I am trying to build a Calendar that pulls all of it's entries from data submitted via user form. To be more clear, I built a basic user form in VBA where I can submit this data: name, brief description, Time/duration, and date. Instead of the data I enter into the form populating in specific cells in my Excel workbook, I would like for the information to be populated into a calendar based on the date.
View 1 Replies
I am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I
I need to repeat this for rows 4 through 63
I was trying to use the following code, but cannot get it tweaked right.
[Code] .....
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
I am trying to have the calendar in the second tab of the attached excel file to auto populate based on info in the first tab.
In the first tab, there is the start and end dates of certain projects. The calendar will need to only show the project name of every project being worked on that specific day.
Some days will have more than one project being worked on, the Calendar will just need to list them all under that day. The Start and End dates count as days the project being worked on as well. We will also need the calendar to auto update whenever we modify the dates in the first tab or add/remove projects (rows).
Looking to create a calendar in excel and auto-populate the content with specific fields I enter. I know how to create an excel gantt chart but I'm really looking for a calendar view instead of a series of columns with dates. I reviewed the original post on Auto-Populating Excel Calendar but was confused by the instructions. (1) create a calendar in excel and (2) show me how to populate the calendar with fields like (dept and project name) into the dates on the calendar? I have two dates that are important (a due date for the project and when that project will be published). Is there a way to have both dates show info otherwise the most important date will be the publish date?
View 1 Replies View RelatedI am trying to use VLOOKUP to auto-populate a description from an entered part number. After checking up on how to do this in several different places I applied this formula to the relevant cell but all that it returns is #N/A.
I am very confused as all seems to be correct, but I am new to this and I am sure I am missing something silly. :P
On entering a part number into cell C13 on sheet 'Stores Receipt' it should search and find that number in column A on sheet 'Product List', it should then return the adjacent description from column B on sheet 'Product List' and show this in cell C17 on sheet 'Stores Receipt'.... Sounds simple hey! :D
The formula used is:
For Example...
In Excel:
Question Answer
What is his Name? John
How many apples did he buy? 8
How much did the apples cost? 50
In Word: John is in cell b2, 8 is in b3, 50 is in cell b4
John bought 8 apples totaling $ 50 dollars.
Based on the information typed in the answer column (excel spreadsheet) I would want a word document to automatically generate a sentence.
I have this code inside a userbox to auto populate a textbox on the same form, the combibox info is located on row E, and it populates the textbox with info off row G, but how can I change this to pull the info off row C instead of G???
Code:
Private Sub ComboBox1_Change()
var1 = WorksheetFunction.VLookup(ComboBox1.Value, Worksheets("Basic").Range("E11:G90"), 3, False)
TextBox1 = var1
End Sub
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
How to design a form in Excel and populate data into the combobox, using existing sheet name?
View 3 Replies View RelatedI have searched and found many examples of code that will lock cells once data has been entered. But for some reason, I cannot get it to work in my workbook. The weird thing is, I have successfully got them to work on blank workbooks. I unlock a range I want people to be able to edit, I protect the workbook, I enter the code, and it works. But I do the same thing on my workbook, nothing locks.
I've tried locking all the cells on a sheet, and only unlocking a small range, as in the examples (A1:A10), and I cant get it to work. I've tried not pre-protecting the sheet, I've tried 4 or 5 different examples of code. If it wasn't for the fact I've gotten it to work on blank workbooks, I'd think VBA was disabled or something. I can't post a copy of my workbook for you all to look at because its on a stand-alone computer at work (and the USB is disabled for info-sec).
Excel Version 2007
I have 5 columns: A, B, C, D & E of which I have drop downs for: Yes, No, Maybe, Not Sure for A, B, C, & D. I need column E to offer a hyperlinked mailto:ask@bob.com when A, B, C have Yes, Maybe or Not Sure selected. If Yes, Maybe or Not Sure is selected for D, I need to have a hyperlink mailto:ask2@bob2.com. When no is selected for any of them, I need to have it say None.
