Collecting Data From Another Sheet.
Aug 27, 2009
It is a small program for learning new words of a foreign language.
By means of a userform one can add new words to the program which will be stored on a sheet called "data" each new data entry will get a subsequent number.
On the main-sheet "werkblad" one can by giving 2 numbers from between which to collect the data retrieve the words they want to learn.
For example. If on the mainsheet in cell B3 the number 3 will be entered and in cell C3 the number 12, only those words will be shown with a number between 3 and 12.
However sometimes I would like these words to show up in randomized order. So I made a new collumn on the "data" sheet with the following formula =rand() and sorted it, but unfortunately the formulas on the "werkblad"-sheet don't present the given numbers [3 till 12] in randomized order.
The formula I use for collecting the data from the "data"-sheet is the following:
View 8 Replies
ADVERTISEMENT
Jun 22, 2007
What I am looking to do is pull all the data of clients with assets under $2million into another tab. How can I do this without copying and pasting? I am looking for either a macro or some kind of formula that will search the entire data dump and pull in just the clients I need without leaving any rows blank.
View 9 Replies
View Related
Dec 17, 2009
I've just been asked to do a new Quality Control project for my boss. What I'm looking to do is be able to input the thickness values of our product in one worksheet, and have it recorded in another, as well as have the data separated by the model number
The main problem I'm having is figuring out how to enter data in the 1 worksheet as a template, and have the data consecutively stored, one after the other
Are there any functions that will allow me to do this?
View 6 Replies
View Related
Mar 16, 2014
As per attached sheet, I have the date distributed in two three cell and want to transfer data to single cell. I don't know which formula has to use to collect it together.
need solution.xlsx‎
View 2 Replies
View Related
Dec 15, 2009
I have several sheets which give me results, e.g. "dummy1", "dummy3" and "dummy5" out of a list of all possible dummies 1 to 10. It is possible that there are any number of "dummy5" (or any other dummy) outcomes.
I just want Excel to make a list of all the possible outcomes.
In this case, I want Excel to make a List that says:
"dummy1"
"dummy3"
"dummy5"
This means Excel shall search the respective Columns and just check, is this dummy there or is it not.
View 12 Replies
View Related
May 11, 2011
I need a code to select sheets with pages less than 15 to print out. Also, a code to print out just the first 5 and last 5 pages if its more than 15 pages.
I've tried this so far but no success:
For X = 1 To Worksheets.Count
If Y Is Nothing Then
Set Y = Sheets(X)
Else
If ExecuteExcel4Macro("Get.Document(50)") < 10 Then
Set Y = Union(Y, Sheets(X))
End If
End If
Next X
Y.Select
View 6 Replies
View Related
Jan 10, 2008
i have wordlists which i would like to enhance through texts. For that purpose i need a macro which reads a text and splitts it into words and put the words into three columns. Lets assume the column where the words are supposed to be put is columns A,C and E. The column A should contain single words containing no spaces from Text, column C should contain compound words which have one space between them and in column E those compounds which have two spaces. Now i will put my existing wordlist in column G before i start splitting texts. The macro should put only those words from text into column A,C and E which dont already exist in columns A,B,C,D,E,F and G. In Column B i will place the corrected or checked words from column A. In column D i will type the corrections and checked versions of those compunds existing in column C. And the column F will contain the compound words which are corrected and checked from Column E.
Column A--> single words splitted from text through macro (containing no spaces)
Column B--> corrected and checked versions of words from column A through user
Column C--> compound words containing one space splitted from text through macro (for example:"etwas möchten" or "do something")
Column D-->corrected version of C through user
Column E-->compound words containing two space splitted from text through macro (for example:"sich uerberzeugen lassen" or "down in dumps")
Column F-->corrected E
Column G--> existing dictionary wordlist through user
Signes like ".", ":",";", "/" or quotation signe itself should be seen as seperator. And the words or compounds splitted from the text should not contain these signs.
The text will be put in another sheet in the same excel file. Lets call that sheet "text". The macro should search for words through whole sheet ignoring empty cells or columns.
None of the columns should be filtered or ordered. The columns shound not be deleted as well. That way the user wont have to correct the same word each time cus the corrected as well as the original words will be there.
A thread with similar purpose was made sent by AdamDay as well, where rylo has posted a good solution already.
View 14 Replies
View Related
Dec 20, 2012
I gather two lists of serial numbers (i.e.) from two different sources; one populated in sheet1, A:A (with variable row numbers) and the other in sheet2 B:B (again with varying number of rows)
I am trying to gather a master list of unique serial numbers in sheet3, C:C.
