There's this cell g3 on every shweet on my workbook that needs to be set manually each time and i'm looking for a way to input values on every sheet on this cell,and i dont want to have to do it each time by scrolling through the worksheets.
What can i do in order to minimize the effort?
I have copied a data to another sheet. but when i change the data, the copied cell does not change...
View 5 Replies View RelatedI have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View RelatedI have 32 schools monthly report and I have to change Dates on each page at the end of every month. change the dates at once on each sheet..I have highlighted the dates that need to be changed.. though I have the sheets in word rather than in excel..
View 7 Replies View RelatedI am building an excel folder with 200+ work sheets in it. there is a master sheet which i collect the rest of the data for the other sheets. My problem is, is that i want to be able to change the sheets quickly on the master sheet when i copy and paste or drag down. The formula that i am using in the cell on the master sheet is =SUMIF(sheet18!$B$4:$B$30,"rd1",sheet18!$E$4:$E$30)
Is there a way to quickly change the sheet from 18 to 19 to 20 and so on, or do i have to go into each formula and change it manual??
i answered another q. here
http://www.excelforum.com/excel-work...excel-sss.html
but op wants to only change specified fonts on all worksheets to ariel and leave others intact.
The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
=VLOOKUP($B6&O$4,A159CLE!$1:$65536,4,0)
Stores: 183
1
1
2
2[code]....
Code:
Sub TabColor()
Dim mySheets As Worksheets
Dim mySheet As Worksheet
Set mySheets = Worksheets(Array("sheet1", "sheet2"))
For Each mySheet In mySheets
With mySheet.Tab
.Color = 9
End With
Next
End sub
I'm getting a type mismatch at line 4. Can I not group the sheets like this? This is just a test program, my real one would have 10 or more tabs in the array.
I have workbook #1 sheet1 that is linked to a master workbook sheet1. The master workbook has a bunch of sheets. I need to make copy of my sheet1 in workbook #1 and change the links from a sheet1 in my master workbook.
So for example, if my worksheet in workbook#1 is linked to master workbook in worksheet1 tab1, i want to make a copy of my sheet in workbook#1 but now have it linked to tab2 in the master workbook.
I know i can just highlight and do a find replace right? Is there a faster way to do this because i have a bunch of sheets.
I am using Excel 2003.
I tried to change the number of new sheets in a new workbook, e.g. from 3 to 1.
But the option has no effect on new workbooks. They still show 3 sheets.
compare data from different worksheets
For clarity, I have placed the sample datasets at the following URL
[url]
Given: the datasets for sheet1 and 2 might not contain the same number of rows.
I am looking for new rows (it might be inserted in any position of the rows) in sheet1. The new rows will be highlighted in red color. For example:
[url]
I'm experimenting a bit with this code. The idea is the following:
I've got one spreadsheet (ThisWorkbook) were I define 5 names for 5 worksheets in all files of a specific folder (c: emp). I get stuck at this line: "wb.Sheet2.Name = myval2", since I'm for some reason not able to activate the newly opened workbook and change it's name....
Sub wd_testing()
Dim I As Long
Dim wb As Workbook
Dim firstrow As Long
Dim sht As Worksheet
Dim cell As Object
Dim count As Integer
Dim myval2 As Variant
Dim myval3 As Variant
Dim myval4 As Variant
Dim myval5 As Variant
Dim myval6 As Variant
Application.ScreenUpdating = False
It's important to mention that there is no name conflict and the names work when entered manually.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I need to change VBA to Password Protect all sheets to allow user to select protected. I have:
View 2 Replies View Relatedi have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
I want to change the colour of rows depending on the letter that is in a column. I want it to do it over all the sheets of the document. In the G column there will be letters like 'W' and 'L' that signify something and I want to make it clear by changing the row colour fill. I've tried a few formulas I found by googling but they didn't work. I should point out that the letters are connected, so if I put a 'W' on the second sheet it appears on the first sheet as well.
View 2 Replies View RelatedIm trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I want to edit a cell's value without changing the formula the cell contains.
View 10 Replies View RelatedI get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets.
sheet1.jpg
sheet2.PNG
I know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
But Excel does not like the formula at all.
I'm a business/application consultant for ERP software, and generally pretty solid when it comes to excel. However, I've come across a question for a personal sheet that I can't seem to solve.
In my personal budget worksheet, I'd like to set a budget on a cell-by-cell basis. When the budget is hit, I'd like the text color (or cell color) to change.
I.E. Cell D14 has a budget of $200. When I enter $200 in the cell, the text turns from black to red. I've searched through google with no luck. I have mildly searched this forum, but haven't found my direct answer - I have come pretty close though, in other languages