search for and select the correct row on which the data resides.

Private Sub cmdBlankFind_Click()

Dim FindMe As Variant, FindCell As Range, FindCell2 As Variant, Data As Variant
With Range("BLANK")
FindMe = InputBox(Prompt:="Please enter search criteria:")
Set FindCell = .Cells.Find(What:=FindMe, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
FindCell.EntireRow.Select
Data = FindCell.Value
tbxBlankAccount.Value = Data(1, 1)
End With
End Sub

View Replies!   View Related
Auto-populate Userform From Course List
Some Background info:
This is my first post! I am a total novice when it comes to VBA in Excel (but I'm a fast learner!), so please bear with me if my question is either obvious or easy (or if this is a question that's been asked 14980213 times already). I have some programming experience, but all in C or C++, not in VBA--this makes the project challenging. I also have to hand this off in a few months and trust that it'll never break, ever--more challenging.

I'm trying to make a Participant Tracking System for some workshops we offer. The intent is to make a userform so that an administrator can input all the information for the participant in question. One important question on the form is which course the participant intends to take; the snag is that the current list may change over time.

The Spreadsheet is set up with Course headings starting at R8C8, and continuing across for all 16 courses we currently offer. The data for the participant is entered into Rows 1-7, and the date they completed the course in the appropriate column for that course. There are some formulas in Rows 1-7, the important one here counts up the number of classes currently offered.

So, below is the code i'm trying to use, at least to start. I am making a combobox that has all of the available classes.

Private Sub UserForm_Initialize()

Dim ClassList() As String

'R5C6 contains a formula that calculates the number of classes offered. The value is currently 16
Redim ClassList(R5C6)

iCount = 0
y = 8

Do While iCount > R5C6
'R8C8 is where the class list begins.
'It continues horizontally along the rows for the 16 titles offered.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
y = y + 1
iCount = iCount + 1
Loop

With ClassListBox
.Clear
.List = ClassList
.ListIndex = -1
End With

End Sub

I used to have a line that replaced the following chunk.

Range(R8Cy).Select
ClassList(iCount) = ActiveCell

It read

ClassList(iCount) = R8Cy

and did nothing for me at all.

When I initialize the userform, I get a blank combobox. It doesn't do what I want it to do, but that's probably because I'm telling it to do something weird.

View Replies!   View Related
Populate A UserForm- According To The Row The Cell
I have some textboxs and some comboboxs, on a user form I want them to populate according to the row the cell is selected on.

Example:

cell c15 is selected,

UserForm1 Textbox2 populates with value of A15
UserForm1 Textbox1 populates with value of D15
UserForm1 Combobox2 populates with value of F15

And is the user changes a value I need it to update the cell.

View Replies!   View Related
Populate UserForm From Offset From Found Value
What I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.

I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.

I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:

Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub

(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)

I have attached a small selection of my workbook where I have set up the userform and named the labels.

Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.

View Replies!   View Related
Userform To Populate Data With One Field
was having a look and cannot find the question to this answer.

1,what i have done is made a workbook with a user form to input data (customer id is the unique record)

i now want to create a form where i can put the customer id in and tell it to show me that customers details and i can edit.

i have various textboxes/ combo boxes/ check boxes in the input form and i want all these to be included on the review form (for updating and changing the existing data).

2, also if possiable i will add a sheet with dates for deadline to cancel, can i get this to show on the new input form is it is to late to cancel?

View Replies!   View Related
Populate Userform From Dynamic Table
I have a userform to be populated with data from a dynamic table for purposes of showing users their daily stats. The data is populated on the worksheet in the following way- ..............

When the userform is pulled up, it needs to show the following details -

UserName - User1
Workitem 2 : 12
Workitem 3 : 7

As the work items go all the way to 65, I wanted to only show the work items that had actually been worked on by each person - What I am struggling with is how to populate the textboxes on the userform with this data - without getting into an absolute mess of if statements -

If Range(WorkItem1Range).Value <> "" Then
userformStats.WorkItemA= Range("a2").Value..........

View Replies!   View Related
Populate UserForm TxtFields On First Open.
Worksheet1 has data, with a cmdButton that opens a UserForm. When the UserForm opens, some txtFields(in the UserForm) are populated based on the data from Worksheet1. The issue is, if we change the data on the worksheet1, we have to open and close and open the UserForm to have the txtFields populated.

