Checking Cell Values

Oct 9, 2008

I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example

Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440

I need to check that the first digits (no mater how many) are all the same except the last digit.

View 3 Replies


Checking Single Cell For Multiple Values

Nov 12, 2013

I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:

Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid

When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.

View 10 Replies View Related

Checking Cell Values And Position On A Row And Setting Summary Value In Another Cell

Apr 8, 2014

I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....

View 2 Replies View Related

Checking For Values

Mar 2, 2007

I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,

If range(g & 2) = 5 Then
End Sub
End If

View 2 Replies View Related

Checking The Values Of The Autofilter

Jun 13, 2007

I am using the autofilter in my code.

Selection.AutoFilter field:=11, Criteria1:="reena"

Count = Sheets("ABC").AutoFilter.Range.Columns(1).SpecialCells(xlCellTypeVisible).Count - 1

In the field for of the worksheet 'ABC' there are some values. I want to sort the value 'reena' and save the count in the variable Count. But sometimes the value 'reena' is not available in the field 11. Then it gives error for the above Count variable.

How to check this? How to check that the autofilter value is 'null'.

View 9 Replies View Related

Checking For Similar Values In A Row

May 4, 2009

I'm trying to create a formula that would check if there are similar values in a row. How should I do this? There are 20 values in a row, and they should all be different (true). If similar values are found, it should give a warning or highlight the two or more cells.

View 9 Replies View Related

Formula For Checking Multiple Values?

Mar 17, 2014

The project I'm working on is for checking the measured Valve clearances on 4 cylinder motorbikes

They have 16 valves in all and I had made a spread sheet which has cells to enter the Min and Max Valve clearances for 8 exhaust and 8 Inlet valves they have different tolerances.

I have been able to do this part so I am at the point where once the valve gap min and max are entered for the exhaust and inlet valves on Cylinder 1 this changes all the min max gaps for all the other inlet and exhaust valves.

And once I have measured the gaps and entered the actual valve gap the sheet then tells me if the measured value is in or outside the valve clearance tolerance. And this is all working very well!

To save money on buying new shims which is what is used to adjust the valve clearance I swap as many shims that are out of spec on the inlet side to the Exhaust side and vice verse that will bring the valve back into spec.

Once a shim is found out of spec it must be removed, it's measured and that measurement is entered into the sheet and the sheet then tells me what size shim to replace it with to bring the valve gap back to as close to the centre of the tolerance as possible.

What I won't the sheet to do that I can't work out how is once all the out of spec shims have been entered I want it to check and tell me which shims can be moved to which valves to bring them back in spec! All valves are numbered from 1 to 16 and cylinder number exhaust and inlet valves.

View 14 Replies View Related

Conditonal Formula Checking Two Values

May 7, 2009

Basically what I have is a spreadsheet that checks peoples average case count at the warehouse I work at, problem is that the source of information I use doesn't factor out breaks so I need to do this with if statements. see below.

View 2 Replies View Related

Checking If Values In One Spreadsheet Exist In Another

Feb 4, 2007

I have a 'master' spreadsheet containing over a thousand filenames. I have been given another spreadsheet with just a couple of hundred filenames on it and have been asked to find out if the filenames on this 'small' spreadsheet appear on the larger/master one.

Is there any way (by formula or by macro code) that I can do this easily? What would be great is some way of Excel colouring in the filenames on the 'small' spreadsheet that also exist on the master one.

View 2 Replies View Related

Checking / Unchecking Existing Values In A ListBox

Nov 5, 2012

I have a Multi Select ListBox with values from a range of cells.

I wish to automate the selection of one or more existing value(s) via VBA code so when User views the List, The check mark is visible. This will alert them to Active values.

i.e ListBox:


If the active region is West, The check box beside West is Active, i.e contains an "X"

View 4 Replies View Related

Excel 2012 :: Checking To See What Values Are Missing From One List

Jul 15, 2014

If seen a couple of examples but for whatever reason it doesn't work on my sheet. (Excel 2010 32 bit) I don't understand how to highlight the entire column to see this particular value is not in this list. I have two lists, I want to see what data am I missing In list 2 that I have in list one. Basically all I am trying to do is see what values are not in the second list but are in the first list so I can later add them to the second list. (Also the 2nd list is longer than the first if that makes a difference.)

View 3 Replies View Related

VBA - Checking If Cell Is Named?

Nov 28, 2011

Programmatically speaking, any way of checking whether an arbitrary cell is part of a named range (that is, short of looping through an entire book's named ranges checking for intersections)? (It can be assumed that all the named ranges consist only of one cell).

View 6 Replies View Related

Checking Value Of A Cell Using Variable

Oct 3, 2013

I am trying to check the cells in column C for a defined set of rows and if it is blank change it to astericks.

