Comparing Cells With Reference Source And Skip Blanks

Jun 25, 2014

I need to compare cell value with information from main source cell.

And I need it to skip blank, return "-" if "-" was entered.

I attached example file for your reference.

View 14 Replies


ADVERTISEMENT

How To Skip Cells That Appears As Blanks

Apr 30, 2014

The spreadsheet that i use includes a table that some of the cells are displayed as blanks( include an IFERROR function ) I need to calculate the XIRR for a range of cells in a row that includes some of these "Blank" cells

View 2 Replies View Related

Skip Blanks Or Zeroo Cells

Jun 19, 2006

how can i skip blanks or zero cells

I have a column with data like this: ....

View 9 Replies View Related

Change Empty Cells To Blank Cells (need To Use Skip Blanks Function)

Mar 8, 2014

I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.

Do you got a fast method to make all the empty cells blank?

View 4 Replies View Related

A Formula To Reference Another Page And Skip Cells To Get To Desired Results?

May 14, 2014

I am trying to find a formula that will allow me to reference another page in my spread sheet. In my scenario the row I am referencing has 5 consectutive numbers after the reference point I would use for a vlookup. These numbers are all zeros except for one number in each row which will be a positive number greater than zero. I want my formula to check the first cell in the row, if it is not a zero it will show that number, but if this cell contains 0, then it moves over to the next cell. If all the cells in the row have a zero, then i just want zero to appear on my summary sheet. I tried to do a vlookup with an IF function, but I couldn't get it to work. I have attached a sample of what the spreadsheet looks like.Example doc.xlsx

View 2 Replies View Related

End Right Skip Blanks

Nov 26, 2008

I have a range I would like to select but this includes blanks. I would like the VB to skip these blanks and find the last value / text in this row and then select that entire row.

Here is part of the code I have:-

View 3 Replies View Related

Skip Blanks

Apr 9, 2008

I have this code that checks for cells that "" and then transfers a range to a separate sheet. I am running into problems if in the specified range all cells are "". How can I update this code to allow for all cells in the range to be "" without giving an error?

Sub Search_Notes_Main()
Application.ScreenUpdating = False
ActiveWorkbook.Sheets("Analyst Main").Select
Dim ConstantCells As Range, Cell As Range
Set ConstantCells = Range("B11:CX11").SpecialCells(xlConstants)
For Each Cell In ConstantCells
If Cell.Value "" Then Cell.Select
ActiveCell.Offset(-2).Range("A1:A4").Copy
ActiveWorkbook.Sheets("Notes & Ticklers Upload").Select
Range("B22").Select

View 9 Replies View Related

Concatenate A Range Skip Blanks

May 22, 2009

I have copied the following codes to create a Function of "Concatenate a Range Skip Blanks". However, I humbly seek help to add "," in between every word and also take away the empty space when there is only 2 words are concatenated. Pls refer to my attachement for easy understanding.

View 6 Replies View Related

Copy List And Skip Blanks

Mar 24, 2014

Is it possible to insert a formula that skips blanks while copying a list? For example: If I have a list and make a column next to the list to put an "x" in if I want to see that info in another list, is there a way to pull the info over with a formula and skip blanks to create a clean list?Color

Include in new List?

Revised List

Red
x
Red

Green

Blue

Blue

[code]....

View 1 Replies View Related

Skip Any Blanks Rather Than Count Them In The Average

Jan 16, 2007

I want to figure a class average for a test, but I have students that have moved. My Excel is automatically counting them as a zero. How can I program/tell Excel to skip any blanks rather than count them in the average?

View 9 Replies View Related

Can (xlUp) Skip Blanks And Zeros

Feb 12, 2007

Is it possible to run Range("A64000").End(xlUp).Select and have it skip the blanks and zeros until it hits an actual number?

View 9 Replies View Related

Paste Special Skip Blanks Not Working

Apr 3, 2014

We have a document template set up in excel which we have to use to accompany documents/drawings issued to customers. I have a macro set up to copy the cells required in the template and create a new tab with our company reference as the tab name, then copy and paste the relevant data into the log.

We could be issuing one or up to 10 documents at the same time to the customer, therefore there are between 1 and 10 rows which could contain data. Due to this, when pasting to the log, I have asked the macro to choose the next available row and paste as values and skip blanks.

However, when there are blanks on the template, it is copying all these cells and I am being left with lots of blank rows in the log. Is there anything I can do to correct it?

View 3 Replies View Related

Simple Formula To Skip Blanks (array)

Jul 16, 2013

I have a row with numbers
1
2
3
5
6
7
8

What is the formula to get then on another column as
1
2
3
5
6
7
8

View 3 Replies View Related

Sign Flip Macro To Skip Blanks

Jul 11, 2007

I have been using this macro, which works perfect:


Sub Signflip()
Dim cell As Range
For Each cell In Selection
If IsNumeric(cell.Value) Then cell.Value = -cell.Value
Next cell
End Sub

It allows me to select cells and flip from neg to pos, pos to neg, and it won't error out on text cells. Great little macro.

However, I don't like how it puts a zero in blank cells. It slows down the macro when I select large areas. Is there a way to make this macro work the same way but skip over empty or blank cells and not enter a zero.

View 9 Replies View Related

Skip Blanks & Copy To Next Empty Cell

Aug 23, 2006

Have the marco (see Code below)that I am trying to pull only records that have a "y" in a column. The problem I am haivng is that I also get cells that are blank and rows are skipped if the cell is blank or not "y".

Have tried searching for an answer or example for what I want to do. Looked at autofilter but had no luck.

