Copy Non Zero Formula Results
Sep 4, 2007
I have 4 source workbooks and a master workbook which is linked to the source workbooks, if the source workbooks have no value in specfic cells the master workbook which is linked to it shows a 0 (not a problem). Now if I want to copy only cells which have a value other than the 0 to the end of used rows on another sheet on the Master workbook using VB I run into a problem because it sees 0 as a value and copies as well.
The issue is how do I stop the 0 showing and not being seen as a value. This 0 shows regardless of format.
View 9 Replies
ADVERTISEMENT
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Jun 13, 2014
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies
View Related
Feb 19, 2009
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
Go to worksheet z and press the command button.
I got the code from this site: ...
View 6 Replies
View Related
Feb 7, 2014
I have a report that is run weekly that shows items that have been returned over the last 3 months. The report shows the original date of purchase and the return date, but not the number of days since the purchase and the return. I need to have any items that were returned over 15 days go to a new sheet and display just those rows of information.
View 8 Replies
View Related
May 4, 2014
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
View 5 Replies
View Related
May 9, 2006
I have a range that has formulas that are based on other fcells outside the range.
What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.
There could be a marco to run when this process is needed.
example attached
View 9 Replies
View Related
Jul 27, 2006
I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.
View 2 Replies
View Related
Aug 24, 2014
I am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx
View 3 Replies
View Related
Jan 7, 2007
attached the file. Sheet1 & Sheet2 are the "Source" sheets and "Summary" sheet is the "Target" sheet.
1) Macro "TopParts1" filters the Top 80% (Column B) in Sheet1 and copies this to A1 in the "Summary" sheet.
2) Macro "TopParts2" filters the Top 80% (Column B) in Sheet2 and copies this to E1 in the "Summary" sheet.
What I am hoping for is to combine the macros 1) & 2) so that the Table as
shown in "Summary2" sheet is done in one instance. The highlighting is just for illustration. Presently I need to select sheet1 rum the 1st macro... select sheet2 run the 2nd macro. Not very efficient. One table for 1 macro would be excellent.
View 5 Replies
View Related
May 29, 2009
To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
View 5 Replies
View Related
Oct 1, 2009
I have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
View 4 Replies
View Related
Nov 6, 2006
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats)
Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents)
Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
View 11 Replies
View Related
Mar 18, 2010
I have several macros that join spreadsheets and then sort and subtotal them. I now need to use my spreadsheet that has the subtotals and place only the subtotals into a new workbook. For instance the new file should contain the name of the item and "subtotal" for that item, and the list of all the data should remain in the original file.
View 9 Replies
View Related
May 31, 2013
I have this macro which does a really nice random selection, the problem I have though is that it deletes everything except for the result set. How to adjust the macro in such a way that instead of deleting the the original data, it copies and pastes the result set to a new worksheet?
Code:
Sub RandomSelect()
Application.ScreenUpdating = False 'disable screen updating to avoid screen flashing
Application.DisplayAlerts = False
Dim wbk1 As Workbook, wbk2 As Workbook, lstRow As Long, wks As Worksheet, startCut As Integer, selNum As Integer, lstCol As String
Set wbk1 = ActiveWorkbook
Set wks = wbk1.ActiveSheet
[Code] ......
View 1 Replies
View Related
Dec 10, 2009
I would like if someone could tell me what formula to put in the cells in Column E so that I can copy it to all cells in Column E and get the right results.
Here are the results I need: ....
View 9 Replies
View Related
Sep 3, 2007
I wonder if someone has a clever solution for the following, I have a spreadsheet where I have done subtotal on some of the figures, does anyone know how I can copy (and paste into a new sheet)only the rows where I have a subtotal?
View 8 Replies
View Related
Oct 16, 2007
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
View 7 Replies
View Related
Jan 29, 2008
The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.
