As per attached sheet, I have the date distributed in two three cell and want to transfer data to single cell. I don't know which formula has to use to collect it together.
need solution.xlsx‎
What I am looking to do is pull all the data of clients with assets under $2million into another tab. How can I do this without copying and pasting? I am looking for either a macro or some kind of formula that will search the entire data dump and pull in just the clients I need without leaving any rows blank.
View 9 Replies View RelatedIt is a small program for learning new words of a foreign language.
By means of a userform one can add new words to the program which will be stored on a sheet called "data" each new data entry will get a subsequent number.
On the main-sheet "werkblad" one can by giving 2 numbers from between which to collect the data retrieve the words they want to learn.
For example. If on the mainsheet in cell B3 the number 3 will be entered and in cell C3 the number 12, only those words will be shown with a number between 3 and 12.
However sometimes I would like these words to show up in randomized order. So I made a new collumn on the "data" sheet with the following formula =rand() and sorted it, but unfortunately the formulas on the "werkblad"-sheet don't present the given numbers [3 till 12] in randomized order.
The formula I use for collecting the data from the "data"-sheet is the following:
I've just been asked to do a new Quality Control project for my boss. What I'm looking to do is be able to input the thickness values of our product in one worksheet, and have it recorded in another, as well as have the data separated by the model number
The main problem I'm having is figuring out how to enter data in the 1 worksheet as a template, and have the data consecutively stored, one after the other
Are there any functions that will allow me to do this?
What I got going on is a program I use for reporting is shooting out information.. while most of the information it sends to an excel workbook is sectioned by cell, there is a good chunk of information that's dumped into 1 cell. Is there a macro, or something, I can do to separate the information in this single cell, into separate cells? Auto Merged Post Until 24 Hrs Passes;Here is an example of the report. You'll notice a bunch of information in the 'Description' section. What I want to be able to do is run a macro that will seperate the 'Item Number', 'URL', 'Serial Number', 'Model Number', and 'Details' information into seperate cells.
View 2 Replies View RelatedI have several sheets which give me results, e.g. "dummy1", "dummy3" and "dummy5" out of a list of all possible dummies 1 to 10. It is possible that there are any number of "dummy5" (or any other dummy) outcomes.
I just want Excel to make a list of all the possible outcomes.
In this case, I want Excel to make a List that says:
"dummy1"
"dummy3"
"dummy5"
This means Excel shall search the respective Columns and just check, is this dummy there or is it not.
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I have the problem to sort data in the single cell, i have search in this forum but no solution found for example my data like this:
CELL A1: R1, R7, R103, R50, R5
CELL A2: C8, C22, C2, C5
CELL A3: DB9, DB12, DB6, DB60, DB4
i want the macro to sort content in cell become:
CELL A1: R1, R5, R7, R50, R103
CELL A2: C2, C5, C8, C22
CELL A3: DB4, DB6, DB9, DB12, DB60
I would like to know if you can split 1 single cell into multiple cells in 1 column?
View 11 Replies View RelatedIs there a way to split a single cell in to two cells?
View 9 Replies View RelatedI have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
I've managed to write a macro to take data input into a column-oriented form and transpose it into the next available rows in 3 data sheets. In the blank workbook, you will find a functional data entry form with a "submit" button that transposes data from the first column of the form to the next available row in sheet "Data_R", data from the second column of the of the form to the next available row in sheet "Data_I", and the sum of both columns to the next available row in sheet "Data_C", clearing the form for further use.
Now, I need adding to the macro code that will sum data from the constituent columns of each multi-column category header (Marketing, Intake, etc.) in sheet "Data C", entering the sums under their respective single column headings in the next available row of sheet "Data_S".
I need to do this in order to use Defined Names (utilizing the OFFSET function) to create charts comparing the different categories that automatically update as new data is input via the form. I know how to do this, I just need the multi-column categories summed into single columns to make it work.
I have values on master sheet and want to link those values to source documents in the same workbook. But the values on master sheets are made up of more than one value on another sheet.
For example on master sheet I have $137,000 that is made up of values in P7 + Q7 + P57 + Q57 on source sheet. If user wants to see where this number is coming from; the user will click the number to go to source document.
On a single valve I linked to the source sheet to a single cell. One thing I was thinking, using conditional format, so if one of the cells is selected in source document the other cells that combine the total of the master sheet cells should be highlighted, just my 2 cents.
I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup
For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...
i need to copy the values from more than one cell and need to paste all the values in the single cell (if possible values seperated by commas).
View 2 Replies View RelatedI would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedI have 4 cells with simple data in them. In another cell, I would like to make a phrase and include all the data from the 4 cells in that phrase.
