I'm trying to make a macro which compares the content of two cells and delete the row if there are more then one of.
For example:
Column A Column B
test 1 10
test 1 10
test 1 20
test 2 30
test 2 30
The result must be:
Column A Column B
test 1 10
test 1 20
test 2 30
Is here a code for to resolve this?
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
Trying to compare a list of names in 2 columns. Column A has a short list of names I'm looking for in the long list of Column B.
How can you create the macro that does...
If any value in Column A matches any value in Column B
Then format (bold, highlight, etc...)
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro.
Shape color changes as the hyperlinks are selected from sheet1.....
So I have a sheet with 600 or so rows of data on a sheet called "Agent_Summary". On another sheet in the same workbook I have a list 20 peoples names. I am trying to find a way to look at the 600 or so lines on the Agent_Summary in column A and see if the name in that cell matches any of the 20 names from the "Team" Sheet. If the name on Agent_Summary is not found on the "Team" sheet then it clears the contents of that cell and moves on. Then it comes back and Deletes the blank rows. I can make it look for any 1 of the 20 names and the code works fine. How do I turn it into something that will look for any of the 20 names?
Here is my code to look for 1 of the 20 names that works great.
Code:
Sub Clean_up_Agent_Summary()
Dim Cell As Range
Dim R As Long
Dim RE As Object
Dim Rng As Range
Set Rng = Worksheets("Agent_Summary").Range("A5:A600")
Set RE = CreateObject("VBScript.RegExp")
[Code]...
"Worksheets("Team").Range("A5")" is where my 1 name is and the rest are just below that. I am thinking some kind of an Array but I am stuck on getting that set up and working right.
i've put this previously on here with no results. There is a formula already in there though does not work because what I want to achieve is to have Column A & Column C to Match Column E & Column F, to Return the Value YES or NO. I’ve Highlighted in ROW 947 one that should Say NO yet Says YES.
View 3 Replies View RelatedI have a spreadsheet that lists something like this (an easy version of it anyway!)
On tab 1 of my spreadsheet I have a table with lots of data similar to:
Column A Column B
111 12.23
111 14.32
222 48.23
222 28.34
222 10.23
222 33.40
333 23.21
On tab 2 of my spreadsheet I have unique versions of the data Column A on tab 1, for instance:
Column A
111
222
333
I would like to have a formula on tab 2 that can compare column A on tab 2 with column A on tab 1 - if it is similar I want it to total the amounts for all of the values equal.
So for instance, on tab 2 the final data should be this in my example:
Column A Column B
111 26.55
222 120.20
333 23.21
I've seen formulas that are similar.. but the condition is it can only total the rows that match. And preferably can do this from the other sheet.
If i have Two Column A and B
A has the Figures 1,2,3,4,1,1
B has the Figures 1,1,1,1,1,1
how can i compare column B with A
and Show Me that there are 1,1,1 is still not match
If i has this table name delivery
Table name is delivery and goes from a to p and 1 to 621.
Basically I am looking for Excel VBA code to compare 4 cell values from 1 sheet to 4 columns on another sheet, but the 4 values on other sheet must be in same rows. I am but a VBA beginner and I have been trying for days with no luck. I want it to go something like this:
IF A5 (on sheet1) = 40 AND B5 < (A value in column M on sheet2) AND C5 < (a value in column E on sheet 2 but in the same row as the previous) AND D5 < (a value in column F on sheet 2, also in same row as previous 2) THEN display model from column C on sheet 2 also from same column into sheet 1 G5
for example (see attachment) on sheet1 if you enter 40 into A5, 3846 into B5, 1492 into C5 and 1999 into D5 Then "MODEL19" (from sheet2) should show up in G5. I had put in a 'button' but it is not needed if there is a better/easier way to do this.
I have DAta in Col A (Med ID ) and B has number of events assocaited with the unique ID. The Unique ID is also in Col C from another data source. I wnat to return the value from Col B in in Col C that mathces the MD ID if available. There are several more col in the sheet that have other dta that is not assocaited with this. HAving an Excel formula or VB code will do some analysis. Example
Exported Med ID Data Source 1Exported Med ID Data Source 1 Number of Times Not Availle able Med ID- Matched Result From Col B to Med Id in C
how to compare maximum similar characters within same colowmn,
Part numberEXTRA 30 BIANCOEXTRA 30 BIANCO SPREXTRA 30 GRIGIOEXTRA 30 GRIGIO SPRFMSTYLE ALPIFMSTYLE ASIAFMSTYLE ASIA SPRFMSTYLE BEIGEFMSTYLE BIANCOFMSTYLE CARAMELFMSTYLE GIALLOFMSTYLE GR.PERLAFMSTYLE GR.PERLA SPR
I can nothing about conditional formating but i need a conditional formular that check if 2 column(or more) in an row have the value grater then 0 will be marked, lets say red.
Code:
A B C D
row2 0 0 0 8
row3 2 2 0 0
row4 0 2 3 3
row5 0 0 2 0
row 3 column a,b will be mark red and row 4 column b,c,d will ba mark red.