Sub Macro1()
Set rd = Sheets("ActiveHerd") 'set read data sheet as rd
Set wd = Sheets("SaleSheet") 'set write data sheet as wd

For i = 12 To Range("A65536").End(xlUp).Row ' set i to the last row in column A
If UCase(Cells(i, 1)) = "Y" Then Range("A" & i & ":c" & i).Copy Destination:=wd.Range("AA" & i)
Next i

End Sub

View 9 Replies View Related

Copy And Paste Only Values With Option Skip Blanks

Dec 28, 2013

Below is the macro code in which the code is segregating the data page wise i want the below changes:

> macro should copy and paste only values with the option skip blanks.

Private Sub CommandButton1_Click()
Dim j As Long
'Setup the loop to loop through the Areas
For j = 1 To Columns(1).SpecialCells(2).Areas.Count
'Add a new WorkSheet

[Code] .....

View 2 Replies View Related

Combine Multiple Rows To One Row With Blanks In Some Reference Columns

Jun 4, 2014

combining multiple rows of related data into one row but have not seen one that matches my situation. My experience level with excel only includes some basics like vlookup, match and recorded macros, although I have used vba code for a macro that met my needs. I have a parts list for a PCB that has many different parts. Some of the parts are used multiple times across different reference designations("Reference" column in the file). I have shown a desired format and the original format below. Since the item number has blanks across the reference designators I haven't found a solution that would work for me.

Desired output:
Item
Quantity

[Code]....

View 9 Replies View Related

Pivot Source Data Reference In One Cell

Sep 9, 2009

In cell A1 I have a forumlar which equals 'A2:F1465' which is the range of my data, how can I get a pivot table to use this for it's values as when I do it normally it asks me to manually select the range as above?

View 2 Replies View Related

Copy Chart To New Sheet & Have Charts Source Data Reference It

Jan 24, 2008

Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.

View 3 Replies View Related

Excel 2010 :: Pivot Tables - Data Source Reference Is Not Valid

Jun 27, 2012

I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?

View 2 Replies View Related

Skip X Columns In Formula Reference When Dragging Across Columns

Nov 15, 2009

How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.

View 3 Replies View Related

Get Macro To Skip Over Blank Cells

May 19, 2014

I Have the following macro conducting web queries. As the list of websites is spread out I need to get the macro to skip over blanks?

VB:

Sub Top5Investors()
'
' Top5investors Macro
'
'
Dim Erw, Frw, Lrw
Frw = 1
Lrw = Range("A" & Rows.Count).End(xlUp).Row
For Erw = Frw To Lrw

[Code]...

View 1 Replies View Related

Formula To Skip Blank Cells

Mar 9, 2011

I'm looking to create a formula that will skip past any blanks until it finds the latest and most up-to-date value.

Some context: I wish to return a latest estimate value to a cell (A5), and this value is updated quarterly. Let's say that the quater 1 value sits in cell A1, Q2 in A2, Q3 in A3 and Q4 in A4. I wish cell A5 to display the latest estimate as soon as a user updates it on a quarterly basis, but default to the previous quarter's estimate if that latest view is unavailable.

I've tried using some IF(ISBLANK...) combinations but am getting nowhere !

NB want to try and avoid Macros across this worksheet so a formula solution would be best.

View 5 Replies View Related

Drag And Skip Cells When Using AutoFill?

Sep 15, 2013

I have data in a row - A1 B1 C1 D1 etc.

And a SUM function in row 2 - =SUM(A1:C1)

I want to be able to drag this function to calculate SUM in blocks of 3 e.g.

=SUM(A1:C1), =SUM(D1:F1), =SUM(G1:I1)

View 7 Replies View Related

Skip Blank Cells When Sorting

Sep 21, 2013

I have this code to sort numbers from smallest to largest but i need it to ignore blank cells.
Sub sort1neg()
'
' sort1pos Macro
'
'
Range("a4:aq174").Select
ActiveWorkbook.Worksheets("sort").Sort.SortFields.Clear

[Code] ........

View 1 Replies View Related

Skip Blank Cells Paste

Apr 16, 2006

I have a range that I need to copy to a new worksheet. It basically looks like steps going across the sheet. Whenever I skip blank cells during the paste to the new sheet Excel does not skip anything. Any ideas on how I would shift all data to be on the left side of the without copying the blank cells.

View 5 Replies View Related

Skip Empty Cells When Pasting

Nov 30, 2006

I`m trying to do is paste a formula accross multiple columns whilst skipping the empty cells. I tried using the "skip blanks" tick box but it still filled in the empty cells??

View 2 Replies View Related

Cell Reference- Able To Reference Two Cells To The Left Even As More Cells Are Added

Jun 11, 2008

I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C

As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.

I also need E (which has also shifted over one) to sum A,B,C, and C2.

Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.

View 9 Replies View Related

Skip Blank Cells In Chart Data

Jan 29, 2011

I have a column of data that I want to display as a chart. However, there are some blank cells in the column. When I use a simple line chart, the chart drops the line all the way down to zero for the blank cells. If the blank cell is B4 in column B, is it possible to make excel ignore that cell and connect B3 and B5 with a straight line?

View 6 Replies View Related

Unable To Skip Blank Cells While Pasting?

Dec 30, 2011

I am facing a problem in pasting.

Col A Col B
aa
bb
cc
dd
e
ef
fg
h
g
h

my data is having blank cells. when I am trying to paste it in other column it is getting pasted as it is. I don't want to copy the blank cells. It should be like Col B.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved