On Worksheet Data 1 Column I there is a column of data with "some" duplicated text entries.
The data is sorted so that all of the duplications appear in a blocks, i.e.
This is the first
This is the first
This is the first
This is the second
This is the second
This is the third
This is the third
This is the third
This is the third
This is the fourth
This is the fifth
I want to -
Starting in Worksheet Data1 cell I4
Copy A4 to Worksheet Data2 cell A4
Then go back to Worksheet Data1 cell I4 drop down to cell I5 and if the data is the same as the data just copied drop down a cell and keep going until it reaches a cell with different non duplicated data.
Then Copy that cell to Worksheet Data2 cell A5
So that I end up with a list of data with no duplications.
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date Reference no. Name Employee ID 16-Feb-12 S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
Total IDs with Code 60 Total IDs with Code 345 Total IDs with Both Codes
[Code] .......
In column “A”, there are 14,000 ID Numbers. In column “B”, there is either a 60 or a 345 code beside the adjacent ID number in column “A”. There are duplicate IDs, some with same code and some that have both the 60 and 345 codes. I need to count ID numbers with code 60, code 345, and the IDs with both codes without duplication.
I have to type a an ID in column D of a worksheet called restricted funds, I have 13 sheets in that workbook and each sheet has in column D some IDs, I can not type a duplicate ID, in the that sheet. What is the best way to avoid no duplications. IDs are simply numbers.
I would like to Compare Column A with Column B, if Column A contains text or numbers anywhere in Column B, then remove the corresponding rows not just in Column B, but Column C and D as well for that row.
I have a master sheet that has 3500ish names on it, and another sheet that I'll need to drop in a list of about 1000 names. What I need on the master is a way to check the dropped in data, find duplicated names, and flag them up.
Now, I believe what I did last time was have a true/false method of telling me if they're on both sheets, then use an IF formula to instead make Trues into "yes" and Falses into "no". However, I can't for the life of me figure out how I had it previously checking both sheets and confirming/denying if they're on both sheets or only appear once.
I have two workbooks (source and target) I want to copy column A in the source workbook to column A in the target workbook and remove duplication in the target workbook. If any.
[Code] .....
Found this in another forum it works for the copy but not the removal of duplication.
I have a list of names in column A, don't know how many different names but for sure some of them repeats in different cells of column A.
A1 = NAME_1 A2 = Alan A3 = Ben A4 = John A5 = Alan A6 = Kevin A7 = Mark A8 = Dominic A9 = John A10= Tom A11=Alan A12=Frank
How can I make aonther list in column B, which contains a list of name in column A without repeating. So that B1 = NAME_2, B2:B4 is exactly like A2:A4, then B5 = Kevin, B6 = Mark, B7 = Dominic, B8 = Tom, B9 = Frank.... and so on. Another question, which is very similar to the previous one. In the same column A, now I add an AutoFilter (Data > Filter > AutoFilter) in A1. A drop down arrow button will appear at the right side within A1. Click the down arrow and another box shows: Sort Ascending, Sort Descending, All, Top 10, Custom, Alan, Ben.... the rest of the data in Column A but each unique data will only shows once in that list. How can I copy the contents of that box?
I need to form a list of text (column A) and corresponding numeric values (column B) whereby the list values are placed in the next unused cell in these columns when the worksheet is updated. Placing values in the list is based on finding a TRUE value in column E.
The logic for this goes as follows:
If the value in cells E44:E1445 is true then copy the corresponding text value from the range C44:C1445 into the next unused cell in column A starting at cell A44.
and
if value in cells E44:E1445 is true then copy the corresponding numeric value from the range E44:E1445 into the next unused cell in column B starting at cell B44.
I recorded the following Macro to copy Data to a Database Sheet, but cannot get it to find the next empty row. When I run the macro it will paste to whatever row the cursor is in. I would like to have the data copied to the next empty row starting with column "A2". Also (this may need another thread) I would like a formula in Column A to automatically record a new number with each new entry, starting with say 0001.
Any way to copy cells from a list of employees. I have already shortened the list significantly, which is based on the location... from over 700 employees down to a possible 30 rows. Now, I want to be able to copy the exact number of employees to an employees list in my form.
Say the list is from A7 to A36, but one time the location may only have 4 employees and the next time there may be 7 employees or whatever. I tried copying the entire list and pasting the list as values, but it pastes the empty cells as duplicates - conditional formatting is on to show if a name was manually entered twice in the list.
