I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
screen_print.JPG
[Code] .....
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedEach week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View RelatedI looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
I have a spreadsheet as below:
Sheet1 *BCDEFG3QAUSERQAUSERQAQA4SRF RegistrationWorkflow-UserWorkflow-QAWorkflow-User FeedbackORMC 1ORMC 25CompletedCompletedCompletedCompletedCompletedPending Excel tables to the web >> Excel Jeanie HTML 4
I need to create a formula that would read from cell B5 to G5 and the first "Pending" it finds, it should populate the corresponding value from B3 to G3.
In this case, since from B5 to G5, the first "Pending" is in cell G5, the formula should return as "QA".
I have a list of teams, and beside them I need a calculation to be filled.
The criteria is based on a cell reference (a month which can be changed from a drop-down in BM2) and also the name of the team.
dummy 16.xls
I need to populate data based on criteria.
The criteria has been attached as follows.
Sample Test.xlsx
I have the following in sheet 1:
Sheet1 *BCDEFGHIJKL1NameLast DoneMarket Cap (M)PEPrice/NAVHigh, 52 WksLow, 52 WksRevenue GrowthCurrent RatioDebt to EquityROA2AMMB $ * * * 5.76 $ * * * *17,361.71 12.8861.633 $ * * * * * *7.05 $ * * * * * 5.30 10%1.20.42%3CIMB $ * * * 7.27 $ * * * *54,036.27 14.8372.156 $ * * * * * *9.01 $ * * * * * 6.56 3%20.61%4RHBCAP $ * * * 7.31 $ * * * *16,022.91 11.0761.435 $ * * * * *10.40 $ * * * * * 6.53 6%3.20.83%5HLFG $ * * 11.70 $ * * * *12,120.91 7.2581.576 $ * * * * *13.74 $ * * * * * 8.44 4%1.711%
I have the following in sheet 2:
Sheet2 *BCDEFGHIJKL2Parameters**********3Last Done**********4Market Cap (M)**********5PE**********6Price/NAV**********7High, 52 Wks**********8Low, 52 Wks**********9Revenue Growth**********10Current Ratio**********11Debt to Equity**********12ROA**********13***********14StockLast DoneMarket Cap (M)PEPrice/NAVHigh, 52 WksLow, 52 WksRevenue GrowthCurrent RatioDebt to EquityROA15***********
1)I need to create a formula to populate all stocks that satisfies the parameters that I will input in cell C3 to C12 in sheet 2 based on the data in sheet 1.
2)The stocks should then be populated in cell B15 downwards in sheet 2. If there are 20 stocks that satisfies the parameters in cell C3 to C12 in sheet 2, then all 20 stocks should be populated in cell B15 downwards in sheet 2.
3) The respective details of the stocks should also be populated in cell B15 to L15 for all stocks that satisfy the parameters entered in cell C3 to c12 in sheet 2.
I have a master list of people. (call it master) I have 1 other worksheet that should contain everyone aged 15 and up (call it must progress). One of the columns on the master show's their ages. I was hoping excel would automatically populate the sheet based on the age from the master list. So, for example. On the Master list, Joe Smith is 17. I would like Each cell in the Joe Smith Row to automatically copy itself to the must progress worksheet because his age is over 15. The formula would be based off the age on the master.
View 2 Replies View RelatedI want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
I think the best thing is to take a look at the attached, then read what I'm looking for, as it would make more sense...
That being said: what I am looking to do is change cell L3 based on new criteria in cell M3.
Right now if B3=Stationery World then L3=Stationery.
What I then want to happen is if E3=Toner then M3=67200 which then has L3=Equipment Consumables and NOT stationery.
I've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I am after a VBA code that I can use to populate a fax template based on criteria's
Basically I have records which are being logged throughout the day via a User form and sometimes there may/maynot be a charge. the user decides at the time. The column is named "to be charged" and is filled with either Yes/ No.
I need to be able to select the date to print or Just the same day date and print all faxes' that have "Yes" for charge This way all the information for each fax is populated and the user can just print.
and if possible mark a Colum non the master sheet as printed with a X or something
Is it possible for the tab name to auto populate from a specific cells contents?