Current is the row selected when the macro begins
LastRow is the last row with data (in column A)

For i = Current To LastRow
If Range("C" & i).Value = "" Then Range("C" & i).Value = "***"
Next i

View 6 Replies View Related

VBA - Checking For By How Much A Cell Is Indented

Oct 16, 2013

I am using VBA to indent the values in a range of cells.

However, I would like my code to check if the label has already been indented, to prevent it from being indented further.

View 5 Replies View Related

Checking Cell Value Is A Number

Aug 6, 2006

I want to run some macros based on the value of an input cell, but only if the input is a number (ie. it is not a letter or other character).

View 6 Replies View Related

Checking Date In Cell

Apr 11, 2007

Is there any way through VBA that I can check whether the date in cell A2 is Monday or not.

Also the code should allow me to continue if its Monday else should promt a message saying that its not Monday and whether the user still wants to continue. If no it should terminate if yes the next part of the code should continue.

View 9 Replies View Related

Checking If Cell Value Is True Or False

Mar 27, 2009

I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:

View 3 Replies View Related

Checking For Blank Cell When Reformatting

Sep 29, 2006

I want to reformat some data, arranged as follows, and ignore blank cells

Date1 Time1 blank Time2
Date2 blank Time3

Date1 Time2
Date1 Time2
Date2 Time3

Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out

Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub

View 3 Replies View Related

Error Checking Routine - Check Range Values On Various Worksheets And Report If Error

May 29, 2014

Error Check Marco.xlsm

see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:

[Code] ....

Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).

Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?

View 8 Replies View Related

Checking If A Value Is Present In A Cell If So Changing To The Cell Below

Feb 28, 2007

Problem Designing "new customer" form, a textbox(forename) in the
form has the Control source of "B3" (an empty space in my Customer
database). When the form is run and the forname is typed in the box, it
fair enough appears in the Database sheet (in B3).
However, then when opening the form again and typing over the forename
just inserted it will ofcourse overwrite it (B3 is replaced). Any ideas how i can input
code into the sub linked to the textbox so that it checks the control
source and moves down if the source is empty(code checks B3 for text, moves to B4) then the next one (B4 is checked, moved to B5).

Dim topCel As Range, bottomCel As Range, _
sourceRange As Range, targetRange As Range
Set topCel = Range("B2")
Set bottomCel = Range("B65536").End(xlUp)
If topCel.Row > bottomCel.Row Then End
Set sourceRange = Range(topCel, bottomCel)
Set targetRange = Range("B3")

View 9 Replies View Related

Error Checking With Range Cell In Userform

Jul 29, 2014

I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:

One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..

The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?

View 1 Replies View Related

Checking Two Sheets Cell Contents Against Each Other For Duplications

Mar 23, 2009

I have a master sheet that has 3500ish names on it, and another sheet that I'll need to drop in a list of about 1000 names. What I need on the master is a way to check the dropped in data, find duplicated names, and flag them up.

Now, I believe what I did last time was have a true/false method of telling me if they're on both sheets, then use an IF formula to instead make Trues into "yes" and Falses into "no". However, I can't for the life of me figure out how I had it previously checking both sheets and confirming/denying if they're on both sheets or only appear once.

View 2 Replies View Related

Checking Number Of Characters In Cell Macro?

Mar 6, 2009

i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.

View 10 Replies View Related

Checking Number Of Characters In A Cell Macro

Mar 6, 2009

i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.

View 8 Replies View Related

One Cell Checking For Duplicates In Range Of Cells?

Mar 21, 2014

Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.

View 5 Replies View Related

Show Tick Or Cross Upon Checking Cell

Jun 2, 2008

i don`t know how to make this in VBA

But please allow me to explain, if I have numbers in Cell F9 I want image to be displayed as (X <---- which it means wrong) on G9 and message to be appear in H9 says only words are allowed. In case, cell value are words; I want it to show image <---- which it means right) and the message to be say correct. And if cell is empty I want it to show image (!) and the cell beside it the message should say (Please Fill up).

I want to apply this to words instead of numbers as well.

View 4 Replies View Related

Return 1 Of 2 Cells After Checking Cell For Number

Aug 2, 2008

I have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).

All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).

The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.

View 8 Replies View Related

Macro To Paste Data After Checking Text In Cell

Aug 1, 2012

I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".

Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.

Any code that would check the information in B1 into this macro code below:

Sub Copy_Allinfo()

Dim Sht As Worksheet
Dim Rng As Range

For Each Sht In Sheets
If Sht.Name = "Sheet4" Then

[Code] ........

View 7 Replies View Related

Loop Checking And Moving Data If Cell Is Not Empty

Mar 12, 2007

in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.

here is the macro that moves the data.
Sub movedata()

Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Selection.Insert Shift:=xlDown
End Sub

View 9 Replies View Related

Checking If A Cell With In A Range Is Presen In Another Range

Oct 1, 2008

I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).

View 2 Replies View Related

Copyrights 2005-15, All rights reserved