View Replies!   View Related
UserForm Controls To Populate Certain Cells
I want to create a user form to allow users to put in 26 values and then have the values populate certain cells within the spreadsheet.

I have attached a sample, I know how to create the form, I'm just not sure of the coding I would need to use?

View Replies!   View Related
UserForm To Populate Worksheet Records
I've found a great userform on this site that allows you to populate a datasheet as well as delete or amend datasheets. It was by dodger7 within Database. Very useful. I've adapted this to my needs and it works great apart from i cant amend the userform that shows data when you select delete or amend. I've had a go but don't understand how i can create my own feilds and set it up in order. When i go in to the code i can veiw the delete and create/amend userforms but this is a search function relating to a reference number. Once you select Find it brings up another form and that is the one which i need to adapt to show my new feilds. I have attached the sheet so you can see my problem. I was wondering if anyone can advise as i love this userform/database method but can't complete the changes to my needs.

View Replies!   View Related
Creating A Database On A Worksheet To Populate A Userform
I am working on a label printing set-up for my work. So far I have completed the userform that formulas will be entered on and printed from. I had an idea of being able to save these formulas for recall later. I included “Save” and “Recall” buttons on the userform. My plan is to have my co-workers click on the “save” button and be able to enter an additional piece of data and have everything saved to another worksheet labeled “database”. If you look at the said sheet you will see a column for “customer”, “color” and then the colorants. Due to the wide variety of colorants and quantities available, I set it up so that I have the colorant and under that Oz and 48ths. I am trying to figure out a code that will populate that across the row.

Then I want to be able to push “recall”, find my customer and then color in a combobox and have that populate my label.

At this time I am stuck. Part of my problem is I don’t quite know the terminology to google.

Attached is the file I am working with. The only sheets that need concern anyone are "main" and "database". The others are from the original file and I will be deleting those once I am done.

View Replies!   View Related
Populate USerform Based On Search Query
I have a userform that I use to enter fault calls and it saves in to a spreadsheet.

I want to develop the capability to be able to have a form that Will search a pre-existing call and then when it finds it to bring up the main userform and populate it with existing details so that the user can amend them if reqd and save back to the database.

So what i want.

Userform - New Call
Userform - search existing call

I want to open 'search existing call' userform, be able to search based on one of the following: callrefnum, fault_type, Call_logged_by

Once the call is found - it should be displayed and then on double click it shd open up in the main userform 'New Call' with all existing details populated.

View Replies!   View Related
Populate UserForm Controls With Worksheet Data
I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?

View Replies!   View Related
Populate Separate UserForm From Row Of Selected Listbox Item
How do I populate a new userform from an entry selected in the listbox. The listbox only lists one item from the original table but I'd like to populate the new userform with related information from the same row.

I'd then like to save this information to a new sheet and store the original information on another sheet leaving the first sheet a table of information yet to be updated.

The attached workbook should make things clearer. The update button is the one in question.


View Replies!   View Related
Userform Textbox Value
i have a tabbed userform, that has 13 text boxes on each ,

how can after i have updated one tab unload to a specific cell in excel ?

textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8

etc etc

but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks

also is there a way to when this sheet is opened this userform is shown

View Replies!   View Related
UserForm – Data From TextBox To Cell Then Cell To TextBox
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.

View Replies!   View Related
Userform Textbox Formatting
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".

The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input.
example: (MI) A000-000-000-000

The next textbox Field (TextBox10) I need to end up with this type of result:
example: (MI ID) A000-000-000-0

I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.

View Replies!   View Related
Userform Textbox Code
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.

View Replies!   View Related
Current Userform TextBox
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.

My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.

Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.


View Replies!   View Related
Userform Textbox/commanbutton
I have textbox1 and commandbutton3 in userform.

Commandbutton3 has the below
[code]
Private Sub CommandButton3_Click()
x = Application.GetOpenFilename(FileFilter:="Excel Files (*.xls), *.xls", Title:="Choose File", MultiSelect:=False)
MsgBox "You selected " & x
End Sub
[code]
1. I would like that commandbutton3 to be only visible if the user selects textbox1

2. When user clicks on commandbutton3 and selects the file, I would like x to populate textbox1.


View Replies!   View Related
Userform Textbox Formatting ..
I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.

What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").

If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.

View Replies!   View Related
Copyright © 2005-08 www.BigResource.com, All rights reserved