View 9 Replies View RelatedLet me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I need to auto populate an excel spreadsheet however it has 3 criteria to match. Pressure, size and name. I need to somehow lookup the name and if it matches the pressure rating and size then return the quantity in that cell. There is 2000 cells and I am sure there is a logic function or someway to complete this task faster then manual entry.
View 4 Replies View RelatedI am trying to populate a cell based on which number meets the criteria I define. This is based on sales revenue, so if the revenue is less than $6.5M, I want to use a certain value. If the value is equal to $6.5M but less than $8M I want to use another value and finally if the revenue is greater than $8M i want to use another value. Here's my formula, but it returns $0.
=IF(B2<6500000,Bonuses!J45)*OR((B2>6500000)*AND(B2<8000000),Bonuses!F45)*OR(B2>=8000000,Bonuses!B45)
I need to determine the MAX date in a column based on specific criteria. Column A6:A500 = Task Names, Column N6:N500 = Dates (there are some blanks).
What I need is to determine the latest date in column N6:N500 based on which task I choose from column A6:A500.
I am getting an error i have list (sheet4) i want to lookup the data from different table (Name range) based on the location in column A i am using the small function copy down, in cell C6 i want the range ROWS($A$2:B6) go back to ROWS($A$2:B2) since the criteria in column A has changed from China (A5) to US (A6)
Sheet4ABC1Locationproductsamount2ChinaA2954.63ChinaB1565.284ChinaC3772.055ChinaD2027.76US#REF!#REF!
Array FormulasCellFormulaB2 =INDEX(INDIRECT(A2),SMALL(ROW(INDIRECT("2:10"))-ROW($A$2)+2,ROWS($A$2:A2)),1)C2 =INDEX(INDIRECT(A2),SMALL(ROW(INDIRECT("2:10"))-ROW($A$2)+2,ROWS($A$2:B2)),2)B3
[Code].....
I'm trying to create a formula that tells me the following:
If the item is marked as closed (vs. active), then how many renewals/terminations replacements/etc are there? These are two difference columns in a worksheet.
If I have the following table:
Name ProductSize QuantityPrice per unit
AX35510
AX451015
AX551210
BX601010
AX35510
I now want a resulting table that will combine all rows where name, produc, size and price are identical and have one row with the same data apart from the quantity that will have been added - so for the table above the resulting table will be:
Name ProductSize QuantityPrice per unit
AX351010
AX451015
AX551210
BX601010
I have a report which is split into page sized chunks, in column P I have an identifier Planned, Booked or Running.
Is it possible to build a macro which says something along these lines
If P1 = "RUNNING" Then
Print that Page
Else
Go to P44
If P44 = "Running" Then
Print that page
Else
Go to P87
and so on until the cell selected is blank then stop.
I have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
automate a data table I set up in excel. I need the formula to look through a bunch of raw data I have, and add quantities in each row, but only from the rows that have the same machine numbers. I attached the document of raw data I've collected, and on a separate tab, an organized table. I would like this table to automatically be updated with the appropriate data, as I enter it as raw data.
View 3 Replies View Relatedhow can i sum base on the Criteria in Columns G, in this sample the sum should be 67.
Sheet1ABCDEFG1V. GoodGoodFairBadN/AReported29853N/A8Bad31085328N/A410953N/A8Good510853N/A8Good61085378Good77853N/A8V. Good810853N/A8Good910753N/A8Reported108853N/A8Good11585308N/A1210653N/A8Good1367Excel 2010Worksheet FormulasCellFormulaG13=67
I have a huge list of survey responses which asks people to identify their location and then rate how important 6 facilities in their area is (rating 1 - 4, 4 being most important). So the table has cells are similar to this, except that there are about 5000 responses with about 2500 different locations identified
Location
Location
Location
[Code].....
I have been able to analyse the average results for the whole dataset by using the following formulas:
=COUNTIF(A2:C4,"camden") Count number of occurrences a location is listed
=ROUND(AVERAGE(D2:D4),2) Average response for medical centres
=COUNTIF(D2:D4,1) Counts number of times '1' comes up, would repeat '2', '3', and '4' to create a pie graph
But what I would really like to do it be able to count each response for each question by location (for example "Camden"). I've tried both of these but they don't seem to be working.
=IF(A2:C4,"camden"),COUNTIF(D2:D4),1
=COUNTIF(D2:D4),1,IF(A2:C4,"camden")
The file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................