What I need is to lookup the matching 2 key IDs (i.e., ISIN and Firm_Quarters) in Sheet2 and then return the variable (i.e., market cap) in Sheet1. I have done one manually highlighted in yellow.
View 4 RepliesI need to separate the text in "A" to "B" & "C", however, the length of "A" varies. Here's an example.
A
B
C
172.31.39.64 255.255.255.192
172.31.39.64
255.255.255.192
[Code] ....
I would like a formula that will take the info from 2 cells (not adjacent to each other or in the same row) and then look these up in a table giving the answer in the 3rd column somewhere else on the worksheet.
View 5 Replies View RelatedIn the attached sheet, i have data in 2 sheets in the same fromat. Both the sheets are seperate reports.
Coloumn A is the list of Team Ids, Coloumn B is the Ids of people who are assigned in the team. Sheet 2 also have the same details with changes in the people ID.
i am trying to find if the people IDs in report 1 is the same in report 2. i need a formula that will check if the people ID is matching to the same team ID as in report 1.. If its not the same, the formula should be able to show that.
eg :
In report 1, "197595" in coloumn B is against "4011-11341" in Coloumn A.
I need to check if "197595" is against "4011-11341" or some other number in report 2. If "197595" is not against "4011-11341" in report 2, it should show me " Miss match". if "197595" is is against "4011-11341" in report 2 as well, it should show me "match"Project match.xlsx
I have been working on this 2 weeks and have finally come to the conclusion. I am trying to use index/match to find an article number in any 1 of 3 attribute files workbooks. I have been am using Vlookup, but the Master attribute file workbooks DO NOT list the article number in column A (but list them in F) and therefore I have been creating an altered copy every month to place the article numbers in column A so VLOOKUP would work. Index/Match would be a more efficient look up formula as I could link directly to the Master Attribute files without altering the workbooks.
Below is the formula I have been using that looks in 2 attribute files workbooks
=IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)),
IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE)),"",
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE))),
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)))
Below are the three (the new formula would incorporate a 3rd attributes workbook "Other" to the search criteria) Index/Match formulas I would like to "Tie" together to find the article number in any of the 3 attribute files workbooks and return column A if the article number is present or nothing if the article number is not present in any of the 3.
=INDEX('C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!A:A,MATCH(A8,
'C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!F:F,0))
=INDEX('C:JDAAttributeFiles[PartAttributes.xls]PartAttributes
[Code] .....
what i am trying to do is look at an entire column, and see if that same date exists in the other Activity tab, if the dates match, then show the activity
here is the formula i am using, =IF($A9=Activity!$A2,Activity!$B2,"No Activity")
my problem is that i am only able to isolate one of the cells,, how do i check the entire column?
in other words, if i select two weeks, those two weeks of activity will show, if i select all weeks, all of the weeks activity will show, right now i can only get one of the weeks
my data looks like the following
1st tab
1/8/2013 - 1/14/2013
1/29/2013 - 2/4/2013
1/22/2013 - 1/28/2013
[Code].....
I have a column on sheet 1 which contains 200 lines with a unique number in each row (account codes). I have another sheet (sheet 2) which contains the same column. sometimes an extra row for an extra account code is added to the col in sheet 1. I need to make sure that the col I have in sheet 2 always has exactly the same as the col in sheet one, where the same account code should never be repeated. I am currently trying to setup a sheet where I keep all the checks and controls.
View 7 Replies View RelatedI'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
I have a custom data entry form which is working fine. The form completes customer data for reviewing at a later date. I have now been asked to change it so it will seperate the data in to customer's who require some documents sent out and some that dont.
Is it possible to have a combobox on the form and if the options on the combobox are Yes and No (original), when either option is selected the data will complete on to a seperate sheet for cases with documents required or documents not required?
I need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
I am having trouble using the MATCH function in my code. I am looking for a match in one worksheet from a cell in another. I have defined these cells and ranges as variables. However, it doesn't seem to be working with my application. I would like to find the row of the matching cell and use the output of the MATCH function to determine the next step in my code with an IF function. Here is my code. (NOTE: this is my edited code, I removed irrelevant pieces. The major problem is the MATCH function.)
View 4 Replies View RelatedI created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedIn my excel sheet, I have date values stored in cells from D7 ti IV7. in cells C8 to C100, I have a data validation which selects the values from cells D7 to IV7. When user selects a particular date in coumns C8 from the list, using my code, I am trying to search for the value stored in cell C8 within the range D7:IV7 using function Application.Match
While running the code by clicking on "Distribute Budgeted Efforts" command button, I am getting an error "Type Mismatch" and error is coming from code line number 27 which is "lInitial = Application.Match(lInitialdate, Range("D7:IV7"), 0) - 1"
My code is as below
Private Sub cmdEffortDistribute_Click()
Dim lCount As Single
Dim lStartDate As Date
Dim lCounter As Single
Dim lBudget As Single
Dim lInitial As String
Dim lInitialdate As String
Dim lInitialWeek As String
I am also attaching excel sheet which I am using here for reference.
