Checking Table To Determine Value In VBA?
Jan 28, 2012I have 2 stocks (A10 & A11)
Using VBA I want to check the table above to determine which lending percent each will be given.
ADVERTISEMENT
Table Value Checking - Percentage
May 27, 2012I have a question about value checking. For this spread sheet, what I am trying to do is make a macro that does as follows:
For sheet 2 and 3, there is a column made up of values that all add to a percentage value of 100% at the bottom (cell C9). I wish to check that this percentage value is true by ensuring that there are no values in a table in sheet 1(cells N20 to T20).
Essentially, if there are any values under this certain table in sheet 1, then the percentage value on this second and third sheetcan not equal 100%. If it is 100% then I want to make a message pop up telling the user to make the count again while automatically clearing cell C6 on sheet 2 and sheet 3.
Checking If All Filters Are Selected In Pivot Table?
Aug 31, 2012I'd like to check whether all the filters in a pivot table is selected or not.
I am currently using the following code:-
Code:
Count = 0
For i = 1 To Worksheets("WW").PivotTables("PivotTable6").PivotFields("Country").PivotItems.Count
[Code]....
where flag is to flag whether all fields are selected in the pivot field or not.
The problem is the above code is very time consuming.
Determine If Cell Is In Pivot Table?
Mar 4, 2004In VBA code, what's the simplest way to verify whether a cell is a member of a pivot table or not? I have a complicated way of doing this by checking if creating a formula in another cell with a reference to the cell in question generates the GETPIVOTDATA function; however, it seems like there should be a much simpler way.
View 3 Replies View RelatedDetermine The Age Of A Value In Respect To A Table Of Columns
Jan 13, 2010I'm trying to determine the age of a value in respect to a table of columns and just cannot seem to nail it - perhaps it's my logic .
1 year2 year3 year4 year5 year5 year +Balance395.0384769.77271115.9771436.9441738.5292009.48775
I have a balance (in this case, 775), I need to determine where it sits within the table.
For example, if my balance is less than a year, retun "1 year less". If it's greater than the one year, but less than 2, return "1 year old"; if it's greater than 2 years but less than 3, return "2 years old". I need to do this all the way until it's greater than 5 years.
I guess it's an IF statement, but my calculations keep churnin out 2 years, when in fact, we can clearly see it's 3 years (because it's greater than the 2 year value).
Determine If Cell Value Exists In Column Of Table
Feb 18, 2008Im trying to write a formula that will check if a name that I have in column A also appears in column B and if it does I want it to return a value for example TRUE in column C.
I'm currently doing a survey and I have all employees in column A (600persons) and then column B I enter thos that have taken the survey. So If an employees name exist in column B he/she has done the survey and then they I get the value "TRUE" or "1" or something else. So in this way I can easily see who has and who hasn't done the survey. I've been trying with VLOOK and so on but I can not get it right? Maybe I need VBA?
Determine The Source Data That Was Used To Create The Pivot Table?
Sep 7, 2009Given a pivot table, is there any way that I can determine the source data that was used to create the pivot table?
I suspect that the pivot table was created using only part of the data, but I'm not sure.
Checking
May 25, 2009what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
View 9 Replies View RelatedOdd Or Even Checking
May 13, 2006Did Microsoft do this for a reason. But it seems to me there is no built in formula to check weather a number is odd or even.
=isodd(A1) or =iseven(a1) would be nice.
curent if I have to do something like, which works but is a lot of effort.
=IF(A1/2=INT(A1/2),"Even","Odd")
Checking For Duplicates
Oct 15, 2009On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Vba For Checking Dates
Sep 21, 2009Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
Checking If Row Contains Text?
Dec 29, 2013I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies View RelatedChecking A Row To See Who Got All A Grades
Aug 15, 2007I've got all the grades sorted out for the Principal, she is now looking for me to tally up all the students who got straight 'A' grades. I know there is going to be anotehr combination here but I'll start with the basics of straight 'A's
The screen below shows how the data is presented although I've slimmed down the headings to fit better.
How do I insert a formula to look at each row to see where based on the subjects taken, there are straight 'A's
************************************************************************>Microsoft Excel - Y13 & 14 Combined Worksheet.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ6=
ABCDEFGHIJKLMNOPQRSTUVWXYZ1ArtArt*2BiologyBSChemistryD&TDramaEconomicsE.*LitFrenchGeographyHistoryH.*EconICTICT2IrishLatinMathematicsMaths*PureMusicPhysicsPoliticsPsychologyR.ESociologySpanish2********A****A**********A*3********AA*A*******A******4******A*C*****D****B******5***********B**********BAA*6*******C***D************BBSheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Checking For Time
May 26, 2008I only want then to be able to make entries between 07:45 and 08:45.