I have a cell showing the number of employees in the location, but I'm not sure of the code to dynamically copy from cell A7:A# based on the employee count. So, I'm always going to start in A7, but the end may change. I thought about using End(xlUp), but it stops at the last formula and I tried searching the internet for the right words, but I have had no luck.
I am looking to do is make a copy of a hidden sheet named "Date" and rename the sheet tab based on a list of dates that I have on another hidden worksheet named "Date Names" I like the code to enter as many sheets as needed. The dates are in order from A1 to A53 on the "Date Names "sheet .
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
I'd like to do is to use loops to copy each value in "Sheet1" into every other row in column B of "Sheet2" starting on row 16. I realize that this is a simple task, but I'd like to know how to do this for the purposes of learning the correct VBA coding.
Macro that would copy a row if the value is found in separate list. For example, in column B of sheet "223" I have values. In another sheet "DATA" I have a list of values, which if these values match the value in column B of sheet "223" it would copy the entire row from "223" to another tab "output".
Is it possible to insert a formula that skips blanks while copying a list? For example: If I have a list and make a column next to the list to put an "x" in if I want to see that info in another list, is there a way to pull the info over with a formula and skip blanks to create a clean list?Color
I have a list that I choose a certain percent of each color:
Then I would like these to be put below in order starting at Cell A68, by using a formula or if I need to use VBA, that is fine.
Actually I would like to CONCATENATE from the list above. To combine B25 and E25. It has to keep the % sign though. So maybe a copy and paste values using VBA code would be best.
Here is what I could like:
10% CF2 MED GREY 20% CF8 TAN etc.etc.
In my sample I have only 4 colors and percentages selected. There maybe as many as 10 colors picked. So A68 on down is fine to have them listed.
The following URL has a great solution to this problem, I was unsuccessful in implementing it. Excel VBA: Create Worksheets for Each Item in an Excel Table of Data
Need A macro to copy a pre-set sheet, we can call it a "template sheet", for each name in a pre-set range, a list. This list will have empty cells and names from F9 to F190. For each name i need it to copy the template sheet and place the sheet name within the new sheet. Should a user delete a sheet, activating the macro again should re-create the missing sheet and not just crash (was told there could be an issue).
I am trying to create a copy of the sheet "template" using a list of department numbers from the sheet "list". The following code works sometime but other times it stops without copying a sheet for all the names in the list.
Sub CreateNewSheets() Dim NewSht As Worksheet, Crow As Integer, NewName As String Dim c As Range, wks As Worksheet, TempName As String, BaseName As String
Application. ScreenUpdating = False
Set wks = Sheets("List") 'list of department numbers to be copied for a sheet.
we have two workbooks which do change daily. one with 'data' sheet containing 40,000+ rows of data in coloumn 'B' another with 'cust' sheet with 10,000+ rows of data in coloumn 'C' as a part of daily work we have to compare last part of the each cell in Cust sheet with data sheet
1. last 6 digits are compared and the results copied to 'cust' sheet from 'D' column and so on adjacent to the corresponding data. 2. last 5 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (1) 3. last 4 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (2) 4. any duplicate within the row to be deleted from left to right
as the data are enormous the work can be completed only 10 - 15 % manually.
Sheet1 has the list of names (cells A2:A315). Sheet2 is hidden and has related formulas. Sheet7 is the sheet i want to copy
What i want to do: 1) I want to copy sheet7 for each name on the list 2) Rename each sheet with the next name on the list 3) In each of the copied sheets in cell B1=newsheetname
I want to make macro that copies values in a1 to a100 to cell c10 everytime I click enter.(first enter a1 to c10,second enter a2 to c10 and so on to the end of the list).
I am trying to copy/extract row of data from worksheet(Detail)A:W to worksheet(1st Letter) if X=1st Letter on worksheet(Detail). I have never used VBA and i am not sure if this can be done with a formula.
I have columns on Sheet 1 with a filters and I want a way to make a list on Sheet 2 of each item (with out repeating) that is in the corresponding column on sheet 1.
This will be programmed in a userform to create the list when the form is loaded.
The end result being this: CopyFilterList.png
This is an example and there could be up to 50 or more options.
Basically, I have a list of data in columns B,C,D, and an ascending number in column A. Three cells in G10,H10 and I10 can now be copied over to B,C,D no matter long the list (see post underneath) however I need it to simultaneous add an ascending number to column A once the macro is run.
Attached workbook shows two example situations in sheet 1 and 2, and a completed form in sheet 3(based on sheet 2 example).