View 9 Replies View RelatedI'm trying to auto populate a calender style sheet in Excel 2010 based on data from a Work Schedule sheet. The work schedule sheet contains a list of jobs, with each row representing a different job. There is a column for the start date (e.g. 25/04/14) and a column for the end date (e.g. 26/04/14). There are other columns which select resources such as people and vehicles. Each resource may appear on any one of several columns for each row, e.g. Site Operative 1, Site Operative 2 etc.
On the calendar sheet, in which one cell represents one day (e.g. 25/04/14), all the dates are shown along the top going right and all the resources are shown on the left going down.
On the calender sheet, in every cell I want a formula that will look at the Work Schedule sheet and see if that particular resource is being used on that particular date. If it does, the cell can display information from another cell such as the job number or job name to which the resource is assigned; if it doesn't, the resource isn't being used so it can display "Free" or "Available".
I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.
Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub
I'm trying to figure out a way to populate multiple cells automatically with certain information after entering info into a single cell on a separate worksheet in a separate workbook.
Our "master" sheet has 22 total columns (A-V), and our weekly "status" sheet only has 7 total columns (A, E, P, L, M, N, R).
Column A on both sheets is labeled "Sample Number". On the "status" sheet I want to be able to type, for instance, "2012-228" into A2 and have the corresponding values from Columns E, P, L, M, N, R on the "master" sheet automatically populate into B2-G2 on the status sheet if this is at all possible.
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make matters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
creating an Excel invoice that would auto-populate from another Excel worksheet or file with data. The information that I would want to include are:
Company name
Name (person)
Email address
Start date
End date
Promotion description
Number sold
Price per item
Total charged
How to populate MTD data linked to the other spreadsheet file (monthly data) to the table on the left, depending on the month selected month from the dropdown list.
Attached files for reference :
Dropdown Month.xlsx
MONTHLY DATA.xlsx
I need to have cell data on sheet 1 to populate cells / rows on sheet 2 when the data is sorted on Sheet 1.
So let me explain: I have workloads on each row in Sheet 1. Column A has a list of people that I assign to each workload. After assigning a name in Column A to each row, I sort Column A by the user to print out only their workloads.
Currently, we have a paper worksheet where they manually write in their workload. I have replicated this worksheet on Sheet 2 and was wondering if I could use the data in Sheet 1 after being sorted by user, to populate the worksheet on Sheet 2 ?
I have attached a copy of a spreadsheet that I am putting together, What I need to achieve is, when a date is entered into the completion date cell the daily count down in the days left cell stops but still shows the value in that cell. The Annual or Monthly cal tabs are the ones i need the formula for.
View 5 Replies View RelatedI have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I am trying to create an easy fill spreadsheet for a game. I am looking to have data values auto fill based off of the entry of 2 prior drop down menus.
I would like to have values for "Move", "Str", "Spd", "Skill", "Armor", and "Value" auto populate after the "Race" and "Role" has been selected. Data for these auto fills I have put on Sheet2 while the main file itself is on Sheet1.
If possible I would like to have Value increase by 5 for every level in "Rank" on the sheet.
I have two worksheet. One worksheet is a form where in the Field Door No. should be a dropdown list. The list will be retrieve from worksheet Source. Now upon selecting a specific Door No. it should also autopopulate the respective Type, Brand, Serial No., and Type.
First thing i need to know is what should i do on Cell B1 worksheet Form for it to be a drop down list retrieving the Column A on worksheet Source.
Second, upon selecting for example ATC0009 on the drop-down, it should auto-populate like these
Door No. ATC0009
Type AT Crane
Brand A
Serial 43679
Type Crane
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
the post 5 for the actual issue. This being my first post could not update it correctly. I have put my views int he 5th post which will be more clear.
View 9 Replies View RelatedI'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I am using Excel 2007.
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies View Related