If TimeValue(Now()) > "0:745:00" And TimeValue(Now()) < "08:45:00" Then
code if OK
Else
code if not OK
MsgBox "TIME HAS EXPIRED .....SORRY."
End If
For Each Not Checking Through Range
Jun 17, 2008All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
Checking That A Value Is A Multiple Of Another Value
Feb 9, 2007Is there a way to check a value, that is a multiple of another value.
E.G.
say the user specifies a height of 225 and then specify laminations of 45
is there a way to check the value of 225 to ensure 45 divids into it perfectly??
and if it doesnt then gives an error message of some kind.
So if someone specifies height of 200 and lamination of 45 an error would show because 45 cant be divided into 200 perfectly.
Checking For Values
Mar 2, 2007I am just having trouble getting vba to recognize cell values. All I want it to do is if cell g2 = 5, then end sub, Else, continue. But I am so clueless that I cant even get it to recognize that what is in cell g2 is the number 5. I would think that I could just put,
If range(g & 2) = 5 Then
End Sub
Else
Resume
End If
Checking Formula's With F2
May 1, 2007I regularly check formula's in quotations to ensure they are working on the correct cells by cycling through each cell and pressing F2. Pressing F2 on a cell with a formula (in office 2003) draws boxes around each cell that is being referenced in the cell. This is very handy, but for large worksheets is time consuming to "F2" each cell. . . . can the F2 behaviour of highlighting cells be automated ? See attached screenshot.
View 5 Replies View RelatedChecking If Date Is Entered Ok
Jul 8, 2014I have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots):
=IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).
Checking On 2 AND Functions If One Or Other Is Satisfied
Mar 24, 2014I am trying to compare 2 conditions to see if one or other is correct and if so out put ok if correct and wrong if incorrect i tried this formula but does not work.
IF(OR(AND(j3="UP",t3=1),(AND(j3="DOWN",t3=-1),"ok","wrong")
Checking In Which Range A Value Is Located?
May 18, 2014I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
Checking Cell Values
Oct 9, 2008I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example
Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440
I need to check that the first digits (no mater how many) are all the same except the last digit.
Checking For Conditional Formatting
Mar 30, 2009I have a sheeet conditionally formatted so that if data is missing from certain cells, that cell turns 'red'. Is it possible to have cell A1 (for instance) report if there is a red cell anywhere on the sheet?
View 4 Replies View RelatedChecking Two Dates On Userform?
Apr 4, 2014I've got two text boxes where users input the dates in specified format (dd/mm/yyyy). current validation checks whether one date is not earlier than the other one and it looks like this:
[Code] .....
However if they are equal which suits me I am still getting an error. don't need a calendar btw
Checking All Checkboxes On Worksheet?
Aug 12, 2014Have created a small form with 5 checkboxes and a button on a worksheet. Want to check all checkboxes on the worksheet when the button is pressed.
However, I am getting "Run-time error '438': Object doesn't support this property or method". Enclosing the code for your reference.
[Code] .....
Checking A Range For Data
Nov 10, 2008I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
Checking Info Entered
Aug 5, 2009I want add some code into a macro of mine which checks to see if J8 >20 and DA8 = "TRUE" then a msgbox appears saying "no auto margins".
View 2 Replies View RelatedChecking For Missing Lines
Nov 20, 2009I have a file of users and security codes. each user should have at least one security code. How can I get rid of all the good combinations and only leave the bad ones?
Example:
user: joe blo
security code = 1
user: jim white
security code = 1
user: sam song
security code=5
user: jo jo
user: billy boy
security code=1
You can see Jo Jo does not have a security row. I need to the good ones to be removed so only the user with the missing security code is left:
Checking For Numbers In String
Dec 3, 2009I have data like follwing strings.
WAY-308312-1
WAY-521340-1
233-6767-676-6
First two strings are correct. If I get number like in third string first part of string then we have to move row to some other sheet.
The first part of string should have text like WAY-123-13-1.
I used Val function it checking first charector only. It the string is like 2A1A-243-233-2 the it is not checking.
NEXT Without FOR When Checking Multiple Ranges
Jan 27, 2010I am getting a NEXT without FOR error message when i try to run this code. This is the portion of sub im having trouble with.. been trying to work it out but to no avail. I thought that i might have to do Next Ccell, though I got the same error.
View 2 Replies View Related