I would like to compare the data between 2 worksheets ("Sheet1") and ("Test") so that the contents of any cells in "Sheet1" that are different to the corresponding cells in "Test" are highlighted with a yellow background.
View 5 RepliesI currently have 2 worksheets worth of data in the same workbook. Each data set has its own date and time stamp in columns A and B respectively with varying data then following in the row. I would like to write a macro that would look in worksheet 2 and find the matching date and time stamped row in worksheet 3. Then select the data from both worksheet 2 and worksheet 3 and paste them in the same row in worksheet 1.
View 9 Replies View RelatedI have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
I have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries. Fine.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
have been trying to write a VB macro to compare two spreadsheets. Here is what I need help achieving....
Compare Sheet1 and Sheet2. Data exists in rows that have a unique identifier in one column.
If unique ID (with row of data) exists in Sheet1 and NOT Sheet2, add row from Sheet1 to Sheet3 and mark "REMOVE" in new column next to row.
If unique ID (with row of data) exists in Sheet2 and NOT in Sheet1, add row from Sheet2 to Sheet 3 and mark "ADD" in new column next to row.
If unique ID (with row of data) exists in both Sheet1 and Sheet2, take row from Sheet2 and place in Sheet3 and mark "UPDATE" in new column next to row.
Worksheet 1 has 200 rows, Worksheet 2 has 500 rows. Common denomentor in column A. Please advise how I can get 200 rows from w/s 1 pulling the relevant data from both worksheets into a new worksheet
View 9 Replies View RelatedI would like to make a macro which compares the content of the same cells in two worksheets which are in the same workbook.
More clearer I have a workbook with two sheets (Sheet1 and Sheet2). What I would like the macro to do is to check cell A1 in Sheet1 and compare it to cell A1 in Sheet2 and so on till the last cell (IV65536). If there is a differnce between the two cells, then it should highlight the background of the cell in Sheet1.
I know that there has been similar requests on this forum (I searched and read them) but thew were different.
I have 2 worksheets - one is a monthly update, the other is last month's data.
I want to highlight the changes on the monthly update sheet using conditional formatting.
I named the columns as ranges on the "last month" worksheet, and then used =Match(A1,Jan,0) (wheras Jan is the range on the "last month" worksheet where A1 resides)
What formula do you use to say "if A1 does NOT match a value in range "jan", then format it"?
I have a user that needs to compare MSExcel files with a mass number of worksheets within the file/files. Is there anything to compare Excel files and to print out the compared results?
View 3 Replies View RelatedI have a task that I thought would be quite simple but I can’t find a solution in any of the books I have or on this forum.
I receive a list of companies each day who owe money, in Worksheet1. The next day I receive an updated list in Worksheet2. Those companies who have now paid have been deleted from the list. I want to compare the two lists and highlight those companies in Worksheet1 who are no longer in Worksheet 2.
I’ve tried to do this by getting the values in the list in Worksheet2 to loop through the list in Worksheet1 but can’t make it happen.
I’d be really grateful if someone was able to help me with the code I need.
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
View 4 Replies View RelatedI am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I can´t get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.
I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):
Sub find_cell()
Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate
ar = ActiveCell.Row
ac = ActiveCell.Column
' the two lines above store the row and column values of the cell found
' in your example ar is going to be equal to 229 and ac is 3
' now this following lines are to change the colors to red
With Cells(ar, ac).Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End Sub
I don´t quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.
I have a file with 2 worksheets:
The "On" worksheet represents ALL of the students that LIVE on campus (freshman, sop****re, juniors, seniors)
The "JS" worksheet represents all the juniors and seniors going to school here
I need to know which of the JS live OFF campus.
So.....I need a macro that will compare the JS worksheet to the On worksheet and create a new worksheet called Off and populate it with those JS that are not in the On worksheet.
The "On" worksheet contains:
A B
Last First
The "JS" worksheet contains:
A B C D E F G
Last First Street Street2 City State NY
The new "Off" worksheet should contain the same columns as "JS"
Essentially what I want to automate is a check through one list on the Sheets("Notes") in column A, with another column B on Sheets(template). If there is a match I want to insert a part of the row that the match occurred on Sheet("Notes"), and insert it above the row where the match occurred on Sheets(template).
Here is my code so far, currently I keep getting a "Application-defined or object defined error" on the line
VB:
Sheets("Notes").Range(Cells(i, 2), Cells(i, 11)).Copy
VB:
Sub add_notes(template As String)
Dim Rng As Range
Dim i As Integer
[Code].....
I'm trying to compare 2 worksheets with the same headers(NAME, ADDRESS, CONTACT NO...). What codes should I use that when there is a duplicated row in worksheet A and worksheet B, it will be deleted and when there are 2 names with different addresses and/or contact no, the whole row in file A will be obtained. Output should also be in another worksheet. It goes like this.
worksheet A
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
[Code]...
So the output should be:
worksheet C
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
JIM JKL 345
SAM FGH 789
Is this possible in vba?
Need a excel macro which can compare 2 xls files and highlight cells which are different in the 2 files its like a slightly advanced one >a prompt which asks file 1 after selecting file a prompt whichasks for file 2 ..then on running it should highlight cells in file two which are different from file one Both file have same layout ie if file one has n columns in n worksheets file 2 will also have same . So the comparison should be done for each worksheet in both file and cells should be highlighted ..
View 1 Replies View RelatedI am looking for a macro to look in Sheet 1 column A and compare the values to Sheet 2 column O. When it finds a duplicate I want it to delete the entire row in sheet 1. I dont want to have to manually sort anything if that's possible.
View 3 Replies View RelatedI have a parent spreadsheet with raw data(with errors) and a child spreadsheet without errors. I want to merge the child into parent. (:{). I am thinking of comparing multiple columns from each sheet to ensure maximum accuracy. And when those columns match up we paste the corrected column data from child sheet to parent one. I am using windows 7 and Excel 2010.
View 1 Replies View RelatedSo I have this problem in excel with comparing 2 columns.
Basically, I have 2 columns(a &B) that I need to compare with one another and find out the matching data. I am trying to use that matching data to enter in our reports.
Both columns might have duplicate items because I am dealing with premium numbers.
Formula to compare these 2 columns and find the matching data and extract it to a separate column. Keep in mind, i am dealing with almost 20,000 lines of data.
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies View RelatedI would like compare data using a certain column to key off of and compare whether data has changed.
I have 5,000 rows and 26 columns. Cell C1 is CALLED PMNUM, cell I1 is called CHANGEDATE
I want to find all of the same PMNUMs (C2-C5000), look at the last change date (I2) (sorted in descending order), compare it to the previous change date (I2) and if anything has been changed in columns D2 through G2 and J2 through Z2 compared to the last time the data was reported, list the changes in in AA2.
I have need to do a comparison of 2 values located in different columns. As this is almost impossible to describe in text format, I have included a spreadsheet showing exactly the problem. Im sure the solution will involve INDEX and MATCH but every permutation I have tried has failed (possibly theres another way?).
View 1 Replies View RelatedNot sure if this should be in VBA or Formulas however what im trying to achieve:
I have a data report that i pull today, tomorrow i want to run the same report and see if there are any differences on the report. e.g show data that was not on the previous report.
Id imagine id have a sheet with yesterdays data, sheet with todays data, sheet with Differences that only shows the new lines between the report. Then after i have done i would just create a macro clear the difference sheet so its blank, copy todays data over to yesterdays data and repeat the process daily.
I am trying to compare a list of product codes on sheet 1 column A, with a larger list of product codes on sheet 2 column B.
My aim: when i click to button on sheet one the part numbers that are in both lists (sheet 1 and 2) Should be moved into sheet 3 columns B and be rearranged so that they match horzontally with the full sheet two pricelist which will have now moved to column A sheet 3. This should leave gaps in column B where there was no matching part number.
I have two lists of serial numbers which I want to compare to find those number which are not in both lists. I have used the following formula: =IF(A2=$G$2:$G$283,"",A2) where A2 equals the first cell in list 1, G2:G283 the range of the second list, true value "" false value display the contents of the original cell.
This works so far; where the contents in the A and G cells are the same on the row eg A2 and G2, but where they are different the contents of the A cell are being returned even if they are elsewhere in the range.
I want to compare two spreadsheets with the same data. One spreadsheet is for a certain type of beneficiary and the other spreadsheet is another type. We will call them Spreadsheet A and Spreadsheet B. They both contain Zip Codes and a count of zip codes. (Some of the zip codes is not a 5 digit code, but some letters or letters and numbers.) I want to compare the two spreadsheets and see if the same zip code appears in both spreadsheets and if they do, show them in a separate tab and total the two counts from the two spreadsheets.
Column A - Zip Code
Column B - Count
Right now i have a list of data in text format....they are stock tickers. One column is about 2000 entries long and the other is 500 entries long. I need to compare the two columns together and highlight the entries in the long column when they match to an entry in the 500 column. I have tried so many different formulas and conditional formatting on my own and can't figure it out
View 9 Replies View RelatedI am wondering if it is better to do this in excel or access. I am pretty familiar with access...i know this would be easy to do if querying from one table and doing a relationship between identifier, but i'm not sure how to capture data from both tables. But basically this is what I want. I have 2 files, which have identifiers and share amounts...both files will have some like identifiers, some not alike...basically this is what I want to do: ....
View 9 Replies View RelatedI'm trying to compare two sets of data on the same sheet. Each set has 4 columns...A - D and F - I. I would like to take the data from D and I (range 20 to 50) and compare them to see if any differences exist in the two columns. If there is something different I would like to bold and highlight the cells (A-D) in that row, and the same goes for the second set of data (F-I).
I'm trying to do this with macros so I can add it into my existing code.
I have two worksheets.
1 worksheet I have a value and I need next to it the result i take from other worksheet.
LETTERS
AMOUNT
A
Result
C
Result
G
Result
[Code]...
The list goes on.
So Pretty much I need to compare the value "LETTERS" on the first worksheet with the array of letters from second worksheet and insert in the field of the Result, the value next to the correct find in the array of letters ...