I'm currently trying to get a Index Match function that finds a cell with given text in it, then returns a value that corresponds to a cell with that same text plus the word 'Sum'. I cannot use the offset function because the Sum cell appears at the end of an expense breakdown, and each category has different numbers of expense items.
Is there an easy way to do this?
I'm trying to perform an index / match lookup that can have a dynamic indexed column.
Sheet1 has the master table and sheet2 is where I'm putting the formula. The table on sheet1 has a RecordID field that uniquely identifies each record and that must be typed into Sheet2 [RecordID] column and then matched to sheet one to identify the record
Code:
MATCH([RecordID],Table1[RecordID],0)
The column headers on Sheet1 are used as data validation for the column [Field] on sheet2. The value of the Field column on sheet two should determine the the column on sheet1 to index.
This is what I have so far:
Code:
=INDEX(MATCH([Field],Sheet1!A:AQ),MATCH([RecordID],Table1[RecordID],0))
I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I have a monthly report. Worksheets for each month, each row is a type of fruit (column A), and the number sold (column B). A new worksheet is added each month with the information. I also have a Summary worksheet - running total of all months: Type of Fruit (column A), Number sold (column B), and Total of all fruits - number sold. I would like a formula for the Summary worksheet - to match that fruit (column A) to any of the other worksheets - matching the fruit (column A), and bring back the number sold (column B). (note some apples are Fuji and some are Honey crisp - those would be totaled together)
ex:
Tab = Jan 14
Fuji apples3
Bananas2
grapes9
TOTAL14
[Code]....
I would like to ask the user if when the name the worksheet the same as an already existing spreadsheet tabe if they would like to overwrite it or unload the user form.
I am not sure of two things:
1. how to find the already existing tab?
2. Once I find out how do I programatically delete it, so the code can continue
The code below works with the exception of the last section (trying to achieve the questions stated above).
I am using Excel 2010.
Code:
Private Sub CommandButton1_Click()
If TextBox1.Value = blank Then 'Need name for processing
MsgBox ("Name must not be blank.")
Exit Sub
End If
If Len(TextBox1.Value) > 12 Then
[code]....
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
My data is set out in columns, where alternate columns provide day numbers for given years (we can call these type 1 columns), with adjacent columns containing values which correspond to those type 1 column day numbers (we can call these type 2 columns). There are about a hundred columns in total (50 of each type). I would like to get excel to return the three largest numbers within each type 2 column, but I want to exclude data within the type 2 column above the point which is adjacent to a specific (varying) day number in the type 1 column. The location of this point varies for all the type 1 columns, according to a third row of numbers (the look up start point), which are currently listed below the dataset in every type 1 column. So, for the type 1 column "year 1", I would want Excel to ignore the values 0 and 1, which are listed next to day numbers 78 and 79, and begin looking for the three largest values down the column starting from the value which is adjacent to 81 (which is a 2). In type 1 column "year 2", excel would start looking for the largest values from the cell adjacent to 78, so it would ignore the 18 at the top of the column,and would return 2 and 12. And so on.
Year1
Value
Year2
Value
Year3
[Code]...
look up startpoint
81
78
62
83
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedI receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
I have a giant data sheet. I have to cherry pick certain data out of the list and send it to certain associates, in a new spreadsheet.
I want to do this automatically.
I can create the macro to select the data I want, and copy it over (values only), but I cannot find out how to do it in a new sheet with a new name that automatically gets generated with a unique filename (probably using the date).
Essentially, I want to copy my data spreadsheet (post-filter) into a new spreadsheet titled X mm-dd (where X is whatever I pick). I then want to delete several rows from it.
Ideally, the macro would do this (I will put a * next to things I can handle the code for, to save work):Filter Data *
Copy Data *
Create a New Spreadsheet named (Person's Name) mm-dd.xls
Paste Data (values, formats, column widths) to the new spreadsheet *
Delete Several Columns from the new spreadsheet *
Rename the sheet it's been pasted to
Re-filter data (new filter) *
Copy Data *
Paste Data (values, formats, column widths) to the same spreadsheet, only Sheet 2 *
Set the header of the spreadsheet with (Person's Name) and the date
Save the new spreadsheet
There will be as few as 1 sheet (in which case I would only want one worksheet in the new excel file), or as many as 4 sheets. I don't need a fancy way to do this, as it will only be done once a week, and I can just make the various cases required to do it even if it isn't pretty, but I can't figure out how to manipulate other files that haven't been created yet...
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View Related