Sub AUTOFILTER_withouthead()
' AUTOFILTER_for_drop Macro
' Macro recorded 1/27/2008 by DD
Dim ws As Worksheet, wd As Variant
Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value))
Set wd = Worksheets("Destination").Range("A1:F65000") ...
View 3 Replies
View Related
Mar 19, 2008
I've got a bizarre problem here. I've been working on a piece of code and one line has started behaving erratically: Sheets("BLANK SCORE").Copy after:=Worksheets(Worksheets.Count)
I want to do is create a copy of the sheet called "BLANK SCORE" and copy it after the last sheet in the workbook. This code is part of a loop that runs a maximum of 10 times (potentially creating 10 copies) and I've had inconsistant results such as:
*) Code works and copied sheet is created (desired result)
*) Code is ignored and no copied sheet is created (shouldn't do that)
*) Sheet is copied to a new blank Workbook (...huh ?)
I've also tried changing:.........
View 2 Replies
View Related
Sep 24, 2009
I use the Macro below to search in a datafile and copy the results into another worksheet. Only problem, when the macro finds a result he should copy and start over again, starting from the row below, but somehow he start 2 rows lower, so I'm missing results. (when he should copy row 2,3,4,5,6 - the result is only 2,4,6) I tried changing
WerkRij = WerkRij + 1 into Werkrij = WerkRij
StartRij = Rij + 1 into StartRij = StartRij
but then he keep searching and copying the same cells
View 2 Replies
View Related
Jul 1, 2013
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
View 2 Replies
View Related
Feb 22, 2014
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code:
Sub CalculateDeviceFailureTimes()
'
' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System
'
Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
View 3 Replies
View Related
Jun 12, 2009
Is there to copy my vlookup results into another workbook?
I put together a marco that will select an range and paste it into a new document, however my vlookup results will not copy over.
Is there a way to extract my vlookup results and paste it into another workbook with the enclosed vba code?
Private Sub CommandButton1_Click()
'
' Macro2 Macro
' Macro recorded 4/24/2009
'
Columns("A:E").Select
Range("A2").Activate
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Aug 20, 2006
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A
row 1 ABCDE
row 2 FGHI
row 3 Party Name:Abcd
row 4 JKLM
row 5 nopq
row 6 STUV
row 7 Party Name:ryz
row 8 Party Name:mno
row 9 XYZ
I want the results as below:
Column A Column B Column C Column D
row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
View 9 Replies
View Related
Sep 2, 2006
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
View 4 Replies
View Related
Jan 17, 2007
now i have filtered data in a table, i want to use the results by printing off a table showing just these and the appropriate rows from other tables on worksheets. these all have a specific ID which is how they are traceable to each other. like a related field in an access database. two tables/worksheets are like so:
table1:
Reg No | Rank | Name | Initials | Troop | etc
table 2:
Reg No | JCLM1 | JCLM2 | SCLM1 | SCLM2 | etc
If i were to filter the second table by JCLM1 = YES then i want to create a printable list of all those but also to include the related records from table 1. is this possible?
View 2 Replies
View Related
Aug 9, 2007
I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough
The code is:
Sub GetWorksheet()
Dim filetoopen As String
Dim wb As Workbook
filetoopen = Application _
. GetOpenFilename("XL Files (*.xls), *.xls")
On Error Resume Next
View 5 Replies
View Related
Aug 29, 2007
I recorded a macro to perform an Advanced Filter. I then adapted the range to & LastRow. My question is, can this now be adapted to remove the Select so the sheets are not selected when this is run.
Sheets("CIT Results").Select
Sheets("Open Calls").Range("A1:I" & LastRow).AdvancedFilter Action:=xlFilterCopy, _
CriteriaRange:=Sheets("Open Calls").Range("N5:V8"), CopyToRange:=Range("Q50"), Unique:=False
Moderators, can you please edit the Thread title. It should be "Advance Filter From and To Non Active Sheet"
View 6 Replies
View Related
Jun 13, 2014
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
View 14 Replies
View Related