So far I have tried advanced filter, union.range, etc. but couldn't figure work it. I guess some of these columns need to have names assigned to it and have a header.
View 9 Replies
View Related
Dec 10, 2013
I would like to create a menu representing "tasks" where an amount of "time" can be designated per option for my employees to select and fill. I would like this information to then be tallied elsewhere so I can keep track of our efficiency.
So far, I've created a table where a "time" input is nested beside each "task" drop down menu, I would like these inputs to be added up underneath the same category on the budget tab.
For example: If I work Monday, Tuesday and Wednesday doing tiling.. I would like the budget to reflect those accumulated hours (throughout the week) nested under "tiling".
Here's the file, what I'm trying to accomplish [URL] ............
View 1 Replies
View Related
Jan 1, 2014
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))
I can't get it to work correctly across two sheets.
I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx
View 6 Replies
View Related
Aug 8, 2014
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
View 5 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Jul 22, 2014
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
Example file :
Attachment 334122
Alternative link [URL]
View 1 Replies
View Related
Apr 11, 2007
The data from the Data sheet is copied over to the Report sheet with formula.
Basically, what I need to do is If statement:
-when there is no any data in csv file (so the Data sheet will be empty);
-the range (A7:N1000) to be hidden (on the Report Sheet)
-the Report sheet to be saved
and also...
I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.
Option Explicit
Sub Update_Report()
'
' Macro1
Dim extract1 As String
Dim dReport As String
Dim rSheet As String
Dim dSheet As String
extract1 = "LeadSheetAll_0001.csv"
dReport = "Appointments.xls"
rSheet = "Report"
dSheet = "Data1"
Application.ScreenUpdating = False
Application.DisplayAlerts = False
View 9 Replies
View Related
Jun 15, 2014
I have a data sheet (Sheet 1) which consists 1000 lines of data (1000 rows and column til DP all different). This is the data of all theprojects that my team undertakes on a monthly basis. Sometimes the data might change on in column AG to AL. I want to put the details of the changes to be done in Sheet 2. The unique value here is the project ID.
What i want is: I will create a table in sheet 2 and update the details that will need changes and it should directly change in sheet 1.
View 5 Replies
View Related
Mar 30, 2014
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
View 2 Replies
View Related
May 14, 2014
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
View 5 Replies
View Related
Jul 22, 2014
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it place all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
Example file : ExampleExcel.xls
Alternative link : [URL] .....
View 5 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Feb 6, 2008
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Jan 7, 2009
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
View 4 Replies
View Related
Dec 27, 2012
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies
View Related
Feb 9, 2014
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies
View Related
Apr 17, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
View 5 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Feb 20, 2014
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
View 14 Replies
View Related
Jun 1, 2009
I've got a bit of a quandary here that my novice programming skills can't seem to solve.
Here is the scenario. I work for a photographic library. We have a spreadsheet that contains 5 or so columns, and a couple of thousand rows. Essentially each row contains an imagine code (the number we use to file away the imagine, ie. US_NY_NYC_1 ) in the first cell, and the image information in the following cells (ie metadata, keywords, photographer, date, etc).
so a typical row would look as follows:
Filename | Keywords | Photographer | Metadata | Location |
all the keyword, photographer, metadata, and location information can only be tied to the one image code whose cell begins the row.
Now, here is my dilemma. This sheet (lets call it the master sheet) contains all the images we have in a given batch. However, when a client orders images, we will send them most images in that batch, but not all, and we may send a few additional. So I have a separate sheet that contains only those image codes that the client requested. What I need to do is essentially take a code from the second sheet, find that same code in the master sheet, and copy over all the cells associated with that code's row. If the number does not exist in the master sheet, simply leave that row with only the code in the first cell, and the rest blank, and move on.
so for example, in my second sheet lets say I have the following A_B_C . I would like for excel to find that same code in the master sheet, and then copy over the metadata, photographer, date, etc, associated with that code, and paste it into the second sheet, so that that row in the second sheet now looks identical to the row with the same image code in the master sheet . If A_B_C does not exist in the master spreadsheet, then I would like excel to simply leave that code in its own row, leave the rest of the row blank, and move on to the next code.
View 12 Replies
View Related
Feb 28, 2009
i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...
View 9 Replies
View Related
Jun 26, 2006
i'm trying to get data added in one sheet of a workbook to automatically be entered into another sheet. such as a monthly, Quarterly and Annual balance sheet.
View 3 Replies
View Related
