Programmatically speaking, any way of checking whether an arbitrary cell is part of a named range (that is, short of looping through an entire book's named ranges checking for intersections)? (It can be assumed that all the named ranges consist only of one cell).
View 6 RepliesI have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....
View 2 Replies View RelatedI have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440
I need to check that the first digits (no mater how many) are all the same except the last digit.
I am trying to check the cells in column C for a defined set of rows and if it is blank change it to astericks.
Current is the row selected when the macro begins
LastRow is the last row with data (in column A)
For i = Current To LastRow
If Range("C" & i).Value = "" Then Range("C" & i).Value = "***"
Next i
I am using VBA to indent the values in a range of cells.
However, I would like my code to check if the label has already been indented, to prevent it from being indented further.
I want to run some macros based on the value of an input cell, but only if the input is a number (ie. it is not a letter or other character).
View 6 Replies View RelatedIs there any way through VBA that I can check whether the date in cell A2 is Monday or not.
Also the code should allow me to continue if its Monday else should promt a message saying that its not Monday and whether the user still wants to continue. If no it should terminate if yes the next part of the code should continue.
I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:
View 3 Replies View RelatedI want to reformat some data, arranged as follows, and ignore blank cells
Date1 Time1 blank Time2
Date2 blank Time3
to
Date1 Time2
Date1 Time2
Date2 Time3
Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out
Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub
Problem Designing "new customer" form, a textbox(forename) in the
form has the Control source of "B3" (an empty space in my Customer
database). When the form is run and the forname is typed in the box, it
fair enough appears in the Database sheet (in B3).
However, then when opening the form again and typing over the forename
just inserted it will ofcourse overwrite it (B3 is replaced). Any ideas how i can input
code into the sub linked to the textbox so that it checks the control
source and moves down if the source is empty(code checks B3 for text, moves to B4) then the next one (B4 is checked, moved to B5).
Dim topCel As Range, bottomCel As Range, _
sourceRange As Range, targetRange As Range
Set topCel = Range("B2")
Set bottomCel = Range("B65536").End(xlUp)
If topCel.Row > bottomCel.Row Then End
Set sourceRange = Range(topCel, bottomCel)
Set targetRange = Range("B3")
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
I have a master sheet that has 3500ish names on it, and another sheet that I'll need to drop in a list of about 1000 names. What I need on the master is a way to check the dropped in data, find duplicated names, and flag them up.
Now, I believe what I did last time was have a true/false method of telling me if they're on both sheets, then use an IF formula to instead make Trues into "yes" and Falses into "no". However, I can't for the life of me figure out how I had it previously checking both sheets and confirming/denying if they're on both sheets or only appear once.
i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 10 Replies View Relatedi have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 8 Replies View RelatedIs there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies View Relatedi don`t know how to make this in VBA
But please allow me to explain, if I have numbers in Cell F9 I want image to be displayed as (X <---- which it means wrong) on G9 and message to be appear in H9 says only words are allowed. In case, cell value are words; I want it to show image <---- which it means right) and the message to be say correct. And if cell is empty I want it to show image (!) and the cell beside it the message should say (Please Fill up).
I want to apply this to words instead of numbers as well.
I have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).
All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).
The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View Relatedif I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedI have some cells with specific names, I want to copy them and keep the names. How can I do this?
View 6 Replies View RelatedI want to go to places defined in a sheet.
the first works on my computer but not on another.
The second two do not work yet but think i am on the right track