Checking Two Sheets Cell Contents Against Each Other For Duplications
Mar 23, 2009
I have a master sheet that has 3500ish names on it, and another sheet that I'll need to drop in a list of about 1000 names. What I need on the master is a way to check the dropped in data, find duplicated names, and flag them up.
Now, I believe what I did last time was have a true/false method of telling me if they're on both sheets, then use an IF formula to instead make Trues into "yes" and Falses into "no". However, I can't for the life of me figure out how I had it previously checking both sheets and confirming/denying if they're on both sheets or only appear once.
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date Reference no. Name Employee ID 16-Feb-12 S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
I have a workbook with a sheet titled Variables. There are 6 additional sheets in the workbook and each sheets needs to be named with the cell contents of A2:A7 in the Variables sheet. I have attached the workbook and you can look at the names in the sheets tabs to see what I'm trying to do here.
The workbook is too large to attach but can be viewed here: http://www.shuffleupanddeal.org/name_sheets.xls or http://www.shuffleupanddeal.org/name_sheets.zip
I get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets. sheet1.jpg sheet2.PNG
1. Cells in column A, Sheet 2 are compared with the Cells in column A, Sheet 1.
2. Sheet 3 is produced containing all the rows in Sheet 2 for which there is no duplicate cell in Column A, Sheet 1.
3. The rows copied from Sheet 2 to Sheet 3 are highlighted on Sheet 2. Attached is a workbook with 3 sheets. Sheet 3 is the desired result (+ the cell highlighting on non-duplicates on Sheet 2).
I have a column, lets call it A, with a small list of airports. There will never be more than 7 airports in this list. There may be as few as one airport.
Now, I have column B which has ~100 airports listed.
All involved airports will be listed by their 4-letter code, i.e. PANC, PADG, PABE, and so on.
What I want to do is, if any airport in Col A is also in the list in Col B, to have that airport populate into a cell, like C1. Now, if two airports in A are also in B, then those airports should populate into C1 and C2, and so on for 3 or more airports.
I could probably do this by nesting 7 IF formulas to check each line one by one but, there's got to be a more elegant solution that can handle this?
If VBA is needed, that's fine too as this project already has macros in it.
Total IDs with Code 60 Total IDs with Code 345 Total IDs with Both Codes
[Code] .......
In column “A”, there are 14,000 ID Numbers. In column “B”, there is either a 60 or a 345 code beside the adjacent ID number in column “A”. There are duplicate IDs, some with same code and some that have both the 60 and 345 codes. I need to count ID numbers with code 60, code 345, and the IDs with both codes without duplication.
I have to type a an ID in column D of a worksheet called restricted funds, I have 13 sheets in that workbook and each sheet has in column D some IDs, I can not type a duplicate ID, in the that sheet. What is the best way to avoid no duplications. IDs are simply numbers.
On Worksheet Data 1 Column I there is a column of data with "some" duplicated text entries.
The data is sorted so that all of the duplications appear in a blocks, i.e.
This is the first This is the first This is the first This is the second This is the second This is the third This is the third This is the third This is the third This is the fourth This is the fifth
I want to - Starting in Worksheet Data1 cell I4 Copy A4 to Worksheet Data2 cell A4
Then go back to Worksheet Data1 cell I4 drop down to cell I5 and if the data is the same as the data just copied drop down a cell and keep going until it reaches a cell with different non duplicated data.
Then Copy that cell to Worksheet Data2 cell A5
So that I end up with a list of data with no duplications.
I would like to Compare Column A with Column B, if Column A contains text or numbers anywhere in Column B, then remove the corresponding rows not just in Column B, but Column C and D as well for that row.
I have two workbooks (source and target) I want to copy column A in the source workbook to column A in the target workbook and remove duplication in the target workbook. If any.
[Code] .....
Found this in another forum it works for the copy but not the removal of duplication.
Have tried a few things but can't get it to work properly. I have attached the file I am working with because it is much easier to understand if you just look at it!
Basically, I have a single sheet with three columns:
Name, Post Code, Tenant
There are varying instances of 'Name' and each one has a different 'Tenant'.
What I need to do is merge the contents of the Tenants cells so that for each different 'Name' there is only 1 instance and then for Tenants all the different cells are merged i.e. "Tenant 1, Tenant2, Tenant3...etc"
I hope this makes sense, as I mentioned above it will be a lot clearer if you have a quick look at the attached spreadsheet.
I have to review work papers with 50+ sheets. The users often hide the sheets they do not use. As part of my review I have to review all sheets, even the hidden ones.
What I would like to achieve:
To create a list of all hidden sheets with hyperlinks so I can go directly to the hidden sheet. This would be the same as a table of contents but for hidden sheets.
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
I've got a spreadsheet with a 'data' sheet and I want to add and name additional sheets based on the contents of a range in the 'data' sheet - it could be 1 extra sheet, it could be 100, the range is open ended.
I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.
What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
I've been given the task of automating a spreadsheet to assess whether work has been done by each employee. Every employee has their own spreadsheet, where column A is a job code, and column H contains either y or n dentoting whether they have completed the task (y) or not (n).
The main spreadsheet is designed to show any outstadning tasks across everybody so it has a list of everybodies names in column A and then any incomplete tasks will be listed from columns b onwards next to the appropriate person. Here is what I have done at the moment.
I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....
I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
Programmatically speaking, any way of checking whether an arbitrary cell is part of a named range (that is, short of looping through an entire book's named ranges checking for intersections)? (It can be assumed that all the named ranges consist only of one cell).
Is there any way through VBA that I can check whether the date in cell A2 is Monday or not.
Also the code should allow me to continue if its Monday else should promt a message saying that its not Monday and whether the user still wants to continue. If no it should terminate if yes the next part of the code should continue.