Example:
="Jackpot: &G2 (&G1) / &G3 = &G4 each"
I already tried this:
="Jackpot: "&G2" ("&G1") / "&G3" = "&G4" each"
Am I missing something? I'm pretty sure this is doable, I just don't know what's missing.
see sample file, i need a formula to do like B column,
I WANT MAKE LIKE B COLUMN, COMPARE A COLUMN DATA IN C,D COLUMN AND ALL DATA SHOULD BE IN B COLUMN..
I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
I have 5 columns of data where each column of data has two number in it separate by a space where the headers for each column is c1, c2, c3, c4 and c5. for example
c1 c2 c3 c4 c5 c6 c7 etc
1 1 1 2 2 2 2 1 1 1
3 3 3 4 4 4 4 3 3 3
etc
where each of these number pairs is under a separate column. The preview option for this forum editor is showing quite a difference between intended presentation and actual..
What I am looking to do is for each line item is to put the content of each row into a single cell with vertical alignment of the pairs of numbers. for example
c6
1 1
1 2
2 2
2 1
1 1
3 3
3 4
4 4
4 3
3 3
where each group of five pairs is in a single cell.
I am looking to do this in as automated an approach as possible. I dont want to have to ctrl-enter for example 4 times for each cell in c6 for 1000 different line items..
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
I need a code to select sheets with pages less than 15 to print out. Also, a code to print out just the first 5 and last 5 pages if its more than 15 pages.
I've tried this so far but no success:
For X = 1 To Worksheets.Count
If Y Is Nothing Then
Set Y = Sheets(X)
Else
If ExecuteExcel4Macro("Get.Document(50)") < 10 Then
Set Y = Union(Y, Sheets(X))
End If
End If
Next X
Y.Select
I tried to import web data from a textarea (look at example2.jpg) into excel and it always end up squeezing all the information into one single cell(spreadsheet.jpg).
I am trying to find a way to edit the imported data which is similiar to paste special or extract the information from the cell into a table, but I seem to waste a lot of time on this and going no where.
Basicaly what I am trying to accomplish is the use of a single cell to enter the values 1 thru 60, so starting at e2 for instance, if I enter the number 1 then cell f2 will populate with a 1, if I were to enter the number 18 then the cell w2 would populate with an 18. So the range of cells that need to populate in this example would be (f2:BM2) for row 2. Furthermore if I were to enter a -1 or a -18 in cell e2 then those numbers would be eliminated from the appropriate cells on row 2. The next 299 rows would need to perform the same way for a total of 300 user input rows.
The way that I'm imagining e2 would behave in the example would be...type a 1 then enter....18 then enter....31 then enter and so on. Columns f thru bm would locked and unselectable....so a tab should send me back to a3.
Reasoning.... this is a simple scoring system based on 60 codes and data integrity is very important and I want to eliminate as much human error as possible. I will be setting autofilters and such later on.
I am attaching a screencapture as well.
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
i have wordlists which i would like to enhance through texts. For that purpose i need a macro which reads a text and splitts it into words and put the words into three columns. Lets assume the column where the words are supposed to be put is columns A,C and E. The column A should contain single words containing no spaces from Text, column C should contain compound words which have one space between them and in column E those compounds which have two spaces. Now i will put my existing wordlist in column G before i start splitting texts. The macro should put only those words from text into column A,C and E which dont already exist in columns A,B,C,D,E,F and G. In Column B i will place the corrected or checked words from column A. In column D i will type the corrections and checked versions of those compunds existing in column C. And the column F will contain the compound words which are corrected and checked from Column E.
Column A--> single words splitted from text through macro (containing no spaces)
Column B--> corrected and checked versions of words from column A through user
Column C--> compound words containing one space splitted from text through macro (for example:"etwas möchten" or "do something")
Column D-->corrected version of C through user
Column E-->compound words containing two space splitted from text through macro (for example:"sich uerberzeugen lassen" or "down in dumps")
Column F-->corrected E
Column G--> existing dictionary wordlist through user
Signes like ".", ":",";", "/" or quotation signe itself should be seen as seperator. And the words or compounds splitted from the text should not contain these signs.
The text will be put in another sheet in the same excel file. Lets call that sheet "text". The macro should search for words through whole sheet ignoring empty cells or columns.
None of the columns should be filtered or ordered. The columns shound not be deleted as well. That way the user wont have to correct the same word each time cus the corrected as well as the original words will be there.
A thread with similar purpose was made sent by AdamDay as well, where rylo has posted a good solution already.