I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 RepliesI have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies View RelatedAll it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies View Relatedi need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
I have a Choose function that is used to determine which range I need. e.g. =Choose(Choice,Cell,Cell,...).
In each corresponding "Choice" cell is a typed range. e.g. $B$33:$L$70
I'm looking for a way to be able to use this typed range as the range for some chart data.
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedI am trying to create report of the in and outs of tools we are shipping for repair.
Currently in Tab 1
Column F - Date shipped for repair
Column G- Vendor Name
Column H- Date Returned
What I need in Tab B
Vandor - Total Sent- In Repair @ Vendor- Total Repaired - Total Unrepaired
Here are Images if it makes it a little easier to understand
The Info I currently have
image1.png
The info I required filled out based on the previous data
image2.png
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
I am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
View 9 Replies View RelatedLet's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
How do I count values from a cell range in a cell range? For example I have 2 tables:
First Table:
Members
John A
John B
John C
[Code].....
I'd like to count the number of times John A, B and C appeared in the Who asked column. for this case, the sum should be 2.
Is anyone able to see where i went wrong, i am tring to make a function sumproduct using dynamic ranges. i can do the same thing using arrays which is simple(below), but not using ranges, below. the range is dependent on a the number of selected choices, hence the ubound.
View 8 Replies View RelatedI have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....
View 2 Replies View Related