have been trying to write a VB macro to compare two spreadsheets. Here is what I need help achieving....
Compare Sheet1 and Sheet2. Data exists in rows that have a unique identifier in one column.
If unique ID (with row of data) exists in Sheet1 and NOT Sheet2, add row from Sheet1 to Sheet3 and mark "REMOVE" in new column next to row.
If unique ID (with row of data) exists in Sheet2 and NOT in Sheet1, add row from Sheet2 to Sheet 3 and mark "ADD" in new column next to row.
If unique ID (with row of data) exists in both Sheet1 and Sheet2, take row from Sheet2 and place in Sheet3 and mark "UPDATE" in new column next to row.
Worksheet 1 has 200 rows, Worksheet 2 has 500 rows. Common denomentor in column A. Please advise how I can get 200 rows from w/s 1 pulling the relevant data from both worksheets into a new worksheet
I currently have 2 worksheets worth of data in the same workbook. Each data set has its own date and time stamp in columns A and B respectively with varying data then following in the row. I would like to write a macro that would look in worksheet 2 and find the matching date and time stamped row in worksheet 3. Then select the data from both worksheet 2 and worksheet 3 and paste them in the same row in worksheet 1.
I have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
I would like to make a macro which compares the content of the same cells in two worksheets which are in the same workbook.
More clearer I have a workbook with two sheets (Sheet1 and Sheet2). What I would like the macro to do is to check cell A1 in Sheet1 and compare it to cell A1 in Sheet2 and so on till the last cell (IV65536). If there is a differnce between the two cells, then it should highlight the background of the cell in Sheet1.
I know that there has been similar requests on this forum (I searched and read them) but thew were different.
I would like to compare the data between 2 worksheets ("Sheet1") and ("Test") so that the contents of any cells in "Sheet1" that are different to the corresponding cells in "Test" are highlighted with a yellow background.
I have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries. Fine.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
I have 2 worksheets - one is a monthly update, the other is last month's data.
I want to highlight the changes on the monthly update sheet using conditional formatting.
I named the columns as ranges on the "last month" worksheet, and then used =Match(A1,Jan,0) (wheras Jan is the range on the "last month" worksheet where A1 resides)
What formula do you use to say "if A1 does NOT match a value in range "jan", then format it"?
I have a user that needs to compare MSExcel files with a mass number of worksheets within the file/files. Is there anything to compare Excel files and to print out the compared results?
I have a task that I thought would be quite simple but I can’t find a solution in any of the books I have or on this forum.
I receive a list of companies each day who owe money, in Worksheet1. The next day I receive an updated list in Worksheet2. Those companies who have now paid have been deleted from the list. I want to compare the two lists and highlight those companies in Worksheet1 who are no longer in Worksheet 2.
I’ve tried to do this by getting the values in the list in Worksheet2 to loop through the list in Worksheet1 but can’t make it happen.
I’d be really grateful if someone was able to help me with the code I need.
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
I am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I can´t get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.
I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):
Sub find_cell() Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate ar = ActiveCell.Row ac = ActiveCell.Column ' the two lines above store the row and column values of the cell found ' in your example ar is going to be equal to 229 and ac is 3 ' now this following lines are to change the colors to red With Cells(ar, ac).Interior .ColorIndex = 3 .Pattern = xlSolid End With End Sub
I don´t quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.
The "On" worksheet represents ALL of the students that LIVE on campus (freshman, sop****re, juniors, seniors)
The "JS" worksheet represents all the juniors and seniors going to school here
I need to know which of the JS live OFF campus.
So.....I need a macro that will compare the JS worksheet to the On worksheet and create a new worksheet called Off and populate it with those JS that are not in the On worksheet.
The "On" worksheet contains:
A B Last First
The "JS" worksheet contains:
A B C D E F G Last First Street Street2 City State NY
The new "Off" worksheet should contain the same columns as "JS"
Essentially what I want to automate is a check through one list on the Sheets("Notes") in column A, with another column B on Sheets(template). If there is a match I want to insert a part of the row that the match occurred on Sheet("Notes"), and insert it above the row where the match occurred on Sheets(template).
Here is my code so far, currently I keep getting a "Application-defined or object defined error" on the line
VB: Sheets("Notes").Range(Cells(i, 2), Cells(i, 11)).Copy VB: Sub add_notes(template As String) Dim Rng As Range Dim i As Integer
I'm trying to compare 2 worksheets with the same headers(NAME, ADDRESS, CONTACT NO...). What codes should I use that when there is a duplicated row in worksheet A and worksheet B, it will be deleted and when there are 2 names with different addresses and/or contact no, the whole row in file A will be obtained. Output should also be in another worksheet. It goes like this.
worksheet A NAME ADDRESS CONTACT NO JOE ABC 123 MIL XYZ 567 NIK LMN 234 NED QRS 456
[Code]...
So the output should be:
worksheet C NAME ADDRESS CONTACT NO JOE ABC 123 MIL XYZ 567 NIK LMN 234 NED QRS 456 JIM JKL 345 SAM FGH 789
Need a excel macro which can compare 2 xls files and highlight cells which are different in the 2 files its like a slightly advanced one >a prompt which asks file 1 after selecting file a prompt whichasks for file 2 ..then on running it should highlight cells in file two which are different from file one Both file have same layout ie if file one has n columns in n worksheets file 2 will also have same . So the comparison should be done for each worksheet in both file and cells should be highlighted ..
I am looking for a macro to look in Sheet 1 column A and compare the values to Sheet 2 column O. When it finds a duplicate I want it to delete the entire row in sheet 1. I dont want to have to manually sort anything if that's possible.
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
I get data pulls of logged in time, and shift start times.
Example in column C the person's actual login time is there, and column D has their start time. If there's a variance of 'x' how could I have column E display the variance? In this example 15 minutes?
Basically, if there's a difference between the 2, I need a formula that tells me what difference is.
I have one .xls file that contains an inventory list of all the products that I want.
Unfortunately this .xls file does not contain the prices for these items. I have another .xls file that contains SKU numbers and the prices related to those SKU numbers.
Is there a way to run every single SKU in the first file against the second file and, when a match is found, take the entry in the price column of the second file and place it in the first file so that my first .xls file contains all my products with prices?
I need to compare the value's on 2 cells. I have a sheet setup for my sales I would like to compare each day of the week. So in other words I would like to compare this Monday with last Monday and know what the percentage of my sales ether up or down is.
Example: Last Monday = sales $100.00 This Monday = Sales $200.00
100%
So If sales are up I would like the percentage amount font to be in green. But if sales are down I would like the percentage amount to be in red.
I have two spreadsheets I would like to compare against each other, last weeks inventory (Sheet 1) and this weeks (Sheet 2). All items are listed by unit number, is there a way to have all unit numbers on Sheet 1 colored red that are not on Sheet 2 and vice versa?
Is there a way to compare two cells and return true if they are the same, false if different? There is text and numerical data. As a side note, can anybody recommend a lightweight reference so I can sit for an evening or two and at least get an idea of what excel can do?
I have two Excel lists. One master list (list A) contains all our email addresses from our customers. The other list (list B) contains a list of people who do NOT want to recieve emails. How do I take the emails from list B (there are 1,200 of them) and compare them automatically to list A? Basically if any email address from list B appears in list A, I want it to delete in list A.
i have two worksheets. group and search. in group sheet it contain are groups of club & nation. in sheet2 when click the button find it will prompt player name. for example,when i put torres it will tell us that he belong to Liverpool club & Spain.