I am trying to count the number of cells that have a red fill, this is the formula
that I am using and it is not working.
=COUNTCOLOR(A1:A10,255,FALSE)
I want the cell to show 2 if 2 cells are filled with red, does this make sense.
Ok so I am trying to streamline the Shirt ordering process at my work. I have made a table with Employee names as Column A, then Row 1 is shirt sizes from small to XXXL. The Cell values are going to be the colors people want. I want to total the number of each size/color combination. But someone may want more than one of the same color. For instance you would enter "BK, BK" if you wanted 2 black shirts of that size. This is where the issue with COUNTIF comes in. If a cell has the same value twice, it only counts it as one because counts the cells with an instance of a value, not the actual count of instances. Is there a way to make COUNTIF or a better function for this?
View 6 Replies View RelatedI am trying to count the number of extra people scheduled for each hour of the day, from 2 dropdowns in A3:B7
The formula in (1) D11:D26 works, but when the shift passes over the midnight it will not count accurately.
The formula in (2) E11:E26 also works well, but only counts the number of times a particular hour is mentioned, but not the number of extras in C3:C7.
The results in (3) F11: F26 are what I need, which is based on looking at the times from the dropdowns and using the number of extras in C3:C7.
I have an attendance sheet for our Company Employees.
This attendance sheet shows the salary of the month from the total basic salary / hour and overtime / hour of each
employee.
I found a problem in this sheet. When i reduced overtime charges in the last of this sheet so the Total Salary of the month
was not changing. I couldn't found any mistake in formulas.
I have a downtime tracking spreadsheet that we want to be able to track the downtime on the line. However, we only want to count the working hours, not overnight, etc. I have added the weekend day work hours and Saturday work hours but haven't been able to figure out how to connect them into a formula with the down time.
View 1 Replies View RelatedHere's a link : [URL] .....
What I would like to do is create a column that will count the number of cells in each row whose background color is not red or yellow. The yellow background color was input manually, and the red background color was input through conditional formatting.
I have a spreadsheet full of GPS locations of different pumps on different dates. Each column represents a different pump, and each row represents a different date. The cells on this sheet contain one of two things - either a set GPS coordinates or the word "Repair" and a description of the repairs done. A few days ago I went through and checked the GPS coordinates to see which pumps were where every day during the past three years, and changed the background color of each cell containing GPS coordinates determined to be off-site to yellow. I then used conditional formatting to change the background color of each cell containing the word "Repair" to red. Now I need to go through and find out how many pumps were on location, not being repaired on each day.
Here's a link to a sample workbook. Any cell containing the word "GPS" just represents the fact that there are GPS coordinates in the cell. Their format is basically "(#####, #####)".
pump location example spreadsheet.xlsx
Is there any way to count a list that has been highlighted by conditional formatting?
View 9 Replies View RelatedI am trying to a macro that allows me to change the backgroud color and font color depending of the value of the cell.
For example is cell A1 is having the value between 1 to 3 the background color of the cell will the light turqoise, if the value is between 4 to 20 the cell background color will be green and so on.
I have based on certain posted example and adapt to my code but somehow it is not working.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Value
Case Is = 1, 2, 3
Target.Interior.ColorIndex = 34
Case Is = 4, 5, 10, 20
Target.Interior.ColorIndex = 43
Case Is = 30, 40, 50
Excel 2003 user.
I have a work sheet with numerous cells coded one of two ways. Either a color of red or a color of green. Is there anyway to count how many times green cells show up? etc..?
I know I'd need to know the exact color but it would save a lot of time as I need to find out how many cells are of each color.
Is there away to count cells with 1 or more different fill colors in a column?
View 9 Replies View RelatedThis very simple color code below worked before but now it gives "Application-defined or object-defined error". When I try it on a new workbook, it works fine.
Code:
Sub sdsdfsd()
Selection.Interior.Color = 65535
End Sub
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedI am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View Relatedhow I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View RelatedIn my Excel 2003 worksheet, I need the row color to automatically change to blue (color 5) (bgcolor = #0000FF) - when the user changes the text from VALID to INVALID in the range: B3:B65000.
For example:
Cell B5 contains the text: VALID
When the user changes the text in the field to read: INVALID - then I need the row range: A5:W5 to change to the color blue.
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedFor some reason the fill color and font color no longer work! If I set the font color as red, it continues to show up as black!
This is the strangest thing! I have no conditional formatting set and this just started a week ago.
I have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View Related1. By entering a numerical value in Cell A1 for example typing 5.
2. Then, next five columns would be blocked with specific color.
3. if i am typing 10, then 10 columns would be blocked with specific color.
I have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
if it actually possible to colour data points depending on the colour of the cell of the data it refers to? if not is it possible to colour it any other way
i have uneven amounts of data for weach month but still want the months to be displayed, this is the best way i can think of of doing this