I have column A of 700 usernames and column b with 85, I want to compare b with a and if appears in the list place a 1 in column C
View 1 Replies View RelatedI've created a macro that will compare 2 columns and move the rows around (whilst maintaining the original order) to line matches up and leave spaces for mismatches. In the file attached if you run the macro "RouteCompare" on the "Selection1" tab it works fine as there is only a small number of rows.
When i try it on "Selection2" tab with over 2K rows it bombs out. IT seems to only work for columns that are only slightly mismatched or not that long.
I'm not an expert on it, but i thought it might be excel using up all the resorces it has and grinding to a halt.
Is there any way to edit the macro to allow reset whatever is slowing it wodn after a period of time, or changing the macro to prevent it from crashing on long flows?
Here is the code I'm using:
Sub CompareMyRoute()
'Macro to compare flows
'Created by by Brendan M Murphy
Application.ScreenUpdating = False
[Code ...........
I have two cells which contain text, and I'd like to use IF function to compare between them. Something like: =(IF(A1=B1),"TRUE",FALSE"). But it seems like the function cannot do it with text..
View 3 Replies View RelatedI would like to compare 2 cells, Sheet1!B2 and Sheet1!B3
(
If sheet1!b2 is between the values of "D101" AND "D105", OR EQUAL TO "D201", OR EQUAL TO "D203", OR EQUAL TO "E110", OR EQUAL TO "E111", OR between the values of "H107" AND "H110" OR between the values of "H107" AND "H110" OR between the values of "H203" AND H205
)
AND
(
if sheet!b3 is EQUAL TO "E" )
then output a 1, if not, output a zero
The formula, which I deleted, excel reports back as being too long
I want to compare the value of D8 to the value of the last cell in Column D with data. I have the following code but am stuck! (This is code that I was writing from scratch and may not actually work)
Code:
Dim myRng As Range
Dim C As Range
Dim lr As Long
On Error Resume Next
[Code] .........
I am stuck on the "Else" statement...If they don't match then change the color of cell D8 if they do match I want to do nothing.
I want to do is create a function that will allow me to compare various cells. For instance, we have people scoring applications and I want to see if raters' ratings are within 10 points of each other. If raters differ by 10 points I want to print conf call on my spreadsheet (so I can schedule a conference call for raters to discuss the 10 point difference). If raters are within 10 points then I want to print "compute mean" (so I will generate a mean for each applicant).
I can get Excell to compare one rater against another (=IF(C3-C4>10,"conf call","calculate mean"), but I do not know how to make it compare all raters. For example, I have four raters and I want to be able to compare rater 1 to rater 2 and rater 1 to rater 3 and rater 1 to rater 4 and then rater 2 to rater 3 and rater 2 to rater 4; and lastly rater 3 to rater 4. Then if any rater dyad is different by 10 points I want to print our "conf call", but if there are no differences (by 10 points) then I want to print our "compute mean".
I converted a very large PDF to Excel. I want to run a logical formula that will compare a mailing address and property address. My formula goes like this: =if(a1=b1,"yes","no"). However, when I run my formula I am getting False for every line even though I can plainly see the answer should be yes. My guess is that it has something to do with the formatting of the text inside the cells that I'm comparing but they seem to be formatted the same. The strange thing is that if I manually type the information and run the formula, it comes out fine. I have more than 37,000 lines of text so I cannot manually retype the whole thing.
View 4 Replies View RelatedI am trying to code for the following conditions and will like to know how I can embed these conditions into one statement.
IF(AND(X>365, A>B), C*D
IF(AND(X>365, A<B), E*F
If neither of the conditions apply, then 0.
I want to compare the sales from Jan'12 - Oct'12 VS Jan'13 - Oct'13 by showing them in stacked Columns. So will have 2 stacked columns one for year 2012 and beside it for year 2013 and each one will show the months.
View 3 Replies View RelatedI have one column which contains suppose first names & i have other two column which contains first name & last name in same sheet but like they may be having in g & h column.
so i want to exact last name of user form that column(g & h) to my first name column(a).
I need to look colB and colC should be equal to colH and colI, IF both cells matched, then copy the EmpNo(ColB or colH) and Counter(colC or colI) get the difference of values in another colomn
If there is any row for Employee or Counter issing from either of tables populate with RED in either of 2 colomns,
for example:at row 17, table 1 has a missing colC, and row 17(table1) = row18(table2), it should populate the row17 for table2, as a reference.
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies View RelatedI have column A that is 1,500 records.
I have column B with 40,000 records.
Among the 40,000 records in column B, duplicates of ALL 1,500 records from column A exist.
My question is: How do I find WHERE the 1,500 dupes are and how can I delete JUST those records?
I have a spreadsheet which will have several rows of data.
What I need is for some code to locate the duplicate values in the left most active column and then look over the rows that they are populating and delete and cells that are not present in each of the rows pertaining to the duplicate value in 1st Column and if possible remove all the blanks.
I have a sample, I will attach it and explain alittle better there.
Utilizing Excel 2009, I am trying to look for a solution that will allow me to compare a column which contains a list of filenames i.e. "832423.wav" to a directory which contains those files to see "832423.wav" is present in that directory such as "C:UsersBDocumentsAudio Files". If there is a match then the row is highlighted. Is that possible?
View 5 Replies View Related